Hire CAD designers & engineers in Jacksonville, Alabama

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years exp... Read more

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years experience in multimedia graphic design, with a Bachelor's degree. My experience allows me to have a quick turnaround and the highest quality for all my clients. I produce work in Print, Video, 3D Modeling and Animation, 2D animation, Presentations (PowerPoint and PDF), Web and other mediums. Online Portfolio: https://www.behance.net/wsfuller Walter Fuller

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundre... Read more

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundreds of sub assemblies and ranging in price for a few dollars to $1M. Additionally, I am well versed in producing photo realistic renderings of products for marketing purposes. I pride myself in providing thorough and accurate deliverables by taking the time to fully understand the challenges my clients face and how to provide the best solution possible.

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involv... Read more

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involve and use in my life beyond hobby level. I have used this to create simple mounts for my GoPro, a couple electronics enclosures, and a more complex structure like a servo controlled robotic arm that I am currently working on and my CNC machine that was mostly 3D printed. I am currently preparing to take a test to earn the CSWA (Certified Solidworks Associate) and after completing this I plan on taking the CSWP (Certified Solidworks Professional) as well.

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet... Read more

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet metal components and assemblies for the Work Truck industry. Currently, I am employed through a military contractor that develops SATCOM systems for various branches of the U.S. Military.

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufact... Read more

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufacturing companies without a single rejection from the USPTO. All of my work is done in 3D using Solid works. I also do freelance product development work for individual inventors and manufacturing companies.

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimiza... Read more

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimization and thoroughness.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experien... Read more

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experience modeling executive furniture for a very well known designer on the Pacific Coast, I have become exceptionally proficient at 3D modelling from minimally detailed hand drawn illustrations. I posses a mixture of artistic creativity and knowledge of form and definition makes me the perfect candidate for the development of your 3D Product Concepts. I excel at lighting and rendering at the photo-realistic level and with an additional 10 years of graphic design experience in magazine, business card, print and promotional layout, I can give your ideas the kind of edge and presentation that will draw the eye of even the most discerning and prudent of investors. I have direct connections for rapid prototyping and injection molding through cadmodels.com, I am one of the 10 elite designers featured on the website. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒, you can email me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or reach me at 541 778 0413

Versatile and creative project manager and product development engineer. My job is to take an idea that's been sketched on a napkin and develop it to the point where it can be put into production at a... Read more

Versatile and creative project manager and product development engineer. My job is to take an idea that's been sketched on a napkin and develop it to the point where it can be put into production at a profit. I manage all aspects of projects, from estimates and budgets and schedules, to supervision of engineers and designers, to client relationships and vendor coordination. I pay attention to aesthetics, ergonomics, manufacturability, performance and cost. I thrive on technical and organizational challenges. Products that I've designed have been manufactured worldwide, from small batches through million-unit runs. A few highlights: - Deciphered and improved a revolutionary padlock design that was malfunctioning and wasn't ready for mass production. After meticulous refinement and adjustment, it was successfully put into production by my customer and sold widely in the USA. - Led a team of engineers to design a set of all-plastic injection molded shopping carts. In addition to being attractive and full of unique features, the carts are nearly indestructible. Watching one of them undergo a 1600 lb overload test will permanently banish the term "cheap plastic" from your vocabulary. The carts are currently being sold nationwide. - Engineered a unique conference room table that includes power and data hubs in retractable pods, a touch-screen control panel in a hidden pocket, light pipes and pivoting wing surfaces. It will be on the market in late 2017. - Led a team of mechanical engineers during development of a high performance dairy robot. While my primary career has always been in product development, I wove a surprisingly successful mini-career as an artist into a 10 year period beginning in the late 90s. In recent years I've spent evenings and weekends on KVgear, a company I founded to design and manufacture accessories for musical instruments. All of these capabilities come together as I solve design and engineering challenges for my clients.

I graduated in 2014 with a Bachelor's degree in Mechanical Engineering and am currently pursuing a MS/PhD degrees in Aerospace Engineering from the University of Alabama in Huntsville. I have been... Read more

I graduated in 2014 with a Bachelor's degree in Mechanical Engineering and am currently pursuing a MS/PhD degrees in Aerospace Engineering from the University of Alabama in Huntsville. I have been working with 3D CAD designs, MATLAB simulations, and Excel since my Freshmen year in college (5 years ago).

I was born and raised in the Birmingham, Alabama area. I speak fluent english and can help with out with any project you can throw my way. I have over 18 years of Drafting and Design experience. I... Read more

I was born and raised in the Birmingham, Alabama area. I speak fluent english and can help with out with any project you can throw my way. I have over 18 years of Drafting and Design experience. I have experience in the Structural, Civil, Electrical, Mechanical, HVAC, and Plumbing disciplines. I also have 6 years experience in 3D modeling.

My career spans the military and automotive industry. With nearly 20yrs of government experience, I understand the standards and regulations expected. Having a depth of applied background, using and t... Read more

My career spans the military and automotive industry. With nearly 20yrs of government experience, I understand the standards and regulations expected. Having a depth of applied background, using and troubleshooting aviation hardware and tooling, has provided a base for understanding design requirements and what will work. Working so closely with aviation and aerospace, my design concept is heavily a less is more method. I prefer lean manufacturing concepts, and strive to reduce weight and cost of all designs.

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-o... Read more

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-of-Autoclave (VARTM, Vacuum Only) car frames to autoclave cured aerospace structures. I have extensive experience in thermal analysis of brake systems, autoclaves, ovens, and tooling.

