Hire Local CAD Designers near Los Gatos, California

Mechanical Design Engineer with 20 years experience in consumer products, low cost high volume manufacturing

Mechanical Design Engineer with 20 years experience in consumer products, low cost high volume manufacturing

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I ca... Read more

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I can deliver fast turnaround and clean, professional results.

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product... Read more

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product engineering, from feasibility analysis and cost estimation to prototyping and production. Notable achievements include designing a self-balancing three-wheel vehicle, engineering the Will.I.AMG for the 2022 Miami F1, and developing the Nikola One hydrogen-electric Class-8 truck. Markus has a proven ability to lead projects from concept to completion, leveraging skills in CAD design, kinematic layout, and advanced manufacturing techniques. He has successfully collaborated with global stakeholders and managed teams across diverse projects, including the development of the Fisker Karma Sunset retractable hard top, Aptera’s mass-production-ready body redesign, and the high-performance LaMarc hypercar. Fluent in German, Markus also brings extensive experience working with renowned brands like BMW, Audi, and Fisker Automotive. He holds a Mechanical Engineering degree and excels in program management, problem-solving, and efficient manufacturing practices. Whether leading large teams or contributing as a hands-on innovator, Markus consistently delivers cutting-edge engineering solutions that align with business goals and customer expectations.

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my car... Read more

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my career, I have worked on a variety of projects, including my Final Year Project where I successfully designed and implemented a solar-powered thermoelectric refrigeration system. In addition to my academic achievements, I have honed my skills by working on various CAD design projects. My expertise lies in producing accurate, detailed models while adhering to engineering standards and ensuring functionality in real-world applications. I am passionate about innovative design and take pride in my ability to transform ideas into practical solutions.

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness co... Read more

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness compliance, technical documentation, and regulatory processes. Seeking opportunities in aircraft component design and certification.

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying ar... Read more

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying architecture at the University of Notre Dame, which eventually led me to work in the film industry as a set designer and model maker. My main areas of expertise are in 3D modeling, sculpting, and rendering as well as architectural drafting, design, and construction documentation.

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex... Read more

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex assemblies for product manufacturing and machine builds. Adept in maximizing form, fit and function through meticulous design model evaluation. Process Plant Designer As the Solidworks PDM Administrator and Drafter my responsibilities include maintaining PDM vault and revision control, managing mechanical BOM's, provide accurate and detailed manufacturing drawings, design process equipment layout using AutoCAD and Solidworks, Prepare Assembly Retrofit Document Guides and Build Packages and (P&ID) Process & Instrumentation Diagrams using AutoCAD • Design detailed assemblies and subassemblies of Process Piping Systems using Solidworks • Design Process Equipment Layout using AutoCAD and Solidworks • Create custom parts and pressure vessel manufacturing drawings. • Prepare Assembly, Retrofit Document Guides and Build Packages. • (P&ID) Process & Instrumentation Diagrams using AutoCAD • Solidworks PDM Vault and Bill of Material management Lead Jewelry Designer Oversee a design team of three. I was the go-to expert for evaluating product designs, parts, assemblies, drawings, dimensioning and tolerancing. I would set the creative direction for product lines and insure manufacturability. R&D of micro precision watch mechanisms and components. Design intricate high-end custom jewelry, bridal and watch lines. • Design machines, fixtures, tooling and molds for jewelry and watch production. • Reverse engineering of Swiss made micro precision mechanical watch movements Detail design of all internal and external wrist watch parts and components. • Implement equation driven design tables to existing and new Solidworks files for an efficient and automated design process.

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc.,... Read more

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc., maker of the Mac OS Pixels 3D suite of modeling, animation and rendering tools. Pixels also created the Tempest Renderer which used Total impact G4 multi-chip cards (up to 52 processors in a box about the size of a PC tower). While at Pixels, I worked with companies like Digital Domain, Industrial Light and Magic, and Apple Inc. (The software was a Mac only suite). I was also responsible for building software plugin installers and helping national and international customers with sales, installations, and general trouble shooting of both technical and creative natures. During that time, I also attended and graduated from the Art Institute of California with an Associate of Science in 3D, holding the distinction of receiving the "Best Portfolio" award for the class of 2001. Over the years, I have provided videography, editing, motion graphics, animation, 3D Product design, and design for 3D printing as a contract artist for many L.A. and Denver based post production facilities and other companies needing my skills.

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Mode... Read more

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Modeling, and Architectural Visualizations. Currently working at Tesla.

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentrati... Read more

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentration in Mechanical Systems at California Baptist University. Outside of school, I am heavily involved in the collegiate design competition Formula SAE where I lead a team of six engineering students in designing, fabricating, and validating the chassis and ergonomic systems of Cal Baptist Racings' sixth competing internal combustion racecar. In the past, I have worked in a variety of roles in multiple fields, including electrical, warehouse, and student life, where I have gained experience in teamwork and the execution of engineering solutions. My plan for the future is to continue gaining engineering experience through Formula SAE, summer internships, and scholastic projects.

