Hire Local CAD Designers near Stellenbosch, Western Cape

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product Design,... Read more

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product Design, - Industrial Design, - Mechanical Design, - Rendering, - Strength Analysis, - Technical Product Documentation - 3D Printing and prototyping

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit m... Read more

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit my website on www.madcaddesigns.co.za

My professional highlights in each field: Architectural - Eros Airport Terminal & Hangar, Namibia Interior - Pepper Club Hotel, Cape Town Mechanical - Lug Descrambler, M&M, Cape Town Process - Darlin... Read more

My professional highlights in each field: Architectural - Eros Airport Terminal & Hangar, Namibia Interior - Pepper Club Hotel, Cape Town Mechanical - Lug Descrambler, M&M, Cape Town Process - Darling Brew Craft Beer Plant, Darling

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing p... Read more

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing products of different niches, I have become a versatile CAD designer with expertise in multiple sectors including sheet metal, fibre laser cutting, sheet metal bending, CNC milling and CNC turning as well as 3D printed enclosures for outdoor applications. Software that I've worked with: - Autodesk Inventor - Autodesk Inventor CAM Suite - AutoCAD - Autodesk Fusion 360 - Ultimaker Cura - Keyshot Tasks / roles that I can fulfil: - Drafter / Drafting Tasks - Product Design - Sheet metal and bending designer - Reverse Engineer / Reverse Engineering - CAD Design - DFM / Design For Manufacturing - Design for 3D printing - Design for CNC Machining and CNC Turning - Design for Injection Moulding I was involved in: - Creating flat patterns for laser cutting, - Bend drawings for the bending team, - Assembly instructions for the assemblers - Steel tube cut list's for the manufacturing team, - Designing parts and then programming and running them on our CNC milling machine, - Designing optimised parts for 3D printing - Keeping an eye open for design optimisations in general I refined my skills further with my time working hands on with the production process, seeing and deeply understanding the processes involved in building your final product. This has taught me to always imagine the assembly process and keep an eye out for any design choices that could make manufacturing more difficult or downright impossible. My hands on experience comes from spending time working on a Sheet Metal Fibre laser, producing the flat parts for assembly as well as hand on assembly in an IoT device that was manufactured using 3D printing.

B.Eng at NWU South Africa. Was part of NWU Solar Car Team and I was a driver myself at the World Solar Challenge in 2015. I am very sharp with CAD and you will not be disappointed.

B.Eng at NWU South Africa. Was part of NWU Solar Car Team and I was a driver myself at the World Solar Challenge in 2015. I am very sharp with CAD and you will not be disappointed.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

At AJ Studios, our passion for precision drives us in the realm of 3D Modeling & Design. Our expertise spans across multiple sectors, with a particular focus on architectural design, gaming, and corpo... Read more

At AJ Studios, our passion for precision drives us in the realm of 3D Modeling & Design. Our expertise spans across multiple sectors, with a particular focus on architectural design, gaming, and corporate projects. We are artisans of the virtual world, where the boundary between the real and the rendered is continuously blurred by our commitment to lifelike accuracy. Our dedication is unwavering when it comes to achieving the pinnacle of realism and exceeding our clients' expectations. We don't just strive for satisfaction; we push the limits of imagination to ensure that our clients are not just content but truly captivated by the worlds we create for them

Graphic design (all aspects) architectural 3d rendering floor plans house design Presentations Power Point Logo designs Digital Art

Graphic design (all aspects) architectural 3d rendering floor plans house design Presentations Power Point Logo designs Digital Art

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders, di... Read more

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders, dimensioned layouts, and reports or explainer documents for manufacturing. My many years of experience in silversmithing have given me a thorough understanding of small-scale metal work. My scientific and mathematical background have led me to favour parametric and algorithmic design tools (specifically Grasshopper), which allow me to create complex organic patterns and forms. I am a fast learner and excellent problem-solver, with a strong design sense and wide range of interests. I also tutor students in how to use these tools

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

3D Plastic injection mould designer for all possible product requirements. 3D Assemblies Drawings. Project leader for PLC driven custom machines building Experience May 2000 – April 2001 Alplas Pla... Read more

3D Plastic injection mould designer for all possible product requirements. 3D Assemblies Drawings. Project leader for PLC driven custom machines building Experience May 2000 – April 2001 Alplas Plastics, C.T. S.A.

A dedicated and results-driven CAD Design, CAM programming and CNC Engineer with a strong background in software and hardware integration across Information Technology, Telecoms, and Industrial Engine... Read more

A dedicated and results-driven CAD Design, CAM programming and CNC Engineer with a strong background in software and hardware integration across Information Technology, Telecoms, and Industrial Engineering sectors. Highly skilled in utilizing AutoCAD and other design tools to enhance product development and improve efficiency in mechanical and industrial designs. Passionate about leveraging software and hardware solutions to optimize customer experience and operational performance. - Proficient in writing software programs, debugging, and performing statistical analysis to drive improvements in product functionality and performance. - Extensive experience with Telecoms GSM/UMTS Circuit Switched Core Network software, parameter configuration, roaming, and maintenance, particularly with Ericsson and Huawei systems. - Expertise in CNC Industrial Engineering implementations, microcontroller programming, and sensor-based software applications. - Proven project management experience on both national and international levels, successfully leading Telecoms core network projects, including platform startups, network testing, and integrations across MTN Nigeria, MTN Cameroon, and MTN South Africa. Skilled at collaborating with cross-functional teams to deliver high-quality results and continuously seeking opportunities to apply knowledge and technical expertise to drive innovation and success in CAD design and engineering projects.

