Hire CAD designers & engineers in San Antonio, Texas

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plan... Read more

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plans to architects and homeowners for permit and construction. I can provide a very economical design that save money and reduce construction time for the following type of structures:- post tension slabs piers foundations Wood framing and Steel framing Roofing Wind Bracing systems Also I can do observation on the foundation and the structural framing and provide letter to the city as required.

Hi, I'm a part-time employee for architectural design. I have just graduated and I am very enthusiastic and looking to gain experience.I am skilled in 2D and 3D design and I work with these software... Read more

Hi, I'm a part-time employee for architectural design. I have just graduated and I am very enthusiastic and looking to gain experience.I am skilled in 2D and 3D design and I work with these software: 1)Revit 2)Autocad 3)Enscape I have a degree in architectural engineering from Bahoner University in Kerman, Iran Thank you for your time

Hello My name is Michael Smathers. I am a CAD expert. I have knowledge of softwares in Inventor, Revit, AutoCAD, Google Sketchup, and Mudbox. I have a bachelors in design and development and an assoc... Read more

Hello My name is Michael Smathers. I am a CAD expert. I have knowledge of softwares in Inventor, Revit, AutoCAD, Google Sketchup, and Mudbox. I have a bachelors in design and development and an associates in CAD. Feel free to message me.

10 years of CAD drafting experience.

10 years of CAD drafting experience.

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked wit... Read more

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked with 17 teams, being either the leader or teammate. Projects - Worked on a total of 16 robots in FTC robotics - Created multiple hyper-realistic CAD models of our robots, modeling textures, deformities, tolerances, appearances, materials, realistically moving in real-time, and dimensionally accurate to 0.001in - Instrumental team member in creating a successful 120lb, 4ft tall robot for FRC. - Designed a swerve drive, the most advanced drivetrain - Created three 150-page engineering notebooks of highly advanced technical documentation - Ran 21 studies of generative design, the world’s leading CAD technology - Created 87 animations and technical drawings showing how to build my teams’ robots and designs - Built an advanced robot with a fully rotatable scissor lift, extendable arm, and claw, and capable of driving - Created a robotic hand that models a human hand in real-time - Currently mentoring 10 high school robotics teams - Currently mentoring a Science Bowl team

I am a hard working, detail oriented mechanical engineering student looking to further my knowledge and understanding of complex concepts and ideas. I love the ability to challenge myself to gain adva... Read more

I am a hard working, detail oriented mechanical engineering student looking to further my knowledge and understanding of complex concepts and ideas. I love the ability to challenge myself to gain advanced skills and practical knowledge. I take pride in my hard work ethic and my ability to see concepts from a manufacturing point of view. I have both design and fabrications experience and I understand the lack communication and understanding regarding the ability to manufacture. I have had the experience in school of replicating a stapler in both 2D and 3D CAD, this was then 3D printed and was fully functional. Also I designed a CAD model of a go-kart that met the requirements of functional suspension and fully functional steering including linkage. I look forward to discussing future projects that allow myself to provide the best of my abilities and allow me to further my knowledge.

-Bachelor's degree at architecture -worked as interior designer for 2 years -worked with some offices at the middle east on many residential and industrial project

-Bachelor's degree at architecture -worked as interior designer for 2 years -worked with some offices at the middle east on many residential and industrial project

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work in... Read more

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work instruction drawings to represent multipart products and can include single part pieces with DXF files for CNC programming.

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighti... Read more

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighting, Compositing (Scene Assembly), Video Game Level Assembly, World Building, and Lighting. Software includes but not limited to 3D Studio MAX, Maya, Modo, Photoshop, ZBrush.

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japa... Read more

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japan when I turned 18, on invitation by Kobun Chino Otogawa to participate in an informal cultural exchange. Lived and worked with Kanjuro Shibata, bow-maker to the emperor, and Zen archery master in Kyoto for about 2 years. Instead of returning to the US as planned, I continued across fascinating Asia for 1 year and then studied and worked in Paris, France for 7 years as a fine artist. Then I returned to California, built on to a cabin and added a studio. Started an art and design studio and contract design service for manufacturers and suppliers to big box retailers for about 10 years. Then I moved to Austin, Texas and worked for Philips Lighting as head designer, (senior manager, R+D) for 11 years, and led a design team. My designs won a number of innovation and design awards and were on the cutting edge of LED lighting, as well as extremely market-successful. In 2017, decided to become an independent designer again, as well as an investor, (instead of moving to Boston to continue my rewarding corporate career with Philips). Since then I have been trading futures and options, and taking on design projects, as well as advising my wife with her startup business. I'll write a book about it when I turn 80 ;-)

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Design of packaging, mascots, 3D and advertising motion design with unique music for promotion on social networks, but animated billboards and exhibitions. I use the Blender 3D program.

Design of packaging, mascots, 3D and advertising motion design with unique music for promotion on social networks, but animated billboards and exhibitions. I use the Blender 3D program.

With over 20 years of experience in 3D CAD and product design, I can help you transform your concept into a fully manufacturable product. I have expertise in all aspects of 3D CAD modeling as well as... Read more

With over 20 years of experience in 3D CAD and product design, I can help you transform your concept into a fully manufacturable product. I have expertise in all aspects of 3D CAD modeling as well as detailed production drawing creation. I have experience with traditional cast parts to modern manufactured free form parts that utilize some of the most complex manufacturing techniques today. This allows me to spot manufacturing production problems before the design has been sent to the vendor for production. By avoiding back and forth design changes and production mistakes with the manufacturing vendor, this will help to save time and money on the production of your parts. It would be a great honor to have the opportunity to help you envision your product and see it through to production!

