Hire CAD designers & engineers in Monteview, Idaho

Make complicated multipart assembles Add animations Make designs complaint with 3d printing in mind for easy printing

Make complicated multipart assembles Add animations Make designs complaint with 3d printing in mind for easy printing

Mr Stenger has over 30 years experience within the outdoor sporting goods Industry, over 15 years of mechanical design and engineering for manufacturing. Martin has the skills and ability to make prot... Read more

Mr Stenger has over 30 years experience within the outdoor sporting goods Industry, over 15 years of mechanical design and engineering for manufacturing. Martin has the skills and ability to make prototypes of the designs hence has a good understanding of intelligent design and design for for manufacturing. Steady Solidworks user since 2003. Successful product offerings in current market.

Expertise in piping systems, including layout, fabrication, and installation. Skilled in steel fabrication & industrial design, from detailed welding to structural assembly. Extensive experience with... Read more

Expertise in piping systems, including layout, fabrication, and installation. Skilled in steel fabrication & industrial design, from detailed welding to structural assembly. Extensive experience with skid-mounted equipment, ensuring seamless integration and functionality. Knowledge of industry standards, safety protocols, and quality assurance measures. Ability to work with both large-scale and small custom projects, adapting to unique client needs. See www.merrittds.com for more info.

I'm a mechanical engineering student at the University of Idaho looking to brush up on my Solidworks skills. Give me a shot!

I'm a mechanical engineering student at the University of Idaho looking to brush up on my Solidworks skills. Give me a shot!

Technical College Student in my second year of Small Craft Naval Architecture upon completing the Elements of Technical Boat Design COC program. Subject matter studied has been Hydrostatics, Principle... Read more

Technical College Student in my second year of Small Craft Naval Architecture upon completing the Elements of Technical Boat Design COC program. Subject matter studied has been Hydrostatics, Principles of Resistance, Stability I&II, Hull Lines Drawing, FRP I&II, Interior Design. Drafting skills with Rhino 5.0, and Manual.

I am a teenager who has done CAD design for a while now. I love doing it, and it has shown me my probable career for College.

I am a teenager who has done CAD design for a while now. I love doing it, and it has shown me my probable career for College.

I am detail oriented and always learning. I have my associates in Drafting Design Technology and I have worked with all kinds of different software and projects

I am detail oriented and always learning. I have my associates in Drafting Design Technology and I have worked with all kinds of different software and projects

I am an Electrical Engineer and CAD Designer with 9+ years of experience producing construction-ready electrical drawings for industrial and high-tech facilities. I specialize in AutoCAD and Revit dra... Read more

I am an Electrical Engineer and CAD Designer with 9+ years of experience producing construction-ready electrical drawings for industrial and high-tech facilities. I specialize in AutoCAD and Revit drafting, electrical power distribution layouts, feeder and branch circuit design, panel schedules, conduit and cable tray routing, and single-line diagrams. My background includes work in semiconductor manufacturing environments with strict safety and quality standards. I am highly experienced in NEC and NFPA 70E compliance, coordination with mechanical and structural trades, and translating engineering requirements into clear, accurate CAD deliverables. I am reliable, detail-oriented, and responsive, and I take pride in delivering drawings that contractors can build from without confusion or rework.

I am an experienced drafter and designer with autocad and solidworks. I work full time for a utility designing substation protection and control systems. I am mechanical, electrical and civil talented... Read more

I am an experienced drafter and designer with autocad and solidworks. I work full time for a utility designing substation protection and control systems. I am mechanical, electrical and civil talented with great attention to detail. Also in my spare time I design and built off road parts for my vehicles.

Experienced HVAC designer with 7+ years of industry experience. Experience as a drafter, designer, EIT, and PE.

Experienced HVAC designer with 7+ years of industry experience. Experience as a drafter, designer, EIT, and PE.

I have over 6 years experience creating 3D models and 2D drawings using the latest CAD/CAM software. I am experienced in converting 2D legacy blueprints into 3D models, design of tooling for the aeros... Read more

I have over 6 years experience creating 3D models and 2D drawings using the latest CAD/CAM software. I am experienced in converting 2D legacy blueprints into 3D models, design of tooling for the aerospace industry, mold design for injection molding biomedical industry, design of one off prototypes for R&D, and new product development.

I have a background in Mechanical and Manufacturing Engineering with a passion for Computer Aided Design, Product Design, Innovation, and Education. I am looking for opportunities to transform your i... Read more

I have a background in Mechanical and Manufacturing Engineering with a passion for Computer Aided Design, Product Design, Innovation, and Education. I am looking for opportunities to transform your idea concepts into reality! From simply bringing an idea to life, to optimizing an existing product, and everything in between, I personally guarantee each and every one of my customers will be satisfied with the work they receive from me. I take great pride in my work and hold myself to the highest standard of quality. Based on your needs, you may choose from a number of the following services: • Concept Development • 3D Modeling & Rendering • Mechanical Analysis (FEA) • Drawings & Documentation • Revise/Update old CAD files to 3D SolidWorks models and drawings-All jobs considered

HI my name is Brandon. I run a small CAD firm based in Dayton Ohio. I have an AAS in drafting and design and I Graduated with honers. Most of my experience is in floor plans. I do a lot for Domino's P... Read more

HI my name is Brandon. I run a small CAD firm based in Dayton Ohio. I have an AAS in drafting and design and I Graduated with honers. Most of my experience is in floor plans. I do a lot for Domino's Pizza. I have redesigned over 40 stores for 8 different franchise owners in 5 different states. I pride my self in being able to problem solve very easily. I do this full time and take what I do very seriously.

