Hire CAD designers & engineers in Kendallville, Indiana

Licensed architect in Indiana (AIA, NCARB certified) with 10 years of residential and commercial experience and a long list of repeat builder clients. I started my career in construction, earned my Ma... Read more

Licensed architect in Indiana (AIA, NCARB certified) with 10 years of residential and commercial experience and a long list of repeat builder clients. I started my career in construction, earned my Master of Architecture, and spent the last few years in an Indianapolis firm working on commercial and industrial projects. I recently went back to self-employment full time, and I'm taking on new residential and light commercial work now. WHAT I DELIVER - Custom home design: floor plans, elevations, and 3D views from your sketches, a plan you found, or a blank site - Permit-ready construction sets: floor plan, foundation design, roof design, electrical design, details and sections as needed - Plan redraws and cleanups from hand sketches, PDFs, or old CAD files into a clean Revit model - Exterior style options and photorealistic renderings for builders and spec homes - Additions, remodels, ADUs, and commercial interior fit-outs HOW I WORK I primarily work with repeat builder clients to produce residential design and spec home packages. I also work directly with homeowners and provide full design services with revisions as needed and screen-share meetings on request. All projects are produced in Revit, which I've used daily for over a decade. Design and plan sets are quoted fixed-price by square footage of living area once I see your sketches, lot, or existing plan; revisions beyond the included rounds are hourly. SOFTWARE: Revit, AutoCAD, Lumion, Bluebeam. Share your sketches, your lot, or the plan you want fixed and I'll tell you what it takes.

Autodesk Inventor - Expert Autodesk Fusion 360 - Skilled Industries -Aerospace, pharmaceuticals, Defense My biggest experience is reverse engineering components that are either impossible to find at... Read more

Autodesk Inventor - Expert Autodesk Fusion 360 - Skilled Industries -Aerospace, pharmaceuticals, Defense My biggest experience is reverse engineering components that are either impossible to find at an affordable price, or simply do not exist anymore. I have successfully reproduced components 100+ years of age, all the way up to modern components to the most complex machines.

I am proficient in Computer-Aided Design and am offering my 3D design and drafting services. I am a Sophomore at Purdue University, studying mechanical engineering. I have worked as a design engineer... Read more

I am proficient in Computer-Aided Design and am offering my 3D design and drafting services. I am a Sophomore at Purdue University, studying mechanical engineering. I have worked as a design engineer for two years, gaining proficiency in tolerancing, GD&T, parametric modeling, and design. I have competed nationally in Technical Drafting, placing 11th in the nation in 2025 after placing first in the Michigan conference.

▒▒▒▒▒▒ link for past projects: https://www.▒▒▒▒▒▒.com/freelancers/~01927bb67900547196 I am a versatile Mechanical Design/Simulation Engineer with 5 years of broad & extensive experience working wit... Read more

▒▒▒▒▒▒ link for past projects: https://www.▒▒▒▒▒▒.com/freelancers/~01927bb67900547196 I am a versatile Mechanical Design/Simulation Engineer with 5 years of broad & extensive experience working with clients in various industries like: • Accessories & Wearables • GPS Trackers • Mailing/Postage Saving • Automotive • Arms Weapon • Household/Furniture • HVAC/Floor Plan • 3D Printing • Bioengineering • Electronics/Enclosures • Cooling Systems & Heatsinks • And many more I specialize in: • CAD Drafting/Modeling/Simulation/Animation from rough sketches • Blueprint-Engineering Drawing-CAD (2D-3D) conversion • Rendering for both commercials and internal presentation • Spill, leak, water & heat-proof modeling & simulation • Multiple file conversion techniques ranging Photoshop's .ai to 3D printer's .stl. • Material selections & rendering • BOM & Revision change maintenance • 3D Printing techniques like .stl modification and additive manufacturing • Liquid, Spin & Injection molding techniques and clearance requirements for plastics and metals • Company logo creation/modification • 3D Modeling tutorial & guidance • I am also experienced in Adobe Photoshop & Illustrator creating posters & logos • And many more Leaving a project hanging/incomplete is the one thing I will never do. When we come to an agreement about the project, I pledge to never disclose the project under any circumstance unless I have your approval. I will never accept any project or send any proposal to a project without a careful consideration of my skills, field of expertise, time availability, project time frame and other essential factors to the success of the project. I will do my very best to accommodate whatever you need even if it is not under my scope of work or even if that means the project would be extended several times, which happens a lot. I am available 24/7 via ▒▒▒▒▒: jan.sunaryanto and email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Thank you in advance, I look forward to working with you :). Best Regards, Jan Bastian Sunaryanto http://jansunaryanto.branded.me ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry de... Read more