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept design... Read more

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept designs and installation, start-up, acceptance testing, and electrical safety Panel modifications and upgrades. Specialties: - Controls Engineering - Machine Safeguarding Electrical & Hard Guarding - Arc Flash Safety PPE Requirements - Power/Control Panel Design - Engineering Administration - Panel/Control System Upgrades - AutoCAD Electrical (2011-2013) - PLC Programming (Allen Bradley Micro, 500, Studio 5000) - Microsoft Office (Word, PowerPoint, Excel) - SCADA HMI Design (Wonderware, Panelview, C-More) - Wireless, Broadband network communication - Industrial Low Voltage Grounding and Short-circuit Protection - Arc Flash Panel Assessments (Easy Power) - Design Electrical Safety Controls - Interpret Electrical Single Line Drawings - Mange Small Capital Projects (< 150K) - Working Knowledge of NEC, NFPA 70E and NFPA 79 - Machine Guarding Team Leader - Root Cause Problem Solving - Supply Chain Management

Detail oriented Sheet Metal professional with experience in ductwork fabrication, using CamDuct, Bluebeam, and AutoCAD to deliver precise and efficient projects. Skilled in takeoffs, color-coded plan... Read more

Detail oriented Sheet Metal professional with experience in ductwork fabrication, using CamDuct, Bluebeam, and AutoCAD to deliver precise and efficient projects. Skilled in takeoffs, color-coded plan reviews, and coordinating complex mechanical layouts. Strong problem-solver with a keen eye for accuracy, committed to meeting deadlines and maintaining high-quality standards. Proven ability to manage projects from planning to execution, with a focus on efficiency and clear communication.

I fell in love with architecture in 1982. I did a mail-order class - in 8th grade! I now love the technology available, being immersed into a design I saw in my mind and can visually walk through. I a... Read more

I fell in love with architecture in 1982. I did a mail-order class - in 8th grade! I now love the technology available, being immersed into a design I saw in my mind and can visually walk through. I am not an engineer or architect, but I have studied enough over the years to apply my interior design skills with my staging experience, added to the 3D programs I love, to create amazing things. I am the one people come to and describe something and I have it done before their last word. I am the one who takes your ideas and can create an affordable 3D design to help you know what the finished project will be. I give you a chance to change things on paper before they are set in stone, literally. I show you if the color palate you desire will look good with the flooring. I show you how it will all look together, finished, before you even start. No more blueprint changes! It’s so costly to add a window! Decide now, when a few clicks can change anything or everything. Let me help your vision come to life!

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print... Read more

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print Solutions for their online growth. With the vision of Enabling Print Business on the Web it has been able to successfully create customized solutions for the printing industries. With clients in more than 40+ countries, our clients are from top 10 countries of Unites States, UK, Netherlands, Germany, Australia, Switzerland, France, Canada, Denmark, and Brazil. 80% of USA clients belong to 4 major states of California, New York, Florida, and Texas.

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to... Read more

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to produce construction and design documents. My experience pertains to producing design drawings for residential and light commercial projects, and for all phases including Conceptual Design, Schematic Design, Design Development, and Construction Documents. I maintain my title as Certified Professional Building Designer with the National Council of Building Designer Certification, Which requires at least 6 years of Drafting Experience to qualify to take the exam. Upon successfully passing the exam it then requires 8 credit hours of continuous education per year to maintain certified status.

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a... Read more

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a complex fixture, I am here to help! - Proficient in Solidworks and Creo Parametric - Full project management from start to finish - Regular communication is critical for success

AutoCAD, REVIT, SketchUp, and Photoshop enthusiast, wide experience in architectural presentations, development of construction packages, architectural design and proposal of interior spaces. One of m... Read more

AutoCAD, REVIT, SketchUp, and Photoshop enthusiast, wide experience in architectural presentations, development of construction packages, architectural design and proposal of interior spaces. One of my passions is product design, so with me you a have an all in one, well-skilled freelancer.

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing... Read more

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing 3D models, isometrics, orthographic drawing of piping systems based on the field survey, process and equipment information and technical specifications provided by the customer.

Experienced Computer Aided Design (CAD) Drafter with a demonstrated history of working in the design industry (civil, mechanical, & structural). Technology & innovation is definitely my passion.

Experienced Computer Aided Design (CAD) Drafter with a demonstrated history of working in the design industry (civil, mechanical, & structural). Technology & innovation is definitely my passion.

I am an early career Engineer with experience in CAD, looking to gain professional experience.

I am an early career Engineer with experience in CAD, looking to gain professional experience.

-CAD Designer with over twenty years of experience -Associate degree in Design Engineering -Experienced product and Industrial designer -Programs: SolidWorks, Inventor, AutoCad, Excel -3D modeling, D... Read more

-CAD Designer with over twenty years of experience -Associate degree in Design Engineering -Experienced product and Industrial designer -Programs: SolidWorks, Inventor, AutoCad, Excel -3D modeling, Designing, Layout, and manufacturing drawings

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil &amp; Gas industry, and a proven track record in 3D modeling, I am confident in my ability to... Read more

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil &amp; Gas industry, and a proven track record in 3D modeling, I am confident in my ability to contribute effectively to your team. I began my design career in 2013 and have since completed over 500 projects, ranging from robots and mechanical parts to architectural designs. My career started in graphic design, where I developed technical plans and 3D models for both architectural and engineering projects. My expertise in CAD/CAM software, including SolidWorks and AutoCAD, has been essential in ensuring the precision and visual quality of complex representations. While at Numare LDTA, I successfully delivered over 250 projects, mastering tools such as SketchUp, rendering software, and the Microsoft Office suite. Thank you for considering my application. I look forward to the opportunity to contribute to your projects. https://cults3d.com/en/users/Gaisa3D/3d-models