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast... Read more

Studied mechanical engineering at the North West University in Potchefstroom, South Africa. Have 6 years design experience in two composite manufacturing factories in the aerospace and yacht mast industry. Everything I design I try to make aesthetically pleasing, practical and mechanically strong enough for the job!

CAD Designer primarily in the Jewellery industry. Proficient in: Rhino Keyshot

CAD Designer primarily in the Jewellery industry. Proficient in: Rhino Keyshot

I am an Electric and Electronic Engineer with experience in 3D printing and plasma cutting. I do part-time designs for 3D printing and plasma/laser cutting. I have a good work ethic, am detail oriente... Read more

I am an Electric and Electronic Engineer with experience in 3D printing and plasma cutting. I do part-time designs for 3D printing and plasma/laser cutting. I have a good work ethic, am detail oriented and work well under pressure. I am passionate about the work that I do and look forward to expanding my knowledge and experience in the field.

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make yo... Read more

Are you looking for someone who understands your requirements, knows how to listen, and asks the right questions? Look no further as I’m the right freelancer for your business. My goals are to make your Dream Project a reality by using my manufacturing design experience to develop your fantastic product cost-effectively. I design parts often used in the Professional and Manufacturing environment. Whether it is a single part of an assembly of numerous components, I will add value to your business. I have a crossover of skills that make me very effective. Here are some of my essential skills: • 3D Modeling (Solid Works 2021) • Manufacturing Drawings & Specifications • Design for Manufacturing (DFM) • Design for Assembling (DFM) • 3D Printing & Additive Manufacturing • Manufacturing Jiggs • Problem Solving • Critical Thinking About Me: I’m an honest person that enjoys working in the manufacturing environment that genuinely wants to help others around me. Working in this industry for the last 17 years has inspired me to start my Freelance with a new vision as a free-thinking individual to pursue new interests and add value to my customers. Productive collaboration drives me and gives me energy. I’ll take the time to gain a personal interest in your business, which will help me make significant contributions. I’m incredibly innovative, dedicated and pride myself to service excellence and attention to detail Have a nice day! Kobus Fourie Your innovative CAD Partner.

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such as... Read more

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such as mechanism design, systems engineering, control systems, engineering management, product design, mechatronic design, and environmental engineering. I am excited to use the knowledge that I have gained in solving real-world problems. Although I design medical devices for the growing South African healthcare sector, I wish to improve the skills that I don't use as much in this profession. This means staying sharp with tools such as CAD (Autodesk Inventor), Scientific Computing (Matlab & Python), and Design for Additive Manufacturing (Inventor & Cura)

I have over 16+ years working experience in the Building and Construction Industries especially in the Residential and Telecommunications with over 11 years experience in Civil and Structural Engineer... Read more

I have over 16+ years working experience in the Building and Construction Industries especially in the Residential and Telecommunications with over 11 years experience in Civil and Structural Engineering (multidisciplinary) as a Professional Architectural Draughtsman (Pr. Arch. Draught). I am Registered with SACAP since 2006. My expertise ranges from Drawing Office Manager, Planning, Costing, Site Supervisor, Health & Safety.

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an appro... Read more

I’m Thembani Banda, I am an 3d designer. I’m passionate about beautiful aesthetics and genuine design solutions. I have a strong foundation in the design process and its various methods, and an approach in hand drawn sketching and illustration skills. I’m very experienced with CAD programs such as Revit Architecture, Sketch-up, Zbrush, Substance Painter & Designer, Megascane, Solidworks, 3ds Max, Keyshot & Vray

See Youtube channel: gb_renders Rendering, design, photorealism, animation, arch-viz, etc. Software: Blender, Fusion 360, daVinci Resolve etc

See Youtube channel: gb_renders Rendering, design, photorealism, animation, arch-viz, etc. Software: Blender, Fusion 360, daVinci Resolve etc

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory... Read more

Bring your ideas to life! I am a mechanical engineer with over 20 year’s experience in design, manufacturing and management. If you have an idea that you wish to make a reality or an existing factory owner looking to improve your production systems and manufacturing methods, I can help you. Having a great deal of first-hand experience operating machine tools allows me to fully embrace the principles design for manufacturing and assembly resulting in practical and cost-effective designs. I am passionate and proud to be a Mechanical Engineer with extensive knowledge of engineering principles, theories, specifications and standards. My goal is to employ sound engineering, design and management principles to allow South African companies to become competitive and recognized in the global marketplace. This is not merely a platitude, but a sincere desire to foster a culture within companies to develop and maintain a World Class Standard of excellence. The services I can offer include: • Product conceptualization and industrialization (from an idea to reality) including design reviews and failure modes and effects analysis (FMEA). • 2D and 3D computer aided design (CAD). • 3D rendering and animation. • Design calculations and finite element analysis (FEA). • Access 3D printing and machine shop for prototyping and production. • CNC Lathe and Mill Programming (depending on machine controller). • Manufacturing process and efficiency improvements. • Business process improvement. • Production workflow and routing including datapacks for each production stage detailing methods and Inspection requirements. So, if it is a simple 2d drawing you require, a full product industrialization service or you are looking to improve your manufacturing systems and/or business processes, reach out and contact me.

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up fairly... Read more

I am a well rounded individual, that finishes given work in the shortest time possible. With extreme attention to detail and accuracy I work well alone aswell as in a team. I worked my way up fairly fast from single component drawings for a sheet metal fabrication company, to heading up my own projects always ensuring my projects are done in time.

25 years experience in the Civil Engineering Industry providing AutoCAD support and 15 years as a GIS Technician (ArcMap) support. I have recently become full time freelancer providing the above suppo... Read more

25 years experience in the Civil Engineering Industry providing AutoCAD support and 15 years as a GIS Technician (ArcMap) support. I have recently become full time freelancer providing the above support services.

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management