I am a Mechanical and Drafting Engineer with a background in product development and marketing strategies. I own a local design firm with which I work primarily in the firearms and defense industry designing and producing high quality aftermarket parts and assemblies for both private and commercial markets. I currently hold 3 patent pending designs/products in the firearms industry with 3 more being added in the second quarter of 2017 with new product releases. I have a keen understanding of metallurgy, product development, and working within manufacturing practicality guidelines as well as an individual manufacturer's machining capabilities. 3D modeling is where my skills are best put to use as I love creating products no matter their complexity or the overall challenge in front of me. I am able to design parts or products of any size quickly and efficiently. I also have the ability to quickly create basic models with complete assemblies or sub-assemblies according to your needs and specifications.

Daniel Wallace is a highly creative and multitalented 3D Designer with extensive experience in Jewelry, Manufacturing and Specialty Metalsmithing. Exceptional collaborative and interpersonal skills;... Read more

Daniel Wallace is a highly creative and multitalented 3D Designer with extensive experience in Jewelry, Manufacturing and Specialty Metalsmithing. Exceptional collaborative and interpersonal skills; dynamic team player with well-developed written and verbal communication abilities. Highly skilled in client and vendor relations and negotiations; talented at building and maintaining “win-win” partnerships. Passionate and inventive creator of innovative manufacturing strategies; accustomed to performing in deadline-driven environments with an emphasis on working within budget requirements. Creative experience in the following: · 3D Modeling/Rending · Rhino 3D · GemVision Matrix · Pixologic- Sculptris · KeyShot Rendering · Manufacturing · Lost Wax Casting · Fabrication · Wax Carving · Forming/Forging · Blacksmithing · Specialty Metalsmithing Techniques - Tool Design · Stone Setting

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawing... Read more

I am an Engineering Manager at an industrial rotating equipment manufacturer in the United States with 12+ years of experience in package design, product development, 2D and 3D CAD work, sales drawings, preliminary layouts, P&IDs, and more. My expertise is in rotating equipment, specifically centrifugal pumps, vacuum pumps, and compressors from 1.5 HP (1 kW) to upwards of 1,000 HP (750 kW). I have also had experience in other pneumatic applications as well as office furniture design. I have designed piping runs (including valves, gauges, transmitters, other instrumentation), structural steel frames, gear reducers, V-Belt driven equipment, selected motors, designed for adherence to stringent specifications, and communicate regularly directly with customers. I am finishing my Bachelor's degree in Mechanical Engineering Technology and will continue to pursue my MBA after that. I am offering services in Solidworks 2019 (2D & 3D) and Draftsight (2D) and can save files in any of the supported formats (i.e. .SLDPRT, .SLDASM, .SLDDRW, .STEP, .DWG, etc.) If you are looking for a quick layout, concept, or have a small part that needs to be modeled in 3D I can make that happen. If you need a full blown design with detailed 2D drawings I can make that happen as well. I oversee my projects from start to completion!

