Hire CAD designers & engineers in Selma, Alabama

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimiza... Read more

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimization and thoroughness.

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufact... Read more

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufacturing companies without a single rejection from the USPTO. All of my work is done in 3D using Solid works. I also do freelance product development work for individual inventors and manufacturing companies.

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet... Read more

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet metal components and assemblies for the Work Truck industry. Currently, I am employed through a military contractor that develops SATCOM systems for various branches of the U.S. Military.

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involv... Read more

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involve and use in my life beyond hobby level. I have used this to create simple mounts for my GoPro, a couple electronics enclosures, and a more complex structure like a servo controlled robotic arm that I am currently working on and my CNC machine that was mostly 3D printed. I am currently preparing to take a test to earn the CSWA (Certified Solidworks Associate) and after completing this I plan on taking the CSWP (Certified Solidworks Professional) as well.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years exp... Read more

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years experience in multimedia graphic design, with a Bachelor's degree. My experience allows me to have a quick turnaround and the highest quality for all my clients. I produce work in Print, Video, 3D Modeling and Animation, 2D animation, Presentations (PowerPoint and PDF), Web and other mediums. Online Portfolio: https://www.behance.net/wsfuller Walter Fuller

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundre... Read more

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundreds of sub assemblies and ranging in price for a few dollars to $1M. Additionally, I am well versed in producing photo realistic renderings of products for marketing purposes. I pride myself in providing thorough and accurate deliverables by taking the time to fully understand the challenges my clients face and how to provide the best solution possible.

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experien... Read more

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experience modeling executive furniture for a very well known designer on the Pacific Coast, I have become exceptionally proficient at 3D modelling from minimally detailed hand drawn illustrations. I posses a mixture of artistic creativity and knowledge of form and definition makes me the perfect candidate for the development of your 3D Product Concepts. I excel at lighting and rendering at the photo-realistic level and with an additional 10 years of graphic design experience in magazine, business card, print and promotional layout, I can give your ideas the kind of edge and presentation that will draw the eye of even the most discerning and prudent of investors. I have direct connections for rapid prototyping and injection molding through cadmodels.com, I am one of the 10 elite designers featured on the website. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒, you can email me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or reach me at 541 778 0413

With 20+ years of design and engineering experience, Parabolic Designs can assist in bringing products to life! We have a wealth of resources in design and engineering along with the ability to have y... Read more

With 20+ years of design and engineering experience, Parabolic Designs can assist in bringing products to life! We have a wealth of resources in design and engineering along with the ability to have your part built in production or prototyping phases. From art to part, we bring your product to life!

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also... Read more

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also adapt and apply the many methods and techniques I’ve acquired through study, and interest, in a broad spectrum of scientific disciplines; and can organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems

Over 35 years experience in mechanical design, drafting, fits, tolerance, GD&T expert! Over 25 years Cadd experience. Own a seat of Solidworks professional with full support. Cadd systems with ex... Read more

Over 35 years experience in mechanical design, drafting, fits, tolerance, GD&T expert! Over 25 years Cadd experience. Own a seat of Solidworks professional with full support. Cadd systems with experience: Solidworks Unigraphics ProE Autocad I am a very talented designer with knowledge to invent, and complete a job from start to finish. Over 35 years of machine shop experience.

CAD/CAM Student working in the field as a entry level programmer and engineering assistant.

CAD/CAM Student working in the field as a entry level programmer and engineering assistant.

With a degree in Civil Engineering from the University of Miami, Ricardo Jebb Bruno has been a Structural CAD Technician for over a decade. His expertise lies in AutoCAD, Revit, and SolidWorks, focusi... Read more

With a degree in Civil Engineering from the University of Miami, Ricardo Jebb Bruno has been a Structural CAD Technician for over a decade. His expertise lies in AutoCAD, Revit, and SolidWorks, focusing on structural analysis and building code compliance. Ricardo works at Metrix Structural Group, managing complex design projects. He actively volunteers with Habitat for Humanity and mentors students in STEM fields. He is also a member of both the American Society of Civil Engineers and the National CAD Society.

