Hire Local CAD Designers near Jonesboro, Georgia

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to... Read more

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to serve the BOM and the brand.

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I ha... Read more

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I have been in Mechanical Design using Solid Works & Solid Edge. I can produce 2D prints using DraftSight (AutoCad clone). I can also produce 3D models using the aforementioned programs. I can also produce photo-realistic renderings out of CAD models. I recently started my own Freelancing business called Scott Lester Drafting & Design. On the side, I teach Engineering Design at the same community college I graduated from.

Freelance CAD drafter and 3D modeling specialist with 7 years of experience in architectural millwork and tradeshow exhibits. I deliver precise, fabrication-ready shop drawings and 3D models that move... Read more

Freelance CAD drafter and 3D modeling specialist with 7 years of experience in architectural millwork and tradeshow exhibits. I deliver precise, fabrication-ready shop drawings and 3D models that move seamlessly from design to the shop floor. I hold a BST in Architectural Manufacturing Management and Technology. Notable projects include the FIFA Home Depot Backyard Exhibits, Chick-fil-A Campus Headquarters, Caesars Superdome, and The Ned — recipient of the Washington Building Congress Star Award. Software: AutoCAD 2D/3D, Microvellum, SketchUp.

I enjoy helping consumer brands turn product concepts into photorealistic marketing visuals for campaigns and product launches.

I enjoy helping consumer brands turn product concepts into photorealistic marketing visuals for campaigns and product launches.

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

My company is designed to provide engineering and drafting services to your company at flat rate cost. We focus on Mechanical, Structural, Metal Fab design and Drafting. Have an idea for an invention?... Read more

My company is designed to provide engineering and drafting services to your company at flat rate cost. We focus on Mechanical, Structural, Metal Fab design and Drafting. Have an idea for an invention? We also produce Patent drawings to get your idea patented and also produce your prototype. Also we will produce shop drawings to have your invention manufactured. Our motto is you think it up. We make it come to life!! If you have any questions or would like to hire our services please feel free contact me for a free quote.

Currently finishing up my Architectural Drafting Degree at Gwinnett Technical College. My specialty is AutoCad, also learning Revit. Looking primarily for freelance opportunities with the potential fo... Read more

Currently finishing up my Architectural Drafting Degree at Gwinnett Technical College. My specialty is AutoCad, also learning Revit. Looking primarily for freelance opportunities with the potential for full time.

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industr... Read more

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industrial projects

Mason Russell is a mechanical engineer with a strong background in aerospace design, rapid manufacturing, and system integration. He holds a B.S. in Mechanical Engineering from the University of Tenne... Read more

Mason Russell is a mechanical engineer with a strong background in aerospace design, rapid manufacturing, and system integration. He holds a B.S. in Mechanical Engineering from the University of Tennessee at Chattanooga and has hands-on experience with SolidWorks, CATIA, AS-9100, MIL-STDs, and additive manufacturing. Currently, he supports the B-52 Bomber’s Rotary Launcher and Pylons as part of a major hypersonic missile integration project, where he leads procurement, technical documentation, and vendor relations. His prior experience spans medical device design at Nordson Medical, process optimization at Mohawk Industries, and plastic forming manufacturing at The Woodbridge Group. A proven leader, Mason served as President of UTC Rocketry, where he guided a NASA USLI team in building and launching an autonomous imaging rocket. He is also pursuing passion projects such as autonomous drone development for emergency response. Outside of engineering, Mason is an avid sports enthusiast, guitarist, and 3D printing content creator.

Began career as drafter for Honeywell in 2011 (commercial and industrial fire protection design) Tradeshow Exhibit House Designer Very Creative Problem Solving Skills

Began career as drafter for Honeywell in 2011 (commercial and industrial fire protection design) Tradeshow Exhibit House Designer Very Creative Problem Solving Skills

I'm a mechanical engineering student (4th year, University of Georgia, B.S. expected May 2027) with hands-on experience designing and reverse-engineering hardware for defense and tactical equipment ma... Read more

I'm a mechanical engineering student (4th year, University of Georgia, B.S. expected May 2027) with hands-on experience designing and reverse-engineering hardware for defense and tactical equipment manufacturers. My core work is taking physical parts with no existing documentation — measured by hand, no 3D scanner — and producing accurate, manufacturing-ready CAD from them, along with original component design built for injection molding, CNC, and additive manufacturing from the ground up. What I bring: Reverse engineering from physical parts to production-ready models (Fusion 360; SolidWorks proficiency in progress) Design for manufacturing (DFM), GD&T, and tolerance stack-up analysis Rapid prototyping via in-house 3D printing (daily operation of Bambu Lab P1S/H2D) Working exposure to CNC machining and injection molding processes Clear, responsive communication — I treat every project like it has a real deadline, because it does I've completed 12+ CAD projects for a defense hardware manufacturer, including original component design and reverse-engineering work, and built a tutoring track record teaching CAD and engineering physics to other students. I'm not yet a licensed engineer or degree-holder — I'm upfront about that — but the deliverable speaks for itself: accurate, dimensionally sound, manufacturing-ready files, delivered on time. Happy to start with a smaller project if you want to see the work before committing to something larger.

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and ha... Read more

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and have worked with manufacturers that make our parts. Autodesk inventor I have been using since a freshman in high school. I enjoy using it as hobby for 3D modeling and 3D printing. I end up making drawings for fun. This is the program I use at home and will be using. I have also used Revit in school when I took a civil engineering and architecture class. I am a mechanical engineering student.

I have worked on many different residential, commercial, and industrial projects single & multi family dwellings, restaurants, hotels, schools, shopping centers, office buildings, pulp and paper plant... Read more

I have worked on many different residential, commercial, and industrial projects single & multi family dwellings, restaurants, hotels, schools, shopping centers, office buildings, pulp and paper plants, fertilizer plants, petrochemical plants, and fossil & nuclear power generation.

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical... Read more

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical device, PSU, Bluetooth speaker, and so on. I provide you DFM(design for manufacturing) with knowledge on various manufacturing processes such as plastic molding, 3D printing, sheet metal design. I have hands on experience in printing using PLA, SLA 3D printers and we are also available to use local printing services for prototyping. I prefer to use Solidworks for 3D design, engineering drawing and rendering. I'm also familiar with B9 creator and Cuda software dedicated to 3D printing design. I'm ready to provide photo realistic rendering images before printing. You will be happy to work with me.