Hire CAD designers & engineers in Marietta, Georgia

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to... Read more

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to serve the BOM and the brand.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

Have experience in Manufacturing Drafting through High-School Program, College Program, SkillsUSA Competitions, and Personal Work. Have a full-time job, so this is more of a platform used for extra ex... Read more

Have experience in Manufacturing Drafting through High-School Program, College Program, SkillsUSA Competitions, and Personal Work. Have a full-time job, so this is more of a platform used for extra experience and a little side money. I promise to get projects done in a timely manner, but same day deliverance may not be an option. I appreciate your time and hope we can build a good work relation.

INCREDIBLE KNOWLEDGABLE RESOURCEFUL person in many technological fields worked for GE Edison Tech center in Schenectady NY

INCREDIBLE KNOWLEDGABLE RESOURCEFUL person in many technological fields worked for GE Edison Tech center in Schenectady NY

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

I am an experienced CAD Designer with over 20 years experience in Residential, Commercial and Retail projects. I have worked for several National and Regional home builders both as direct hire and fre... Read more

I am an experienced CAD Designer with over 20 years experience in Residential, Commercial and Retail projects. I have worked for several National and Regional home builders both as direct hire and freelance. I have contributed to teams as well as individual projects that range from initial concepts & Illustrations to complete construction documents and documentation photography. Projects that are unique and require knowledge of the entire lifecycle of the project are those I enjoy best.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

Long time designer and analyst. Focus on Design for Manufacture for Automotive, Aerospace, and Medical Industries. Forging process design, Die making and hard milling, jig and fixture design, and 'o... Read more

Long time designer and analyst. Focus on Design for Manufacture for Automotive, Aerospace, and Medical Industries. Forging process design, Die making and hard milling, jig and fixture design, and 'one-off' prototype hog out machining.

I am a results-driven Mechanical Engineer with a BS in Mechanical Engineering Technology and over 25 years of progressive experience across mechanical design, manufacturing engineering, quality, and n... Read more

I am a results-driven Mechanical Engineer with a BS in Mechanical Engineering Technology and over 25 years of progressive experience across mechanical design, manufacturing engineering, quality, and new product development. My career spans the aerospace and automotive industries, where I have contributed to high-performance programs involving aerospace composites, antenna systems for aeronautical and space applications, aircraft fuel bladders, and automotive heat shields. I specialize in taking concepts from design through to production. My technical strengths include advanced CAD design, Tool Design, GD&T, FEA, Six Sigma methodologies, Process Mapping, PFMEA, Control Plans, 8D/8M problem solving, and KUKA robotics programming. I excel at developing robust manufacturing processes, optimizing designs for manufacturability, and solving complex engineering challenges under tight tolerances and demanding quality standards. On CADCrowd, I offer reliable, high-quality CAD modeling, detailed engineering drawings, tooling design, and technical support for aerospace, automotive, and general mechanical projects. Whether you need precision 3D models, GD&T-compliant drawings, design for manufacturing input, or FEA-ready geometry, I deliver accurate, production-ready deliverables on time. I’m passionate about engineering excellence and look forward to helping your team bring complex designs to life.

Excellent organization skills, strong communication skills, both verbal and written, knowledgeable in AutoCad, creative and progressive thinker, and efficient at analyzing information. Certifications... Read more

Excellent organization skills, strong communication skills, both verbal and written, knowledgeable in AutoCad, creative and progressive thinker, and efficient at analyzing information. Certifications: - Certification of Completion - ACE Electric Summer Internship Program. - Certificate of Completion - AutoCad Certification Training. - Autodesk Certified User - AutoCad 2025

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and ha... Read more

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and have worked with manufacturers that make our parts. Autodesk inventor I have been using since a freshman in high school. I enjoy using it as hobby for 3D modeling and 3D printing. I end up making drawings for fun. This is the program I use at home and will be using. I have also used Revit in school when I took a civil engineering and architecture class. I am a mechanical engineering student.

I am currently finishing up my CAD/CAM/CNC program and am eager to help you with your projects. While still new to this particular field; I have diverse work experience (sales, warranty, and produ... Read more

I am currently finishing up my CAD/CAM/CNC program and am eager to help you with your projects. While still new to this particular field; I have diverse work experience (sales, warranty, and production), creativity in problem solving, good eye for aesthetics, and boundless work ethic. I look forward to working with you!

Good at prototyping with quick initial designs. I have 4 years of experience in medical device industry. Graduated with a bachelor's in Biomed engineering from Memphis.

Good at prototyping with quick initial designs. I have 4 years of experience in medical device industry. Graduated with a bachelor's in Biomed engineering from Memphis.

Design engineer that focuses on custom designs ranging from small functional parts up to large metal structures. Work with a machine shop and fully understand the manufacturing processes as well as de... Read more

Design engineer that focuses on custom designs ranging from small functional parts up to large metal structures. Work with a machine shop and fully understand the manufacturing processes as well as designing for real world builds.

Hi! I have spent the last few years striving to attain the most diverse skill set available to me in my studies at Georgia Tech. Consequently, I can offer a unique, holistic perspective and approach w... Read more

Hi! I have spent the last few years striving to attain the most diverse skill set available to me in my studies at Georgia Tech. Consequently, I can offer a unique, holistic perspective and approach when confronting a design problem. I have participated in a wide variety of projects across several disciplines including optics, control systems, computer vision, aerospace engineering, and much more. I am extremely excited whenever I am confronted with a new problem and enjoy immersing myself into new areas of practice. I look forward to working with you!

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machin... Read more

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machine design for commercial and military applications.