Hire Local CAD Designers near Leander, Texas

-Bachelor's degree at architecture -worked as interior designer for 2 years -worked with some offices at the middle east on many residential and industrial project

-Bachelor's degree at architecture -worked as interior designer for 2 years -worked with some offices at the middle east on many residential and industrial project

As an experienced goldsmith and 3D jewelry designer, I offer my expertise to bring your jewelry visions to life. Thanks to my training as a goldsmith and my studies in design and jewelry, I have compr... Read more

As an experienced goldsmith and 3D jewelry designer, I offer my expertise to bring your jewelry visions to life. Thanks to my training as a goldsmith and my studies in design and jewelry, I have comprehensive experience designing complex jewelry pieces, enabling me to offer tailor-made jewelry solutions. I honed my skills in creating jewelry collections, focusing on diverse types of fine jewelry. My expertise extends beyond mere designing – I have undergone hands-on goldsmith training, forging a profound connection with the intricate processes that bring jewelry to life. My professional background drives my creative process and guarantees that my designs are feasible for manufacturing and unique in their design.

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plan... Read more

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plans to architects and homeowners for permit and construction. I can provide a very economical design that save money and reduce construction time for the following type of structures:- post tension slabs piers foundations Wood framing and Steel framing Roofing Wind Bracing systems Also I can do observation on the foundation and the structural framing and provide letter to the city as required.

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviatio... Read more

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviation, Electrical Contracting, Healthcare, and the Security industry. Authorized to work in the US for any employer with a Private Security Clearance.

I fell in love with architecture in 1982. I did a mail-order class - in 8th grade! I now love the technology available, being immersed into a design I saw in my mind and can visually walk through. I a... Read more

I fell in love with architecture in 1982. I did a mail-order class - in 8th grade! I now love the technology available, being immersed into a design I saw in my mind and can visually walk through. I am not an engineer or architect, but I have studied enough over the years to apply my interior design skills with my staging experience, added to the 3D programs I love, to create amazing things. I am the one people come to and describe something and I have it done before their last word. I am the one who takes your ideas and can create an affordable 3D design to help you know what the finished project will be. I give you a chance to change things on paper before they are set in stone, literally. I show you if the color palate you desire will look good with the flooring. I show you how it will all look together, finished, before you even start. No more blueprint changes! It’s so costly to add a window! Decide now, when a few clicks can change anything or everything. Let me help your vision come to life!

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print... Read more

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print Solutions for their online growth. With the vision of Enabling Print Business on the Web it has been able to successfully create customized solutions for the printing industries. With clients in more than 40+ countries, our clients are from top 10 countries of Unites States, UK, Netherlands, Germany, Australia, Switzerland, France, Canada, Denmark, and Brazil. 80% of USA clients belong to 4 major states of California, New York, Florida, and Texas.

A student looking for job opportunities to expand their skills and help you accomplish your desires. Proficient in Autodesk Inventor, Fusion 360, and Onshape.

A student looking for job opportunities to expand their skills and help you accomplish your desires. Proficient in Autodesk Inventor, Fusion 360, and Onshape.

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil & Gas industry, and a proven track record in 3D modeling, I am confident in my ability to... Read more

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil & Gas industry, and a proven track record in 3D modeling, I am confident in my ability to contribute effectively to your team. I began my design career in 2013 and have since completed over 500 projects, ranging from robots and mechanical parts to architectural designs. My career started in graphic design, where I developed technical plans and 3D models for both architectural and engineering projects. My expertise in CAD/CAM software, including SolidWorks and AutoCAD, has been essential in ensuring the precision and visual quality of complex representations. While at Numare LDTA, I successfully delivered over 250 projects, mastering tools such as SketchUp, rendering software, and the Microsoft Office suite. Thank you for considering my application. I look forward to the opportunity to contribute to your projects. https://cults3d.com/en/users/Gaisa3D/3d-models

Hi, I'm a part-time employee for architectural design. I have just graduated and I am very enthusiastic and looking to gain experience.I am skilled in 2D and 3D design and I work with these software... Read more

Hi, I'm a part-time employee for architectural design. I have just graduated and I am very enthusiastic and looking to gain experience.I am skilled in 2D and 3D design and I work with these software: 1)Revit 2)Autocad 3)Enscape I have a degree in architectural engineering from Bahoner University in Kerman, Iran Thank you for your time

