Hire Local CAD Designers near Germiston, Gauteng

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my... Read more

Accomplished a lot for the Automotive industry, designing racing vehicles and special parts for the Automotive industry. My strengths are always to add value for client projects. Have been lucky in my career to be exposed to many disciplines and master them.

As an innovative editor, visual storyteller and post production specialist in terms of grade, CGI and VFX, I love challenges that expand my skills and have a keen interest in new film technologies.... Read more

As an innovative editor, visual storyteller and post production specialist in terms of grade, CGI and VFX, I love challenges that expand my skills and have a keen interest in new film technologies. I started my editing career while signed to Gallo as an artist with the band Karoo with our first music video - 'Mission Impossible'. Fascinated by film I started from the ground up working as an all-hander on films like 'Dangerous Grounds' and 'The Making of a Mahatma'. After spending two years working on numerous sets I finally found my way into the editing suite. Here I gained hands-on skills by editing and delivering many hours of diverse content for television. I had found my passion. I got my first film break with "lokshin bioskopes movies" like 'The Conman' and 'Foreign Hearts'. This led to the acclaimed Afrikaans film 'Die Spook van Uniondale' which I both edited and graded, including all VFX work in the film, which was the first film I edited for producer Dumi Gumbi. 'The Dunning Kruger Effect' was next, 'Mrs Right Guy' followed directed by Adze Ugah, which was a box office hit in South African theatres in 2016. I edited the SA/USA co-production, "Love By Chance" (Best Feature UMFF, Opening Night Film Houston Black Film Festival and GCUFF and Official Selection at Pan African Film Festival), a romantic comedy on screens across more than 30 cinemas in South Africa in 2017, as well as the psychological thriller, "The Tokoloshe" (13 Festivals incl: BIFAN, SITGES, Frightfest, Motel/x, LUND and Razor Reel ), beautifully shot by award-winning South African cinematographer - Trever A Brown. This was an opportunity to edit a classically structured genre film that also involved major CGI and VFX. Other Films incl: 'Love Lives here', 'The Letter Reader'(Winner shnit Worldwide Shortfilmfestival), 'Life's a Drag(Winner, Sundance TV shorts)' and "Blessers"

I would like to introduce myself, my name is Erna Cahill. I am a draftsman residing in South Africa. I graduated from the Academic Institute of Excellence (AIE) in 2019. I earned a Certificate of C... Read more

I would like to introduce myself, my name is Erna Cahill. I am a draftsman residing in South Africa. I graduated from the Academic Institute of Excellence (AIE) in 2019. I earned a Certificate of Completion from the Institute and received a Bronze Award. I also earned a Certificate of Achievement(Multi-Disciplinary Drawing-Office Practice(N4 and N5). The certificate is issued by the Director-General of the Department of Higher Education and Training (South Africa) under the delegated authority from the Quality Council for Trades and Occupations (QCTO) I have gained knowledge on several AutoDesk Software programs and Graphisoft's ArchiCAD. I also have knowledge using Solidworks, unfortunately I do not have certification for this software (not yet) Thank you for your time and for viewing my profile. Hope to hear from you

I am a Database Admin that wants to start up my own Fitting and Turning Company. I have Completed 3D Modeling Online tutorials for quite a bit and I want to grow my skill set even more. Being... Read more

I am a Database Admin that wants to start up my own Fitting and Turning Company. I have Completed 3D Modeling Online tutorials for quite a bit and I want to grow my skill set even more. Being Precise, hard-working is how I accomplish each task I take on. Willing to learn and expand my knowledge with each and everything I do. I will go the extra mile to make sure the expected end results are met, and communicate clearly with Clients.

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes... Read more

I have a National Diploma in Mechanical Engineering from Central University of Technology (2014) and a Bachelor of Technology degree from the University of South Africa (2020). My experience includes working as an Apprentice Fitter and Turner in a Steel Manufacturing Company for over 2 years and then as a Junior Engineer at a Consulting Company for more than 6 years. Currently, I am employed as a Mechanical Draughtsman with MV Switchgear manufacturer starting June 2022. I am a lifelong learner and use my free time to acquire new skills through personal projects. My areas of interest include Mechanical Design, CAD Draughting, Finite Element Analysis, Structural Design, Scripting, and Automation. I am proficient in Autodesk Inventor, AutoCAD, Nastran, ANSYS, VB.NET(i-logic) and Microsoft Office

I am an interior designer specialising in the retail and corporate environment. This includes shop design - from concept design, 3d illustration, technical documentation and manufacturing drawings - t... Read more

