Hire Local CAD Designers near Sammamish, Washington

I have 5 years experience designing with Solidworks. I specialize in complex surfaces and assemblies but no job is to big or too small for me.

I have 5 years experience designing with Solidworks. I specialize in complex surfaces and assemblies but no job is to big or too small for me.

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boei... Read more

I’m Sergio Perez Fontana, an Aerospace Engineer, Manager, and Technologist with over 30 years of experience in Flight Sciences and Structures. My career spans many successful aircraft programs at Boeing, Gulfstream, Bombardier, Bell Helicopter, and Embraer, where I led cross-functional teams in driving innovations through process and design optimization. I’ve led the implementation of advanced methodologies integrating advanced aerospace and exponential technologies for aircraft and other high-performance products maximizing efficiency and effectiveness. I have also developed a deeper specialty in Generative Design and Structural Optimization. Since 2014, I’ve explored and applied topology optimization and AI-driven generative design techniques, leveraging various generative design tools to inspire better, more efficient designs. For example, I contributed to achieving significant weight reduction in thick aluminum plates used to support heavy monuments on the Boeing VC-25B New Air Force One Presidential Aircraft, achieving tangible benefits in structural performance and cost. Traditional design methods often yield heavy, costly parts with underutilized material after long design processes. Every structural component, regardless of the scale of the project or budget, can benefit from my proprietary AI-driven workflows to transform conventional designs into structures that are: - Stronger and lighter: Eliminating unnecessary mass while exceeding performance requirements. - Optimized for manufacturability: Custom-tailored for efficient, scalable production using subtractive or additive processes. - Cost-effective and ready for validation: Minimizing engineering effort and material usage while seamlessly integrating into certification and operational workflows. This approach delivers high-quality structural engineering solutions faster and at a lower cost. Whether you’re developing an advanced component for a Martian flying vehicle or a flying hydrofoil board over water, I bring deep aerospace expertise and advanced AI tools to help you overcome your design challenges.

3D design draftsman with over 40,000 hours of experience. Specializing in commercial and residential millwork, product design and conceptual planning. Strong experience using Sketch-up & Solidworks.

3D design draftsman with over 40,000 hours of experience. Specializing in commercial and residential millwork, product design and conceptual planning. Strong experience using Sketch-up & Solidworks.

I am a mechanical engineer and project manager with six years of experience leading projects from initial concepts through to execution. My greatest strengths are deriving insights from data and commu... Read more

I am a mechanical engineer and project manager with six years of experience leading projects from initial concepts through to execution. My greatest strengths are deriving insights from data and communicating with people in a way that shows understanding of their perspectives, enabling me to explain complex concepts in simple terms. I have a talent for being highly detail-oriented while always keeping the big picture in mind, ensuring that even when we're deep into a project, I stay focused on the main objectives. I am passionate about empowering others and feel most energized when I'm learning, growing, and taking charge of solving problems. Above all, I value integrity, serving others, efficiency—and having fun while doing it.

Solidworks/Fusion360/Autocad. 15 years inhouse parts production manager at Lincoln Industrial Corporation, an internationally distributed log truck/industrial trailer/dump truck mfgr., experienced in... Read more

Solidworks/Fusion360/Autocad. 15 years inhouse parts production manager at Lincoln Industrial Corporation, an internationally distributed log truck/industrial trailer/dump truck mfgr., experienced in guiding production fabrication enterprise with CAD by assessing production needs and diving into assembly models for DXFs and shop drawings to power CNC cutting, pressbrake operations, and assembly. Also frequently scratch-modeled/reverse engineered parts and assemblies from broken physical examples or customer sketches to supply jobber replacement parts and structural steel to local industrial concerns and construction companies. Earned CSWA late 2025. Currently own/operate 3Design CAD, LLC, a 3D/2D industrial design/drafting and fabrication consultation provider doing business locally in the Puget Sound area and nationally online.