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored prod... Read more

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored product, model and render a new product or concept, produce RFQ-ready technical drawings with full GD&T, or develop quality, easy-to-use tooling/jigs/fixtures for your manufacturing line, I can do it! I am a Certified SolidWorks Professional and an expert in Fusion360 - licenses for both of which I own. In particular, I excel at building parametric, equation-driven models and design tables at the part, sub-assembly, and top-level assembly levels. I am also experienced at parametrically linking Solidworks drawings for automatic information updates. My manufacturing experience includes injection molding, thermoforming, extrusion, acoustic felt, sheet metal, steel/concrete pipe, additive manufacturing, 3-axis CNC, and product assembly. I've reverse-engineered, designed, and revised hundreds of custom products and tools. I have worked the production floor myself, so I know what to look for and ask about when designing for production. I can build small- to mid-size mechanical prototypes, such as a small prototype refrigerator that I designed and built in the second half of 2022. I have the ability to produce parts via FFF printing. I can also assist you in locating quality vendors for tooling and production. Certifications: Certified Solidworks Professional in Mechanical Design (CSWP-MD) C-8SKX4GBT3R Certified Solidworks Professional Advanced - Sheet Metal (CSWPA-SM) C-F67ZHEX3WR Certified Solidworks Professional Advanced - Drawing Tools (CSWPA-DT) C-UA37YPGQKM Solidworks PDM Professional, by GoEngineer.

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a... Read more

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a complex fixture, I am here to help! - Proficient in Solidworks and Creo Parametric - Full project management from start to finish - Regular communication is critical for success

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Born and raised in Houston, Texas. I completed high school in Conroe, Texas (Conroe High School) and was accepted to attend studies at Texas A & M University. Due to a life changing event I was unab... Read more

Born and raised in Houston, Texas. I completed high school in Conroe, Texas (Conroe High School) and was accepted to attend studies at Texas A & M University. Due to a life changing event I was unable to complete my studies there and returned home to be employed by the local electric utility company, Gulf States Utilities. Hired as a line helper in 1979, I worked in construction and maintenance of the electrical utility facilities working my way up thru the ranks from helper to apprentice lineman then to lineman 4th class then to lineman 3rd class. Once I had achieved 3rd class I was able to transition to the service department where I was trusted to work on a truck by myself unsupervised working customer service tickets and troubleshooting outages that occurred on the lines. In 1991 Gulf States Utilities was purchased by Entergy and around this time I transitioned back into the line crew in the Woodlands Network to continue construction and maintenance work on most underground but occasionally overhead lines as well. April of 1999 I transferred to the Design West group of Entergy Texas, Inc. as an Engineer Assistant and a short time later, I earned the title of Senior Engineer Assistant. I presently continue to hold that title. My present job description entails meeting with customers to determine their electrical needs, design Entergy's facilities to serve these customers, procure easements for Entergy's facilities, draft contracts and collect contributions and assemble construction job packets to hand off to our line crews to build. During the last 18 years of my employment, I have used MS Office Suite's Word, Excel, Outlook, Power Point and Access and I have used Auto CAD on a daily basis and in the past 4 years I have used GIS, Pole Foreman and other software.

With a background in Interior Design and sales, I have transitioned into pool and backyard design. I offer pool industry Sales & Design Team assistance and work overload, real estate concept and vis... Read more

With a background in Interior Design and sales, I have transitioned into pool and backyard design. I offer pool industry Sales & Design Team assistance and work overload, real estate concept and visualization services, personal backyard oasis design, etc. Great option for pool builders who don't offer the 3D renderings and videos potential clients want to see before they buy. I utilize your submitted ideas, photos, hand sketches, survey, real estate listing, GIS location, etc. to create 2D construction drawings, 3D animation renderings, photo renderings, video renderings, etc.

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing... Read more

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing 3D models, isometrics, orthographic drawing of piping systems based on the field survey, process and equipment information and technical specifications provided by the customer.