I am an interior designer specialising in the retail and corporate environment. This includes shop design - from concept design, 3d illustration, technical documentation and manufacturing drawings - the complete package you need to transform an empty shell into a fully functioning, beautiful shop. For the corporate markets I provide space planning services accompanied with interior design to make your office environment the perfectly beautiful but, more importantly, functional and effective space. All our projects are include 3D illustrations and 360 degree panoramic visuals so you will know exactly what to expect of the design. For the architects, interior designers and project managers out there: I provide a contract interior design service based on hourly rates or per project. Do you have a busy month with an overflow of work, but not enough to justify opening up another design position in your company? Let me work for you under your banner. Contractors who need occasional design work but who do not have an in-house designer? I am the answer to the problem. I am based in Pretoria, South Africa which has the massive advantage to the international market of making my rates incredibly competitive due to the exchange rates. With modern technology including ▒▒▒▒▒, Teamviewer and the like, the globe is but a village and I can work remotely on projects regardless of the location.

I am a qualified Industrial Designer , I obtained a BA degree at The Open Window Institute. I am passionate about my industry and have a love for fine art. I am a hard-working, ambitious being who can... Read more

I am a qualified Industrial Designer , I obtained a BA degree at The Open Window Institute. I am passionate about my industry and have a love for fine art. I am a hard-working, ambitious being who can take on any challenge presented to me.

I specialise in: 3D Modeling/Design Jewellery Design and Manufacture CAD/CAM Rendering Rhinoceros 3D Gemvision Matrix V-ray Keyshot

I specialise in: 3D Modeling/Design Jewellery Design and Manufacture CAD/CAM Rendering Rhinoceros 3D Gemvision Matrix V-ray Keyshot

Designing shops, kiosks, Expos and 100rds of designs for clients and popular brands for the past 14 years. Designing in 3D, rendering for approval and supporting via cut- and manufacturing files and d... Read more

Designing shops, kiosks, Expos and 100rds of designs for clients and popular brands for the past 14 years. Designing in 3D, rendering for approval and supporting via cut- and manufacturing files and drawings.

I am a Turner / Machinist by trade and currently studying towards a career in both Mechatronics and Process Instrumentation at a local university. I started with technical subjects as early as high sc... Read more

I am a Turner / Machinist by trade and currently studying towards a career in both Mechatronics and Process Instrumentation at a local university. I started with technical subjects as early as high school and progress onto to an entry level position in the drawing office of a automation company where I gained experience in methods of modular design and CAD packages such as Solid works and Autodesk Inventor. I enrolled into an apprenticeship program where I obtain my red seal in Turning and continued to increase my exposure to FMCG based manufacturing companies by working in various industries such as automotive , pharmaceutical and general manufacturing companies. I have been involved in both the installation, commissioning and maintenance of manufacturing equipment in these industries and carry knowledge beyond the scope of just my current qualification. Therefor I have decides to enrolled at me local university in order to increase my theoretical knowledge on Electrical Engineering, specializing in Mechatronics and Process Instrumentation. My main interests is in industrial electronics and design of efficient and maintenance friendly equipment that is easily repaired and mostly modular in design.

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python,... Read more

Creative design has my attention. Enjoy and prefer design with a visual appeal as well as functional mechatronic purpose. ===Skills=== CAD (Mainly solid works (90%) and Catia (10%)) Software (Python, C++) PLC programming (LabVIEW, Siemens, others) Embedded design (Atmel, Microchip) Simulations (FEA, Motion) CNC (hobbyist) Animation and rendering (Blender [in progress]) ===Experience=== Process automation, automotive, food, packaging industries, product development.

With about 10 years experience in Mechanical Engineering Design, I have been involved in manufacturing process design as well as component design for the mining ventilation, utilities, HVAC, and proce... Read more

With about 10 years experience in Mechanical Engineering Design, I have been involved in manufacturing process design as well as component design for the mining ventilation, utilities, HVAC, and process cooling industries. I have the capability of not only designing, but also engineering with finite element analysis and ensuring manufactuarability of the design.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

Design and Draughting Services on AUTOCAD, INVENTOR and MICROSTATION. Specializing in Modeling, calculations, concept design and FEA.

I finished my studies in Industrial Design at the University of Johannesburg in 2008. I have been building experience working as an Industrial designer in various factories, developing designs from th... Read more

I finished my studies in Industrial Design at the University of Johannesburg in 2008. I have been building experience working as an Industrial designer in various factories, developing designs from the conceptual phase, right through to production and installation. While accumulating real-world manufacturing experience, I have been building my freelance career for more than 10 years. Expanding my field of expertise into Graphic Design, Product Development, Materials and Manufacturing knowledge, Packaging Design as well as Point of Sale, and Exhibition Design.