I worked with SH Engineering & Mfg. for 8 years. I drafted for steel fabrication for 4 years. 2 of the 4 years were spent heading the product department which focused on piping and pipe supports and m... Read more

I worked with SH Engineering & Mfg. for 8 years. I drafted for steel fabrication for 4 years. 2 of the 4 years were spent heading the product department which focused on piping and pipe supports and misc. fabricated items. We fabricated from Steel, Stainless Steel, and Aluminum. Now I own the Delightful Neighborhood Market, a neighborhood grocery store. I miss doing design work and would like to do extra work to earn extra money to save for my children’s college.

A beginning graphic designer with an associate’s degree looking to join the graphic design industry. My goal is to use my creative talents to benefit the company and bring joy to others. I'm knowledge... Read more

A beginning graphic designer with an associate’s degree looking to join the graphic design industry. My goal is to use my creative talents to benefit the company and bring joy to others. I'm knowledgeable in using various production software such as Photoshop, Maya, Libre Office, Unity, Animate, Illustrator, Indesign, and Wavepad. I’ve had practice in 2D/3D art production software. Working in Photoshop and Maya are two of my strongest skills. I enjoy creating art pieces or other 2D designs such as a website page, advertisement, or greeting card. There are also many miscellaneous objects and props I build in Maya for fun. One of my biggest projects was to design and build a 3D environment from scratch. Throughout all these, soft skills were also put to the test. Some examples intrude problem solving, improvising, and deciding on a different approach when my original plan doesn’t work. My specialty is building objects from a game or cartoon. I enjoy building things that are related to fun and games.

SolidWorks Expertise: 5-6 years of experience. Certified SolidWorks Professional - Mechanical Design (CSWP-MD 2023). Design for Manufacturing: experienced with manufacturing processes including: Shee... Read more

SolidWorks Expertise: 5-6 years of experience. Certified SolidWorks Professional - Mechanical Design (CSWP-MD 2023). Design for Manufacturing: experienced with manufacturing processes including: Sheet Metal, CNC Milling/Turning. Mechanical Aptitude: Mechanically inclined, analytic, and detail-oriented, with a strong ability to proactively communicate with colleagues at all levels. Engineering Data Packages: Proficient in creating comprehensive data packages, including drawings, models, and Bills of Materials (BOM) for design, prototype and production releases. Results-Oriented: Highly self-motivated, able to work independently and collaboratively, delivering excellence in fast-paced environments. Product Lifecycle Management (PLM): Proficient in lifecycle data management, revisions, and documentation using PLM software

Residential design and drafting professional with more than 10 years of remodeling experience. I specialize in Chief Architect X17 and produce as-built plans, remodel layouts, kitchens and baths, cabi... Read more

Residential design and drafting professional with more than 10 years of remodeling experience. I specialize in Chief Architect X17 and produce as-built plans, remodel layouts, kitchens and baths, cabinetry plans, elevations, 3D models, and construction documentation. My construction background helps me create drawings that are practical, organized, and grounded in real-world field conditions. I work well as an extension of designers, remodelers, contractors, and design-build teams that need reliable drafting support.

My expertise comes primarily from the aircraft industrie, machined parts, where I have over 25 years experience running cnc machines, programming them, planning parts, and being part of the produce-ab... Read more

My expertise comes primarily from the aircraft industrie, machined parts, where I have over 25 years experience running cnc machines, programming them, planning parts, and being part of the produce-ability meetings. My passion is inventing and designing products. I also enjoy making 3D printed art and jewelry. https://www.shapeways.com/shops/schierdesign

-3D CAD Design -Injection Molding -Plastic Part Design -Mechanical Engineering -Product Design -Product Development -Fusion 360 -CNC Machining From 3D modeling to low volume producti... Read more

-3D CAD Design -Injection Molding -Plastic Part Design -Mechanical Engineering -Product Design -Product Development -Fusion 360 -CNC Machining From 3D modeling to low volume production, designing parts for injection molding and CNC machining, I have managed all stages of product design and development in a wealth of fields and modalities. I've saved large corporations in excess of $350,000/yr and got start-ups their first products to market.

graduated U of Colorado Boulder. B of Environmental Design LEED AP architectural and product 3d visualization, 2d CAD AutoCAD CD drawings and specialize tiny home design.

graduated U of Colorado Boulder. B of Environmental Design LEED AP architectural and product 3d visualization, 2d CAD AutoCAD CD drawings and specialize tiny home design.