Independent CAD designer specializing in mechanical and concept modeling using SolidWorks. I enjoy developing clean, functional designs and translating ideas into precise 3D models. My work includes... Read more

Independent CAD designer specializing in mechanical and concept modeling using SolidWorks. I enjoy developing clean, functional designs and translating ideas into precise 3D models. My work includes mechanical parts, assemblies, and original concept designs. I focus on accuracy, clarity, and practical design solutions.

Hello my name is Jason I have 17 years experience as a project manager/auto cad technician/3D designer. I have a lot of experience creating production blueprints, floor plans, elevations, as well dr... Read more

Hello my name is Jason I have 17 years experience as a project manager/auto cad technician/3D designer. I have a lot of experience creating production blueprints, floor plans, elevations, as well drawings for CNC production. I also have the ability to create 3D photo realistic drawings. I have worked for seven years in the exhibit industry. This allowed me to work with some of the newest and greatest material available. Such as paper stone and bamboo plywood. I also worked for two years as the main drafting /engineer/project manager at a millwork shop that produced all of the interior decor to four restaurants. I have worked for two exhibit companies as a project manager/auto cad technician. The exhibit industry is always looking to use the latest and greatest materials. Designing and building booths for tradeshows always makes you think outside the box. Not only did we design and create 3D renderings of the booths we also created all the production plans required to build and assemble. After the exhibit industry I worked as a project manager/auto cad technician/designer, at a millwork/interior decor company. Here I have a lot of freedom to think outside the box as well. I created drafting and drawing standards at the facility that are still in place today. At this company I would take architectural drawings and turn them into 3D renderings as well as construction documents.

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (

I am a freelance pool & landscape designer. I use Structure Studios' VIP3D software for all my designs. I have over 10 years of construction experience. Contact me to get started on the outdoor space... Read more

I am a freelance pool & landscape designer. I use Structure Studios' VIP3D software for all my designs. I have over 10 years of construction experience. Contact me to get started on the outdoor space of your dreams!

I am a Certified SolidWorks Professional that would love to tackle your project. I guarantee prompt, accurate results without breaking the bank. I currently design fixtures/stands for products and equ... Read more

I am a Certified SolidWorks Professional that would love to tackle your project. I guarantee prompt, accurate results without breaking the bank. I currently design fixtures/stands for products and equipment daily. I can work from anything as simple as a ‘napkin sketch’ up to professional drawings and even written descriptions. Send your ideas/needs my way and you will have your finished product in no time. I am very familiar with the techniques for 3D printing using minimal material while keeping a very strong structure. By applying this acquired skill, I could design your product within your parameters to not only stand out by having flair and complimenting your idea, but also saving you money during the 3D printing phase as I will use less material than other designs might. I work for a consumer electronics company. I was a member of the product design team so much of my work involved the portion of the item that consumers handle and see. Now I work on the manufacturing side of the same company so I am able to have the experience of both product design and product manufacturing.

Very unique skillset. Innovative. Extremely hard-working. 13 years of professional experience with a robust and diverse portfolio. Projects range from large-scale stone sculptures using ancient... Read more

Very unique skillset. Innovative. Extremely hard-working. 13 years of professional experience with a robust and diverse portfolio. Projects range from large-scale stone sculptures using ancient carving techniques, to cutting-edge 3D architectural models using the latest BIM and rendering software. I work in a wide-range of mediums, both by hand and digitally. The more I expand into another category, the more it enables me to push the limits of the next. For instance, the more I have developed my freehand drawing skills, the more I have been able to push what I do in the computer. And vice versa. This well-rounded background allows me to approach each project organically, without being biased towards one fixated linear process. This allows for more design feedback to occur, and it also translates to multiple solutions for each project. This means that you'll be able to visualize your project in the best possible way, tailored to you. Architecture is primary focus, but other creative design projects are encouraged. Scope of work could include anything from large architectural visualization projects to quick one-off design studies or initial prototype models. Software Skills Expert Level: □ Revit (10,000+ hrs, Pro Certified, Custom Apps) □ Form Z (geometric/semi-organic modeling) □ SketchUp High Proficiency: □ Photoshop (Arch. Focus) □ AutoCAD □ Mudbox (Digital Sculpting) Decent: □ 3ds Max (Rendering, Vray, Poly Modeling) □ Artlantis (Architectural Cinematography) - Extremely proficient in rectilinear modeling, BIM, and geometric modeling. Proficient in organic modeling and digital sculpting. - Experienced and well-rounded enough in software knowledge to create whatever can be imagined in 3D format, one way or another. - I regularly use several other software programs for various purposes in the design/build workflow. - Skilled in rendering, but my 3D models are often highly detailed working models of the design, as opposed to rendering-only as an end-goal. High-end renderings and presentations are also available as required to market, visualize, or simply to "sell your idea". Hand Skills Conceptual Design, Freehand Sketching and Drawing (pen, pencil, or ink and marker), Watercolor and Oil Painting, and Stone Sculpture.