1) 2D drafting and drawing is the process of creating and editing technical drawings, as well as annotating designs. 2) Professional drafting services, ranging from simple 2D Drawings through to compl... Read more

1) 2D drafting and drawing is the process of creating and editing technical drawings, as well as annotating designs. 2) Professional drafting services, ranging from simple 2D Drawings through to complex 3D Models and detailing. 3) From Digital Prototyping to rapid prototyping is the fastest and most cost-effective way to turn great ideas into successful products. 4) Drive innovation with a single, accurate 3D digital model to use at every phase of new product development. 5) Quickly refine ideas via combined parametric, free-form, and direct editing, and speed designs into production. 6) Design, visualize and simulate products before releasing them to Manufacturing. 7) Accurately capture and share ideas with others for input and collaboration with cloud-based product lifecycle management. In today's world of globalization, one might ask why not outsource instead in order to lower overhead cost, produce higher-quality projects with lightning-fast turnaround time.

I am a South African industrial designer from Pretoria .I have been working as a freelance industrial designer and rendering specialist since 2015, during this time I have worked on various projects... Read more

I am a South African industrial designer from Pretoria .I have been working as a freelance industrial designer and rendering specialist since 2015, during this time I have worked on various projects in a wide range of industries ,mainly focused on industrial and commercial products as well as consumer products and architecture.I pride myself on a strong work ethic and provide top quality work in short periods of time, I am familiar with most manufacturing methods as well as the design constraints surrounding them and design accordingly.

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any par... Read more

I have 20 years experience in the Drawing Office that can be put to use in delivering quality Drawings for your Projects. The advantage is: - I have capacity and skilled personnel to assist on any particular project and help you deliver Projects on time. - My main Field of stronghold is Mechanical Engineering, Architectural and Fire Protection and have 4 fulltime skilled inhouse draughtsman. - I also have a network of skilled draughtsman in different disciplines of Draughting ready to be engage with your projects. - I also have capacity to Plot drawings in large format paper size (A0) which makes it easy if you need to submit drawings in hard copy.

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been workin... Read more

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been working on Inventor for four years and worked in the trailers industry for two years making truck trailers, for example, semi-trailers, abnormal trailers, low beds. Then switch to machine designs like plastic welders, vacuum formers, which also included electric diagrams. Can write CNC programs and NC programs. I Believe the customer comes 1st in all projects, and I aim to supply the best quality of work I can provide to the customer.

I love my work, designing is my passion, I would not have done it for more than 30 years if I did not love it. In my career to date, I have had the opportunities to have worked in a wide range of indu... Read more

I love my work, designing is my passion, I would not have done it for more than 30 years if I did not love it. In my career to date, I have had the opportunities to have worked in a wide range of industries within the mechanical design field and have learned from the best.

Drawing from a rich background in goldsmithing, I embarked on my journey as an apprentice, mastering the intricacies of craftsmanship from the ground up. It was during this formative period that I fir... Read more

Drawing from a rich background in goldsmithing, I embarked on my journey as an apprentice, mastering the intricacies of craftsmanship from the ground up. It was during this formative period that I first encountered CAD software, specifically Rhino3D, which revolutionized my approach to jewelry design. The transition from traditional techniques to digital platforms opened up a world of possibilities, igniting my passion for 3D modeling. Driven by a relentless curiosity, I delved deeper into the realm of digital design, pursuing additional training in 3D modeling techniques and discovering the transformative power of poly-modeling with 3DS Max and rendering with Vray. This newfound knowledge empowered me to not only design jewelry for 3D printing and casting but also to expand my horizons into product design. With a blend of traditional craftsmanship and cutting-edge technology, I seamlessly integrated CAD into my workflow, leveraging its capabilities to craft intricate designs and generate photorealistic renders. Recognizing the untapped potential of my skills, I transitioned into offering my services as a 3D designer, specializing in designing and rendering jewelry and various products. Today, armed with over 9 years of experience, I continue to channel my passion for design into every project I undertake. I invite you to explore my portfolio, a testament to my journey from apprentice to seasoned 3D artist, and discover the artistry and precision that define my work.

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making t... Read more

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making them safe and economical. I have worked on large industrial projects for the likes of SABMiller, Acelor MITAll, LDA Lubango. Both local to area residential and international in countries like Nigeria and Angola. Dealing with all aspects of the project at hand, from liaising with equipment suppliers in Germany, to negotiating and supplying design details with steel suppliers in India. I have the experience and knowledge to get your RCC design work done expediently, safely on time.