● Create accurate 3d from cloud of points ● Designing mechanical mechanisms ● Designing mechanical parts Software: ■ Catia sheetmetal ■ Catia cloud of points ■ All shape and surface environments in... Read more

● Create accurate 3d from cloud of points ● Designing mechanical mechanisms ● Designing mechanical parts Software: ■ Catia sheetmetal ■ Catia cloud of points ■ All shape and surface environments in catia

Work well independently, problem-solving ability, and be a team player. Degree in Architecture and Urban Design. Restaurant Design, Residential Design, Kiosk Design, Interior Remodeling and Kitchen De... Read more

Work well independently, problem-solving ability, and be a team player. Degree in Architecture and Urban Design. Restaurant Design, Residential Design, Kiosk Design, Interior Remodeling and Kitchen Design.

I'm Kenneth Khumalo from South Africa. I have a Diploma in Electrical Engineering. I started in 2004 working as a CAD draughtsman for a number of Companies using Pro Engineer and Creo as a design tool... Read more

I'm Kenneth Khumalo from South Africa. I have a Diploma in Electrical Engineering. I started in 2004 working as a CAD draughtsman for a number of Companies using Pro Engineer and Creo as a design tool. I have worked on numerous projects for different companies where i was outsourced to.Companies including Denel Vehicle Sytems,Nimr,DRA,BHP Billiton mostly using Creo for design work or Pro Cabling for wiring. I would like to expand my knowledge gained from Military and Mining Design to opportunities I will attain in future.

My design and manufacturing experience began with the challenge of the Formula Society of Automotive Engineers (FSAE) competition in 2004. Ten engineers worked for one year to design and manufacture... Read more

My design and manufacturing experience began with the challenge of the Formula Society of Automotive Engineers (FSAE) competition in 2004. Ten engineers worked for one year to design and manufacture an open wheel race car from scratch to compete against the world's top engineering schools. The year-long project solidified my years studying aspects of engineering design, analysis, testing, and manufacturing. Since then I have taken on multiple freelance projects, helping folks take innovative ideas and create engineering models and manufacturing drawings. My greatest strength is working with clients to optimize their design to work with modern manufacturing methods. Whether it's maximizing product strength through Finite Element Analysis (FEA) or minimizing manufacturing costs, we will work together to take your idea into reality with a thoughtful and clearly communicated plan followed by professional execution.

I provide expert-level AutoCAD electrical drafting and MEP design services for contractors, architects, and engineering firms. I apply NEC code requirements to every drawing, ensuring designs are perm... Read more

I provide expert-level AutoCAD electrical drafting and MEP design services for contractors, architects, and engineering firms. I apply NEC code requirements to every drawing, ensuring designs are permit-ready and AHJ-compliant. Core Services: - Commercial Tenant Improvement (TI) Electrical Plans - Panel Schedules & Load Calculations (NEC Article 220) - Single-Line / One-Line Diagrams - EV Charger Load Studies (NEC Article 625) - Permit-Ready Drawings for Restaurants and Retail PRICING TIERS (based on project complexity): - Tier 1 Basic ($35-45/hr): Single panel schedules, simple load calcs, minor revisions - Tier 2 Standard ($55-65/hr): One-line diagrams, TI electrical layouts, small permit sets - Tier 3 Premium ($75-95/hr): Full permit drawing sets, EV load studies, multi-panel commercial projects Background: BS in Electrical Engineering, University of Washington. Located in Seattle, WA. Familiar with Washington State local code amendments. Fast turnaround. Technically precise. Clear communication at every stage.

Taught CAD, Certified Residential Inspector, Chief Architect

Taught CAD, Certified Residential Inspector, Chief Architect

I'm an engineer with a knack for analysis and design. I'm keen to solve engineering problems across industries using a broad spectrum of analytical and numerical techniques. I have over five years of... Read more

I'm an engineer with a knack for analysis and design. I'm keen to solve engineering problems across industries using a broad spectrum of analytical and numerical techniques. I have over five years of experience designing and analyzing new products using SolidWorks.