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your ne... Read more

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your needs. I am an Electrical Engineering student with experience in architecture, mechanical design, and piping. I also own EDEN Engineering Group, and my clients will have the resources of experienced designers and student engineers at their disposal.

I am currently employed as a full-time Drafter at an Architectural company but I am seeking part-time work to help expand experience and to make extra money on the side. I received my Computerized Ass... Read more

I am currently employed as a full-time Drafter at an Architectural company but I am seeking part-time work to help expand experience and to make extra money on the side. I received my Computerized Assisted Drafting Certificate through Buckeye Career Center, and then continued on with my career as an employed drafter for about 3 years and counting. Since my projects belong to the companies that I work with, I am not able to attach any work samples to my profile or proposals, but I would love to discuss the different type of projects I have worked on (including Amazon distribution centers, LAX airport expansion, Union Hospital, and other projects in many locations from Santa Monica, to New York City.). Aside from the experience I have, I am very dedicated worker and will strive to understand any necessary skills to complete the job correctly and efficiently.

I am a Mechanical Engineer with extensive Product Development and Manufacturing experience in a variety of industries including Medical Device, Consumer Products, Glass, and Test equipment.

I am a Mechanical Engineer with extensive Product Development and Manufacturing experience in a variety of industries including Medical Device, Consumer Products, Glass, and Test equipment.

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manuf... Read more

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manufacturers.

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-o... Read more

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-of-Autoclave (VARTM, Vacuum Only) car frames to autoclave cured aerospace structures. I have extensive experience in thermal analysis of brake systems, autoclaves, ovens, and tooling.

I am a graduate from the University of Texas at Austin in 2014. I studied Graphic & Industrial Design in the School of Fine Arts. Completed AutoCAD Certification at the New York Institute of Art & Des... Read more

I am a graduate from the University of Texas at Austin in 2014. I studied Graphic & Industrial Design in the School of Fine Arts. Completed AutoCAD Certification at the New York Institute of Art & Design.

I have more than 30 years of experience in various uses of Computer-Aided Design (CAD). For several years, I've been providing consulting services to a high-end home remodeling company in the Houston... Read more

I have more than 30 years of experience in various uses of Computer-Aided Design (CAD). For several years, I've been providing consulting services to a high-end home remodeling company in the Houston area to help their clients visualize home improvement projects before remodeling begins.

I was born and raised in the Birmingham, Alabama area. I speak fluent english and can help with out with any project you can throw my way. I have over 18 years of Drafting and Design experience. I... Read more

I was born and raised in the Birmingham, Alabama area. I speak fluent english and can help with out with any project you can throw my way. I have over 18 years of Drafting and Design experience. I have experience in the Structural, Civil, Electrical, Mechanical, HVAC, and Plumbing disciplines. I also have 6 years experience in 3D modeling.

Passionate about merging hands-on experience with data-driven decision-making to drive efficiency and innovation in the industrial sector. Currently pursuing a Bachelor's Degree in Industrial Leadersh... Read more

Passionate about merging hands-on experience with data-driven decision-making to drive efficiency and innovation in the industrial sector. Currently pursuing a Bachelor's Degree in Industrial Leadership at Jacksonville State University, while honing data analytics skills through the Google Data Analytics Certificate program. With a solid foundation in mechanical design and years of experience maintaining and repairing complex machinery, I bring a unique blend of technical expertise and problem-solving abilities to the table. My professional journey has spanned from managing equipment in high-stress environments in the U.S. Army to ensuring quality control and safety in manufacturing settings. Through these experiences, I've developed a keen eye for detail, a commitment to safety, and a strong understanding of the importance of preventive maintenance and efficient project management. As I transition into the industrial leadership space, I am eager to leverage my technical background and newly acquired data analytics skills to optimize operations, enhance safety protocols, and contribute to data-driven decision-making processes. I am excited to connect with professionals in the industry and explore opportunities to make a meaningful impact.

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always lo... Read more

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always looking for a new challenge.