Having completed my Bachelors and Master’s Degrees in Architecture (Professional) at the University of The Witwatersrand in 2016, I now have over 5 years’ experience working in the field using a combi... Read more

Having completed my Bachelors and Master’s Degrees in Architecture (Professional) at the University of The Witwatersrand in 2016, I now have over 5 years’ experience working in the field using a combination of Autodesk Revit and AutoCAD software for technical drawing and combining these with Sketchup, Lumion, Photoshop and InDesign for conceptual development and presentations. For several years I have been working as a Project Architect at a local architectural firm, where I lead a team responsible for various residential, industrial, and commercial projects. From small-scale interior design jobs of a hundred square meters to significant commercial developments of thousands of square meters, I ensured no design problem was without a solution. While I have enjoyed this role as Project Architect, recently I have been interested in furthering my knowledge and experience by exploring freelance opportunities (both locally and internationally). My years of work thus far, have given me experience in conceptual design, bespoke detailing, and technical resolution. I also have a deep passion for construction, "making" and understanding how things fit together. I believe great architectural design is fundamentally about story telling. I always aim to design buildings that, when stripped bare of all artifice, have spatial flows that are functional, structures that are beautiful and relationships to their surroundings that are timeless. Along with the above ethos, I apply diligence and attentiveness to every project with which I engage. I am also registered with the South African Council for the Architectural Profession as a Professional Architect. I would love an opportunity to collaborate. I hope to hear from you soon!

As a qualified Mechanical Designer & Project Manager with experience in South Africa and 5 years in the USA, there is much I can offer to an organization that provides me a constructive workplace for... Read more

As a qualified Mechanical Designer & Project Manager with experience in South Africa and 5 years in the USA, there is much I can offer to an organization that provides me a constructive workplace for communicating and interacting with customers and people. I have 8 combined years of Super Yacht manufacturing exp and Emergency Fire Fighting vehicle design and manufacturing. I can also create and 3Dprinted Prototypes and assist with patent inquiries. Please feel free to look through my portfolio.

Rene Kruger is interested in a wide range of mechanical engineering. This love for mechanics and drawings developed through getting employed at a gutter company about 4 years ago. Rene's first major p... Read more

Rene Kruger is interested in a wide range of mechanical engineering. This love for mechanics and drawings developed through getting employed at a gutter company about 4 years ago. Rene's first major project was designing, drawing and assembling a fascia roll forming machine, which was followed by a molding machine as well as a downspout machine. After getting his first freelance request done and paid for, Rene is now setting himself up as a freelance designer on AutoCAD and Solidworks. Rene uses time effectively and works precise. You are sure to be satisfied with his work. Rene Kruger: for all your custom design needs, in a blink of an eye.

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a f... Read more

I've Designed and Manufactured a large spectrum of the Engineering field. A few sectors include Mining, Solar Field, Film Industry, Food Industry as well as precision and general engineering. I am a firm believer that with first hand experience in manufacturing principles and processes, products are better designed not only for end user but also for ease of manufacture. This offers cost savings throughout the production cycle, saving money and most importantly time.

Camilo has 20 years of experience in Architectural design developing projects and managing teams, for achieving desired project outcomes, on large infrastructure projects from concept design to constr... Read more

Camilo has 20 years of experience in Architectural design developing projects and managing teams, for achieving desired project outcomes, on large infrastructure projects from concept design to construction. He has strong passion for digitalisation of the construction industry, with a strong emphasis on Building Information Modelling (BIM) and enhancing efficiencies in the design and construction processes. Firmly believe in leveraging technology to streamline workflows, improve collaboration, and deliver exceptional results. His experience includes the design of unique mega multidisciplinary projects including building and infrastructure projects. Streamline commercial, sports facilities, industrial, corporate, educational, health, residential architecture, and urban design operations whilst acting as Lead Design Architect and Project Manager. Camilo is experienced Identifying business opportunities and leverage leadership to manage multidisciplinary teams. Camilo has vast experience in international ventures that has honed his ability to navigate cultural nuances, adapt to varying regulatory frameworks, and collaborate effectively with diverse teams of large-scale projects, including environmentally sensitive projects. His work experience extends beyond South Africa, encompassing diverse regions such as Congo, Nigeria, Somalia, Mozambique, Uruguay, Argentina, and Dominican Republic. Camilo is digitally savvy and has worked on a variety of design software including Revit, AutoCAD, Rhinoceros, Grasshopper, SketchUp, ArcGIS, MS Project, and Microsoft Office. Camilo has a sound knowledge in various construction could management systems, such us Autodesk Design Cloud, Autodesk Build, Catenda Hub, OpenSpace and Solibri.

I am a founder of CAD 360.

I am a founder of CAD 360.