Hire CAD designers & engineers in Pelham, Alabama

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundre... Read more

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundreds of sub assemblies and ranging in price for a few dollars to $1M. Additionally, I am well versed in producing photo realistic renderings of products for marketing purposes. I pride myself in providing thorough and accurate deliverables by taking the time to fully understand the challenges my clients face and how to provide the best solution possible.

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufact... Read more

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufacturing companies without a single rejection from the USPTO. All of my work is done in 3D using Solid works. I also do freelance product development work for individual inventors and manufacturing companies.

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experien... Read more

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experience modeling executive furniture for a very well known designer on the Pacific Coast, I have become exceptionally proficient at 3D modelling from minimally detailed hand drawn illustrations. I posses a mixture of artistic creativity and knowledge of form and definition makes me the perfect candidate for the development of your 3D Product Concepts. I excel at lighting and rendering at the photo-realistic level and with an additional 10 years of graphic design experience in magazine, business card, print and promotional layout, I can give your ideas the kind of edge and presentation that will draw the eye of even the most discerning and prudent of investors. I have direct connections for rapid prototyping and injection molding through cadmodels.com, I am one of the 10 elite designers featured on the website. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒, you can email me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or reach me at 541 778 0413

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years exp... Read more

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years experience in multimedia graphic design, with a Bachelor's degree. My experience allows me to have a quick turnaround and the highest quality for all my clients. I produce work in Print, Video, 3D Modeling and Animation, 2D animation, Presentations (PowerPoint and PDF), Web and other mediums. Online Portfolio: https://www.behance.net/wsfuller Walter Fuller

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimiza... Read more

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimization and thoroughness.

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet... Read more

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet metal components and assemblies for the Work Truck industry. Currently, I am employed through a military contractor that develops SATCOM systems for various branches of the U.S. Military.

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involv... Read more

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involve and use in my life beyond hobby level. I have used this to create simple mounts for my GoPro, a couple electronics enclosures, and a more complex structure like a servo controlled robotic arm that I am currently working on and my CNC machine that was mostly 3D printed. I am currently preparing to take a test to earn the CSWA (Certified Solidworks Associate) and after completing this I plan on taking the CSWP (Certified Solidworks Professional) as well.

AL Registered Interior Designer with 19 years experience 12 years experience in Kitchen/Bath/Millwork Design Experienced Space Planner Detail Oriented Create shop drawings for millwork contractors bas... Read more

AL Registered Interior Designer with 19 years experience 12 years experience in Kitchen/Bath/Millwork Design Experienced Space Planner Detail Oriented Create shop drawings for millwork contractors based on architectural drawings, including floorplans, elevations, sections, and details.

I am a graduate from the University of Texas at Austin in 2014. I studied Graphic & Industrial Design in the School of Fine Arts. Completed AutoCAD Certification at the New York Institute of Art & Des... Read more

I am a graduate from the University of Texas at Austin in 2014. I studied Graphic & Industrial Design in the School of Fine Arts. Completed AutoCAD Certification at the New York Institute of Art & Design.

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manuf... Read more

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manufacturers.

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set.... Read more

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set. Advised design teams on application of GD&T for assembly level and component level drawings and interactions. Facilitated communication between the design teams, manufacturing vendors, and the project leader. Examined fits for complex assemblies and created tolerance analyses to prove assemblies would function in all material conditions. Checked drawings for accuracy. Lead discussions on Design for Manufacturing and Design for Assembly best practices. Advised engineering team on proper application of GD&T in both ASME and ISO standards.

I am a 3d designer with a background in scuplture. I have worked extensively with cncs, 3d printers, and later cutters. I have also worked professionally in architectural manufacturering for 3 years.... Read more

I am a 3d designer with a background in scuplture. I have worked extensively with cncs, 3d printers, and later cutters. I have also worked professionally in architectural manufacturering for 3 years. I'm excited to be able to work on and assist with your projects!

I graduated in 2014 with a Bachelor's degree in Mechanical Engineering and am currently pursuing a MS/PhD degrees in Aerospace Engineering from the University of Alabama in Huntsville. I have been... Read more

I graduated in 2014 with a Bachelor's degree in Mechanical Engineering and am currently pursuing a MS/PhD degrees in Aerospace Engineering from the University of Alabama in Huntsville. I have been working with 3D CAD designs, MATLAB simulations, and Excel since my Freshmen year in college (5 years ago).

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always lo... Read more

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always looking for a new challenge.

I am currently employed as a full-time Drafter at an Architectural company but I am seeking part-time work to help expand experience and to make extra money on the side. I received my Computerized Ass... Read more

I am currently employed as a full-time Drafter at an Architectural company but I am seeking part-time work to help expand experience and to make extra money on the side. I received my Computerized Assisted Drafting Certificate through Buckeye Career Center, and then continued on with my career as an employed drafter for about 3 years and counting. Since my projects belong to the companies that I work with, I am not able to attach any work samples to my profile or proposals, but I would love to discuss the different type of projects I have worked on (including Amazon distribution centers, LAX airport expansion, Union Hospital, and other projects in many locations from Santa Monica, to New York City.). Aside from the experience I have, I am very dedicated worker and will strive to understand any necessary skills to complete the job correctly and efficiently.

After working in private industry for 5 years I have decided to start a business offering personal services in mechanical engineering and product design. My goal on this website is to provide exce... Read more

After working in private industry for 5 years I have decided to start a business offering personal services in mechanical engineering and product design. My goal on this website is to provide excellent work at the lowest rate in order to build a portfolio I can use because industry doesn't just let you out the door with all your work, haha :) I am happy to help with any engineering needs. Thank you for your time and I hope we talk soon.

CAD/CAM Student working in the field as a entry level programmer and engineering assistant.

CAD/CAM Student working in the field as a entry level programmer and engineering assistant.

I have worked in the Oil & Gas industry for 11 years. Main are of expertise is Structural Design and 3d conceptual models. I work in AutoCAD 2d/3d. I am knowledgeable in residential design,civil engin... Read more

I have worked in the Oil & Gas industry for 11 years. Main are of expertise is Structural Design and 3d conceptual models. I work in AutoCAD 2d/3d. I am knowledgeable in residential design,civil engineering and surveying as well. I enjoy helping get the job done and clients satisfied.

My name is Carlton Jacops. I am a self-motivated drafter/designer with over 5 years of experience using AutoCAD. My love for my work always shows in every project that I complete and I take tremendous... Read more

My name is Carlton Jacops. I am a self-motivated drafter/designer with over 5 years of experience using AutoCAD. My love for my work always shows in every project that I complete and I take tremendous pride in everything that I do.

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-o... Read more

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-of-Autoclave (VARTM, Vacuum Only) car frames to autoclave cured aerospace structures. I have extensive experience in thermal analysis of brake systems, autoclaves, ovens, and tooling.

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and redu... Read more

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and reducing the need for physical prototypes. 2. **Creative Flexibility** – 3D tools allow for easy experimentation and adjustments, offering unlimited creative freedom to modify and optimize designs quickly. 3. **Increased Efficiency** – 3D software speeds up the design process by allowing real-time adjustments and error detection, reducing production costs and minimizing rework.

Architectural design for me begins on a opportune blank page. It pinnacles when the designed and built environments meet. This design process includes teamwork with the client and fellow designers. Ea... Read more

Architectural design for me begins on a opportune blank page. It pinnacles when the designed and built environments meet. This design process includes teamwork with the client and fellow designers. Each relationship during this process requires empathy, perception, adaptation, and a personable environment from start to finish.