I have been working as a Civil Designer/Drafter for 23 years. I’m a Civil CAD Lead of several Civil engineering projects, including levee projects, canal and drainage projects, roadway projects, flood... Read more

I have been working as a Civil Designer/Drafter for 23 years. I’m a Civil CAD Lead of several Civil engineering projects, including levee projects, canal and drainage projects, roadway projects, floodwall and cutoff wall projects, and site development projects. As a Civil Designer I produced a lot of CAD drawings from planning to construction phases, which included preparation of site layout, construction phasing plan, demolition plan, utility plan and profile, road plan and profile, levee plan and profile, flood wall and cutoff wall plan and profile, grading and drainage plan, erosion control plan, and civil details. For Architectural, Electrical, Mechanical and Structural disciplines, I can do 2D drafting work. Software I used include AutoCAD, Civil 3D, AutoCAD MEP, Revit, Microstation, and Inroads.

I am a recently graduated mechanical engineer. During my college career I have tutored and advised on CAD and all of my internships utilized my CAD skills heavily.

I am a recently graduated mechanical engineer. During my college career I have tutored and advised on CAD and all of my internships utilized my CAD skills heavily.

Make complicated multipart assembles Add animations Make designs complaint with 3d printing in mind for easy printing

Make complicated multipart assembles Add animations Make designs complaint with 3d printing in mind for easy printing

I have many years experience working with AutoCAD and Revit. With degrees in Civil Engineering and Residential design drafting, I am able to work on many different type of projects. Floorplans are my... Read more

I have many years experience working with AutoCAD and Revit. With degrees in Civil Engineering and Residential design drafting, I am able to work on many different type of projects. Floorplans are my specialty, but I am willing to take on civil, architectural and basic electrical plans as well.

I loved Legos and erector sets since I was a young child which helped instill a passion for design. At the age of 17, I went to Fukuoka Japan as a foreign exchange student. After graduating high schoo... Read more

I loved Legos and erector sets since I was a young child which helped instill a passion for design. At the age of 17, I went to Fukuoka Japan as a foreign exchange student. After graduating high school, I joined the United States Air Force specializing in Explosive Ordnance Disposal which falls under the domain Civil Engineering and I obtained an associates degree based on my position. After completing six years of service to the Air Force, I followed my passion for helping people into the field of nursing where I obtained a bachelors degree from the University of Nevada Reno (UNR). While at UNR, I spent many hours in the engineering building honing my CAD skills and furthered my skills by acquiring a student license to practice with at home until I decided I was good enough to buy a commercial product license. During my time in nursing, I focused my time in the ICU, Neuro-Surgery, and Telemetry floors with minor assignments in the ED and Surgical suites. At present, I am looking for opportunities to become involved in product design using my commercial license for solidworks. I am willing to accept any challenge that comes my way.

I am a highly experienced manufacturing and design engineer with over a decade of expertise in mechanical design and leadership across diverse manufacturing environments. Skilled in optimizing product... Read more

I am a highly experienced manufacturing and design engineer with over a decade of expertise in mechanical design and leadership across diverse manufacturing environments. Skilled in optimizing production processes through advanced engineering techniques and strategic implementation of ERP/MRP systems. Proficient in a wide range of technical tools and software, including SolidWorks, SW-PDM, HSM Works, Fusion, Inventor, and Calypso.

Grew up on a farm. Fabrication, welding, woodworking and other skills needed to survive. If you need something designed, I hope to be of assistance.

Grew up on a farm. Fabrication, welding, woodworking and other skills needed to survive. If you need something designed, I hope to be of assistance.

33 years experience designing, programming for cnc 4-5 axis, mill turn, 2d, 3d any part you want using up to date Mastercam products.

33 years experience designing, programming for cnc 4-5 axis, mill turn, 2d, 3d any part you want using up to date Mastercam products.

Mechanical Engineer specializing in the use of AutoCAD and SolidWorks to manage the engineering design process. Experience using, configuring, and testing customized automation and data extraction sof... Read more

Mechanical Engineer specializing in the use of AutoCAD and SolidWorks to manage the engineering design process. Experience using, configuring, and testing customized automation and data extraction software in manufacturing environments. Possessing over 10 years of knowledge with change management standards, concepts, and procedures.

I am extremely skilled in 2D designs and 2D isometric views that give the 3D feel. Having a AA in CAD Drafting and a BA in Project Management, I have used my skillsets to work for architects, cabinet... Read more

I am extremely skilled in 2D designs and 2D isometric views that give the 3D feel. Having a AA in CAD Drafting and a BA in Project Management, I have used my skillsets to work for architects, cabinet companies, and restaurant design companies. I am very knowledgeable in the restaurant space having worked on large food courts, hotels, schools, retirement homes, bars and restaurants.

6 years experience in PCB layout and drafting. Technical school graduate. Looking for projects in pcb drafting for professional portfolio development.

6 years experience in PCB layout and drafting. Technical school graduate. Looking for projects in pcb drafting for professional portfolio development.