I’m a mechanical engineer specializing in mechanism design, CAD assemblies, and mechanical analysis. I help turn early concepts into manufacturable designs, including full 3D CAD assemblies, productio... Read more

I’m a mechanical engineer specializing in mechanism design, CAD assemblies, and mechanical analysis. I help turn early concepts into manufacturable designs, including full 3D CAD assemblies, production drawings, and engineering validation through analysis. Here are just some of my capabilities: Mechanism design Spring systems Machine components FEA / stress analysis Manufacturing drawings Design for manufacturability

I work for a vending machine and cooler Remanufacturer as an Associate Engineer. I spend most of my time reverse engineering OEM parts to have them made in our sheet metal department to reduce costs u... Read more

I work for a vending machine and cooler Remanufacturer as an Associate Engineer. I spend most of my time reverse engineering OEM parts to have them made in our sheet metal department to reduce costs utilizing Siemens Solid Edge ST8. I waited a long time before starting my Engineering Education. I spent 10 years working for a solar panel manufacturer in production and process engineering. I then spent 2.5 years working for a local community college in their Alternative Energy Program before landing my current job.

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manuf... Read more

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manufacturable product that meets their specific goal. Based on your needs, you may choose from any number of the following services: - Concept Development - 3D Modeling & Rendering - Mechanical Analysis - Drawings & Documentation - Fabrication Sourcing - Consulting Certifications: Bachelor of Science in Mechanical Engineering - Valparaiso University, 2011 Certified SolidWorks Professional

I create detailed 3D models and CAD drawings from concepts, sketches, photographs, scans, and existing plans. My work includes architectural details, decorative reliefs, sculpture, custom products, an... Read more

I create detailed 3D models and CAD drawings from concepts, sketches, photographs, scans, and existing plans. My work includes architectural details, decorative reliefs, sculpture, custom products, and models prepared for CNC machining. I bring more than 20 years of experience in the Indiana limestone industry, including drafting, estimating, CNC programming, and project management. That practical background helps me account for dimensions, tooling access, assembly, and fabrication while developing a model. My projects have included ornate church doorway components, sculptural medallions, custom benches, architectural trim, and complex curved stonework. I work with Rhino, Blender, AutoCAD LT, and Fusion 360. Services include: • 3D modeling and digital sculpting • Architectural and ornamental detailing • Scan cleanup and model reconstruction • CNC model preparation • 2D drafting, profiles, and fabrication patterns • Conversion of drawings and reference materials into 3D models Stonework is my strongest specialty, and I welcome modeling projects across other materials and industries. Send me your references, dimensions, and intended use so we can define the scope and deliverables.

Graduated from IU/Bloomington in 1999. Taught HS math and did some IT work from 1999-2011 before settling in my current position.

Graduated from IU/Bloomington in 1999. Taught HS math and did some IT work from 1999-2011 before settling in my current position.