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in... Read more

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in Mechanical Engineering, Writing Minor

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and h... Read more

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and has more than 100 experienced staffs, of which more than 30 with 20 years of experience in plastic engineering and die-casting. To meet customers' higher requirements for product quality and greater demand for mould manufacturing, we constantly introduce advanced equipment, technology and talents at home and abroad to enhance our production means and technical support, constantly expand processing area to increase our production capacity. At present, Gud Mould has a large number of international advanced CNC machining centers, EDM, WEDM, milling machines, tool grinders and other precision die and mould processing equipment; imported spectrometers, metallographic analyzers, water capacity detectors, coordinate detectors, gauges and other international advanced detection equipment and instruments. Gud Mould's die design and production all realize computerization, apply International advanced AutoCAD, Pro/E, UG, Cimatron, MASTERCAM, etc. File of IGS, DXF, STP, PORASLD and so on are acceptable here. After receiving drawings and data from customers, engineers of Gud Mould design and program first. Manufacture, produce and inspect them strictly according to drawings of mould engineering. All manufacturing processes realize digitalization of drawings, so as to ensure stability of high precision and high quality of dies. All materials of die are made of high quality steel and precision standard die base, which ensures service performance and life of die. In line with principle of customer first, we provide the best quality, delivery date, quality service and reasonable price, absolutely guarantee interests of customers, and provide confidentiality commitment to all technical information of customers. Gud Mould Industry Co., Ltd. has always adhered to business philosophy of "people-oriented, quality first", and has been making progress and developing steadily. Although Gud Mould is medium-sized, it has been recognized by well-known domestic enterprises such as Chang'an, Changfei, Hafei, Lifan, Ford in China, and has established a good reputation among domestic customers. In 2018, we set up overseas department, which mainly develops overseas markets. We sincerely welcome you to visit our company and expand your business!

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and constructio... Read more

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and construction drawing preparation.

Greetings! I'm Todor, 3D artist with over 15 years of experience in the architectural field. I'm here to turn your visions into stunning 3D realities. I specialize in transforming ideas into visual m... Read more

Greetings! I'm Todor, 3D artist with over 15 years of experience in the architectural field. I'm here to turn your visions into stunning 3D realities. I specialize in transforming ideas into visual masterpieces using tools like 3D Studio Max, Corona Render, V-Ray, Substance Designer, and a range of scripts and plugins. With these, I can create lifelike 3D renderings and immersive architectural experiences. Let's connect and turn your ideas into 3D art

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several glo... Read more

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several global brands. He founded FILE2FAB, a Los Angeles–based design engineering firm that creates production-ready solutions. The firm delivers practical, end-to-end support from concept and CAD development through prototyping and manufacturing. FILE2FAB serves clients in Aerospace, Medical Devices, Footwear, Apparel, and precision fabrication, providing: • Industrial and mechanical design • CAD modeling, 3D scanning, reverse engineering, and digital fabrication • Design for manufacturing (DFM) and design for assembly (DFA) • Prototyping and material testing Paul combines production expertise and design discipline to create products that are visually refined, technically sound, and commercially viable. His recent work includes fully reverse engineering and redesigning the Golden Globe Award for the Hollywood Foreign Press Association.

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron i... Read more

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron is able to develop elegant solutions to any problems laid at his feet. Aaron is currently a staff designer at Teveri LLC, where he has created numerous biometric wearables based on a liquid-metal technology that he also played a key role in developing.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

MECHANICAL DESIGN Not all companies offering 3D CAD design services are equal. At Bend Engineering, we bring nearly 15 years of experience in product design to the table. Our customers have come to... Read more

MECHANICAL DESIGN Not all companies offering 3D CAD design services are equal. At Bend Engineering, we bring nearly 15 years of experience in product design to the table. Our customers have come to trust us to provide state of the art design services that are focused squarely upon their product design and development needs. Our ability to focus on bringing our customers’ concepts to the marketplace in a short amount of time begins with the use of leading edge Solidworks 3D and Fusion 360 solid modeling design software. Whether you need a design for manufacturability or are interested in concurrent design and development services, we are here to help your business succeed. 3D CAD Design Services include: • 3D solid modeling design – a complete product designing package. • 2D detailed drawings, plots, pictorial plots and technical illustrations – for instruction manuals and sales literature. • NEW conceptual drawings – starting from scratch, customer sketches, or other materials • Fully detailed parts and assembly drawings – suitable for quoting, costing, product promotion, and production of required manufacturing tooling. • Reverse engineering design services – we can transform your existing 2D parts and assemblies into fully 3D solid CAD models.

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic... Read more

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic environments, I stay focused on delivering solutions that exceed expectations. Let's drive success together.

I'm a mechanical engineer with 2.5 years of experience in the construction design industry, focused on HVAC system design and documentation. I’ve worked extensively with AutoCAD, Revit, SolidWorks, an... Read more

I'm a mechanical engineer with 2.5 years of experience in the construction design industry, focused on HVAC system design and documentation. I’ve worked extensively with AutoCAD, Revit, SolidWorks, and Fusion 360 — but for freelance projects on CadCrowd, I’ll be offering my services exclusively in Fusion 360. My strengths lie in 3D modeling, design documentation, and producing clean, accurate CAD files. I bring an engineering mindset to all my work, with a strong understanding of real-world manufacturing and design constraints. I also have a background in FEA using SolidWorks and plan to expand into offering simulation services in the future as I continue retraining. If you need Fusion 360 modeling support — whether it’s for parts, assemblies, or drawing packages — I’d love to collaborate and help move your project forward with precision.