Experienced in most flavors of PCB Design (Digital, RF, Power...) Current and most experienced on Cadence Allegro and have a number of designs under my belt with Altium as well. Extensive experienc... Read more

Experienced in most flavors of PCB Design (Digital, RF, Power...) Current and most experienced on Cadence Allegro and have a number of designs under my belt with Altium as well. Extensive experience in transitioning designs into manufacturing. Vendor selection, qualification and factory bring-up.

Material Science / Mechanical Engineer with a demonstrated history of working in the automotive and manufacturing industry. Skilled in CAD design and simulation, supply chain management, systems engin... Read more

Material Science / Mechanical Engineer with a demonstrated history of working in the automotive and manufacturing industry. Skilled in CAD design and simulation, supply chain management, systems engineering, metal fabrication, and CNC operation. These skills allow me to design in a way that takes all aspects of product development into consideration. Strong operations professional with a Bachelor’s Degree focused in Material Science Engineering from Washington State University.

I am passionate about the work I do and put every skill set I have to work when I take on a new project. What drives me most is new challenges, and I am ready, willing and able to tackle yours.

I am passionate about the work I do and put every skill set I have to work when I take on a new project. What drives me most is new challenges, and I am ready, willing and able to tackle yours.

Passionate 3D CAD designer with experience in product development and marine and boat design. I have worked on projects for the United States Navy, United States Army and local and state governments.... Read more

Passionate 3D CAD designer with experience in product development and marine and boat design. I have worked on projects for the United States Navy, United States Army and local and state governments. I have been tasked with improving designs for manufacturing, product life cycle management and maintenance. I also have some skills as a CNC programmer for 2.5 Axis mills and routers.

I am good at meeting deadlines. I am reliable. I am easy to work with and I work well in teams. I am very self motivated. I have worked on Designs for Commercial and Residential projects. I have... Read more

I am good at meeting deadlines. I am reliable. I am easy to work with and I work well in teams. I am very self motivated. I have worked on Designs for Commercial and Residential projects. I have Project Management experience in Architectural Design.

Spencer Atelier is defined by quiet clarity, natural material expression, and a deep sensitivity to place. Drawing from the timeless language of rustic cabins and modern farmhouses, each design balanc... Read more

Spencer Atelier is defined by quiet clarity, natural material expression, and a deep sensitivity to place. Drawing from the timeless language of rustic cabins and modern farmhouses, each design balances warmth with restraint, allowing proportion, light, and texture to lead rather than ornament. Spaces are composed to feel calm, grounded, and enduring—where craftsmanship is visible, details are purposeful, and architecture supports the rhythms of everyday living. The result is a body of work that feels both familiar and refined, shaped by intention and built to age with grace.

I am a Jewelry CAD Designer and 3D Artist with over 13 years of experience creating production-ready jewelry models. I specialize in Rhino, Gemvision Matrix, and ZBrush, with additional experience in... Read more

I am a Jewelry CAD Designer and 3D Artist with over 13 years of experience creating production-ready jewelry models. I specialize in Rhino, Gemvision Matrix, and ZBrush, with additional experience in KeyShot, V-Ray, Magics, SLA and FDM 3D printing. I create accurate 3DM and STL files for manufacturing, including rings, pendants, earrings, bracelets, and custom jewelry designs. I can also provide high-quality renders when needed. My focus is clean geometry, manufacturability, accuracy, and reliable turnaround.

I'm a student looking to put my skills into use. My major is in Product Design. I've worked extensively with 3D modeling software. Primarily Fusion 360 and SolidWorks. I've also worked with KeyShot re... Read more

I'm a student looking to put my skills into use. My major is in Product Design. I've worked extensively with 3D modeling software. Primarily Fusion 360 and SolidWorks. I've also worked with KeyShot rendering a fair amount. As an amateur, I have also dabbled in some architectural works. I've used Sketchup and LivehHome3D.