I have been using Autocad as a hobby since 1993 with Autocad release 12 and a 386. I thought wow, this is the coolest thing ever. I now use fusion 360. All self taught. I did take one class at IV tech... Read more

I have been using Autocad as a hobby since 1993 with Autocad release 12 and a 386. I thought wow, this is the coolest thing ever. I now use fusion 360. All self taught. I did take one class at IV tech. It was a joke. I knew more than the teacher.

I will provide high quality photorealistic visualizations for your architectural designs. I am offering to develop a design package with Autocad,Revit or Sketchup & deliver: Detailed CAD, Sketchp or... Read more

I will provide high quality photorealistic visualizations for your architectural designs. I am offering to develop a design package with Autocad,Revit or Sketchup & deliver: Detailed CAD, Sketchp or Revit BIM model Parametric families Detailed Floor Plans Ceiling Plans Elevations Sections Details Renderings Walkthroughs BEFORE YOU Put in YOUR Request: - It would be ideal if you Get in touch with ME FIRST for proper project understanding and to provide me with the details for your project (include dwg or jpg floor plans and elevations according to image perspectives needed) - I will then confirm pricing and deadline of the project

Over 30 years of construction experience Over 20 years of drafting experience AutoCAD, Sketchup, Solid Edge, Revit Resume available at angelenterprise.com/resume

Over 30 years of construction experience Over 20 years of drafting experience AutoCAD, Sketchup, Solid Edge, Revit Resume available at angelenterprise.com/resume

Experienced electrician and engineering technician with a demonstrated history of working in the automated machine industry and energy industry. Skilled in AutoCAD, Microsoft Office, Sales, Management... Read more

Experienced electrician and engineering technician with a demonstrated history of working in the automated machine industry and energy industry. Skilled in AutoCAD, Microsoft Office, Sales, Management, and Leadership.

Licensed architect since 1989, NCARB certification, REVIT, AutoCad, SolidWorks, CATIA, Gehry Technologies Digital Project

Licensed architect since 1989, NCARB certification, REVIT, AutoCad, SolidWorks, CATIA, Gehry Technologies Digital Project

I have 4 years of experience with Autodesk Inventor. I am also a certified Autodesk Inventor user. I have 1 year experience with Autodesk Revit. I have completed the Project Lead The Way curriculum. T... Read more

I have 4 years of experience with Autodesk Inventor. I am also a certified Autodesk Inventor user. I have 1 year experience with Autodesk Revit. I have completed the Project Lead The Way curriculum. The curriculum included manufacturing processes and robotics in addition to the CAD design.

Hands-on mechanical and simulation engineer with over 20 years of experience leading design and validation across PPE, medical devices, and consumer products. Specialized in SolidWorks and Abaqus for... Read more

Hands-on mechanical and simulation engineer with over 20 years of experience leading design and validation across PPE, medical devices, and consumer products. Specialized in SolidWorks and Abaqus for structural, impact, and thermal analysis. Proven success in developing helmet liners, custom-fit respirators, and advanced 3D imaging systems. Extensive experience with digital prototyping, CFD pressure drop modeling, and porous media calibration. Comfortable collaborating remotely on R&D and production-scale projects, especially for startups and small teams. Open to part-time consulting and flexible freelance work.

I specialize in fast and accurate CAD file conversions, including converting AutoCAD drawings to clean, properly formatted PDF sets and recreating PDFs into editable CAD files. I have experience orga... Read more

I specialize in fast and accurate CAD file conversions, including converting AutoCAD drawings to clean, properly formatted PDF sets and recreating PDFs into editable CAD files. I have experience organizing drawing sets, correcting scaling issues, and ensuring layouts are properly centered and ready for printing. I pay close attention to detail so files are clear, consistent, and easy to use. Whether you need bulk PDF conversions or existing drawings recreated into CAD, I can deliver clean, reliable results with quick turnaround times.

I am an Electrical Engineer in the HVAC Controls industry. I also have past work experience in the MEP consultant design field.

I am an Electrical Engineer in the HVAC Controls industry. I also have past work experience in the MEP consultant design field.