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japa... Read more

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japan when I turned 18, on invitation by Kobun Chino Otogawa to participate in an informal cultural exchange. Lived and worked with Kanjuro Shibata, bow-maker to the emperor, and Zen archery master in Kyoto for about 2 years. Instead of returning to the US as planned, I continued across fascinating Asia for 1 year and then studied and worked in Paris, France for 7 years as a fine artist. Then I returned to California, built on to a cabin and added a studio. Started an art and design studio and contract design service for manufacturers and suppliers to big box retailers for about 10 years. Then I moved to Austin, Texas and worked for Philips Lighting as head designer, (senior manager, R+D) for 11 years, and led a design team. My designs won a number of innovation and design awards and were on the cutting edge of LED lighting, as well as extremely market-successful. In 2017, decided to become an independent designer again, as well as an investor, (instead of moving to Boston to continue my rewarding corporate career with Philips). Since then I have been trading futures and options, and taking on design projects, as well as advising my wife with her startup business. I'll write a book about it when I turn 80 ;-)

10 years of CAD drafting experience.

10 years of CAD drafting experience.

I am a hard working, detail oriented mechanical engineering student looking to further my knowledge and understanding of complex concepts and ideas. I love the ability to challenge myself to gain adva... Read more

I am a hard working, detail oriented mechanical engineering student looking to further my knowledge and understanding of complex concepts and ideas. I love the ability to challenge myself to gain advanced skills and practical knowledge. I take pride in my hard work ethic and my ability to see concepts from a manufacturing point of view. I have both design and fabrications experience and I understand the lack communication and understanding regarding the ability to manufacture. I have had the experience in school of replicating a stapler in both 2D and 3D CAD, this was then 3D printed and was fully functional. Also I designed a CAD model of a go-kart that met the requirements of functional suspension and fully functional steering including linkage. I look forward to discussing future projects that allow myself to provide the best of my abilities and allow me to further my knowledge.

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept design... Read more

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept designs and installation, start-up, acceptance testing, and electrical safety Panel modifications and upgrades. Specialties: - Controls Engineering - Machine Safeguarding Electrical & Hard Guarding - Arc Flash Safety PPE Requirements - Power/Control Panel Design - Engineering Administration - Panel/Control System Upgrades - AutoCAD Electrical (2011-2013) - PLC Programming (Allen Bradley Micro, 500, Studio 5000) - Microsoft Office (Word, PowerPoint, Excel) - SCADA HMI Design (Wonderware, Panelview, C-More) - Wireless, Broadband network communication - Industrial Low Voltage Grounding and Short-circuit Protection - Arc Flash Panel Assessments (Easy Power) - Design Electrical Safety Controls - Interpret Electrical Single Line Drawings - Mange Small Capital Projects (< 150K) - Working Knowledge of NEC, NFPA 70E and NFPA 79 - Machine Guarding Team Leader - Root Cause Problem Solving - Supply Chain Management

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighti... Read more

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighting, Compositing (Scene Assembly), Video Game Level Assembly, World Building, and Lighting. Software includes but not limited to 3D Studio MAX, Maya, Modo, Photoshop, ZBrush.

2D graphics design 2D to 3D for product renderings , 3D printing Part design for plastic injection molding Sheet metal part design Concept renders Building concepts and renders

2D graphics design 2D to 3D for product renderings , 3D printing Part design for plastic injection molding Sheet metal part design Concept renders Building concepts and renders

Design of packaging, mascots, 3D and advertising motion design with unique music for promotion on social networks, but animated billboards and exhibitions. I use the Blender 3D program.

Design of packaging, mascots, 3D and advertising motion design with unique music for promotion on social networks, but animated billboards and exhibitions. I use the Blender 3D program.

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and con... Read more

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and consumer products (water bottles, utensils, etc.). I take design and product requests, and will do my absolute best to ensure the client's needs are met! I look forward to working with you!

Student of Bachelor in Mechanical Engineering and professional in 3D modeling with Solidworks and Rendering in Keyshot

Student of Bachelor in Mechanical Engineering and professional in 3D modeling with Solidworks and Rendering in Keyshot

I focus on exterior and interior architectural renderings using various software to that fits the need of the project and client. I love what I do and working with others to help create a vision into... Read more

I focus on exterior and interior architectural renderings using various software to that fits the need of the project and client. I love what I do and working with others to help create a vision into reality.

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work in... Read more

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work instruction drawings to represent multipart products and can include single part pieces with DXF files for CNC programming.