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manuf... Read more

I have several years designing anything from lifting, transportation devices for wind energy to service devices. I have done several projects for reverse engineering as well as shop drawings for manufacturers.

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always lo... Read more

I am a mechanical engineer with experience designing various components and assemblies. In my spare time I like to design various machined components, motion components, fixtures, etc. I am always looking for a new challenge.

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also... Read more

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also adapt and apply the many methods and techniques I’ve acquired through study, and interest, in a broad spectrum of scientific disciplines; and can organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems

With 20+ years of design and engineering experience, Parabolic Designs can assist in bringing products to life! We have a wealth of resources in design and engineering along with the ability to have y... Read more

With 20+ years of design and engineering experience, Parabolic Designs can assist in bringing products to life! We have a wealth of resources in design and engineering along with the ability to have your part built in production or prototyping phases. From art to part, we bring your product to life!

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and redu... Read more

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and reducing the need for physical prototypes. 2. **Creative Flexibility** – 3D tools allow for easy experimentation and adjustments, offering unlimited creative freedom to modify and optimize designs quickly. 3. **Increased Efficiency** – 3D software speeds up the design process by allowing real-time adjustments and error detection, reducing production costs and minimizing rework.

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Mach... Read more

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Machine Trades after a short career teaching High School he took a position in industry as a inspector in the quality control department of an automotive seat belt company. He was promoted into engineering where he was assigned to the drafting and modeling department. From there he was promoted into a new R&D department. He came up with many new ideas and 5 were patented. And being the designer he was responsible for the product including purchasing, incoming inspection, manufacturing, testing, quality control, shipping and finally field return analysis. He furthered his career by taking a position position with an automotive supplier as a designer of plastic parts, rubber hoses, ridged steel tubes, stamped metal, plastic injection molds for Ford, Chrysler, GM, Honda, Nissan, John Deere, Caterpillar, and Navistar. Jeff is a great fit for any mechanical design, tool design, project management, new product development or process analysis because of his extensive experience in design, manufacturing, product development, machine trades, quality control, 3D modeling, drafting, print reading, design and creative imagination. Feb 2015 completed CATIA modler, Enovia and Kola training. Jeff also had an antique repair/refinish/woodworking side business so he is familiar with furniture manufacturing Manufacturing engineering, machining, 3D CAD design, Plastic part design, mold design, tool design, fixture design, gauge design, 2D drafting, medical equipment design and repair, GD&T, SPC, woodworking, automotive interior design, safety systems (seat restraints) design. Test machine design, Test design, Work instructions, time studies, operator training, quality control. Five patents for restraint component design. Worked with Ford, GM, Chrysler, Honda, Nissan, John Deere, Caterpillar, Navistar, Volvo, Seat belts, child seats, mold design, machining, tube design, hose design, glass, design, seal design, machine design, furniture design, machining . fixture design, time studies MS office, SDRC i-deas, AutoCAD Inventor, AutoCAD Mechanical Desktop, Pro-E, Siemens NX, KOLA, CATIA, Enovia, Time studies, Operator Instructions, Operator Training and Quality Control, FMEA, Kaizen, 5 why, plant layout, material handling, lean manufacturing, cell layout

NC Programmer/Tool Designer/Planner/Modeller Do you have a part that you just do not have time to plan, tool and NC program? I can provide a one-stop solution to this need. I am a seasoned 20 ye... Read more

NC Programmer/Tool Designer/Planner/Modeller Do you have a part that you just do not have time to plan, tool and NC program? I can provide a one-stop solution to this need. I am a seasoned 20 year Manufacturing Engineer with extensive experience in planning, cutter design/selection, NC Programming and CAD Modelling. Expert programmer in 3, 4 and 5 axis high speed machining and turning of Aluminum, Magnesium, Titanium, Steel and other materials. Proficent in CATIA V5, V4, Vericut, Excel, Word and other Microsoft Softwares.

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set.... Read more

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set. Advised design teams on application of GD&T for assembly level and component level drawings and interactions. Facilitated communication between the design teams, manufacturing vendors, and the project leader. Examined fits for complex assemblies and created tolerance analyses to prove assemblies would function in all material conditions. Checked drawings for accuracy. Lead discussions on Design for Manufacturing and Design for Assembly best practices. Advised engineering team on proper application of GD&T in both ASME and ISO standards.

Co-Owner, Vice President, and Project Manager with 12+ years of experience partnering with architects, designers, developers, and corporate clients on large-scale, multi-site projects nationwide. Stro... Read more

Co-Owner, Vice President, and Project Manager with 12+ years of experience partnering with architects, designers, developers, and corporate clients on large-scale, multi-site projects nationwide. Strong background in accessibility (ADA) surveys, plan review support with hands-on experience in AutoCAD and SketchUp. Skilled at coordinating complex project logistics, managing consultant teams, and translating field conditions into clear drawings, reports, and client-ready documentation. Known for reliability, attention to detail, and building long-term relationships with design teams and owners.

I’m an old school draftsman/designer who started out doing everything in pencil and pen on a drafting table. My 30+ year career spans the gambit from cartography and geographic information systems to... Read more

I’m an old school draftsman/designer who started out doing everything in pencil and pen on a drafting table. My 30+ year career spans the gambit from cartography and geographic information systems to furniture design (my first love) and cabinet making. I have experience in a wide variety of software from ESRI ArcMap to Solid Edge PLM software. I am eager to work with you on your design and CAD projects.

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your ne... Read more

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your needs. I am an Electrical Engineering student with experience in architecture, mechanical design, and piping. I also own EDEN Engineering Group, and my clients will have the resources of experienced designers and student engineers at their disposal.