Hire CAD designers & engineers in Hillsboro, Alabama

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimiza... Read more

Multi-discipline draftsman focused on fabrication and installation. Advanced use of 2D and 3D CAD and Solidworks to create shop/field-ready drawings, models, and wiring diagrams. Committed to optimization and thoroughness.

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufact... Read more

Mechanical engineer with over 20 years of product design and manufacturing experience. I have created hundreds of patent drawings while working for patent attorneys, individual inventors and manufacturing companies without a single rejection from the USPTO. All of my work is done in 3D using Solid works. I also do freelance product development work for individual inventors and manufacturing companies.

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involv... Read more

I am in a constant learning mode of Solidworks 3D modeling and design for 2 to 3 years now. I use this mostly for 3D printing and CNC work. It is a constant learning process that I hope I could involve and use in my life beyond hobby level. I have used this to create simple mounts for my GoPro, a couple electronics enclosures, and a more complex structure like a servo controlled robotic arm that I am currently working on and my CNC machine that was mostly 3D printed. I am currently preparing to take a test to earn the CSWA (Certified Solidworks Associate) and after completing this I plan on taking the CSWP (Certified Solidworks Professional) as well.

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years exp... Read more

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years experience in multimedia graphic design, with a Bachelor's degree. My experience allows me to have a quick turnaround and the highest quality for all my clients. I produce work in Print, Video, 3D Modeling and Animation, 2D animation, Presentations (PowerPoint and PDF), Web and other mediums. Online Portfolio: https://www.behance.net/wsfuller Walter Fuller

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

Associates Degree in Building Information Modeling from IADT, Tampa, FL. 3 Yrs Experience in the drafting/designing and material handling fields.

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundre... Read more

I am an independent consultant specializing in mechanical design and analysis of products and processes. I have worked on projects ranging is size from a single part, to thousands of parts and hundreds of sub assemblies and ranging in price for a few dollars to $1M. Additionally, I am well versed in producing photo realistic renderings of products for marketing purposes. I pride myself in providing thorough and accurate deliverables by taking the time to fully understand the challenges my clients face and how to provide the best solution possible.

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experien... Read more

I am an experienced Solidworks user with 10/yrs of advanced use. CSWA certified to use the software, I passed with a perfect score.I am also top rated here on ▒▒▒▒▒▒. With over 5 years of experience modeling executive furniture for a very well known designer on the Pacific Coast, I have become exceptionally proficient at 3D modelling from minimally detailed hand drawn illustrations. I posses a mixture of artistic creativity and knowledge of form and definition makes me the perfect candidate for the development of your 3D Product Concepts. I excel at lighting and rendering at the photo-realistic level and with an additional 10 years of graphic design experience in magazine, business card, print and promotional layout, I can give your ideas the kind of edge and presentation that will draw the eye of even the most discerning and prudent of investors. I have direct connections for rapid prototyping and injection molding through cadmodels.com, I am one of the 10 elite designers featured on the website. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒, you can email me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or reach me at 541 778 0413

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet... Read more

I'm a Mechanical CAD Designer with extensive experience in SolidWorks and AutoCAD. I've been working in the industry professionally for about 2 years now. I have prior experience in designing sheet metal components and assemblies for the Work Truck industry. Currently, I am employed through a military contractor that develops SATCOM systems for various branches of the U.S. Military.

AL Registered Interior Designer with 19 years experience 12 years experience in Kitchen/Bath/Millwork Design Experienced Space Planner Detail Oriented Create shop drawings for millwork contractors bas... Read more

AL Registered Interior Designer with 19 years experience 12 years experience in Kitchen/Bath/Millwork Design Experienced Space Planner Detail Oriented Create shop drawings for millwork contractors based on architectural drawings, including floorplans, elevations, sections, and details.

Experienced in AutoCAD through my time working as an Instrumentation and Controls Engineer at a Fortune 500 company. This included drafting panel designs, Instrument Layouts, P&IDs, and electrical sch... Read more

Experienced in AutoCAD through my time working as an Instrumentation and Controls Engineer at a Fortune 500 company. This included drafting panel designs, Instrument Layouts, P&IDs, and electrical schematics. I now work for a small Controls contractor and have gained experience developing Honeywell graphics screens for plant control operations. I gained my experience in SolidWorks while in college at an ABET accredited University. I have passed the FE exam and am currently working towards a PE license.

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-o... Read more

I am a Mechanical Engineer with experience in vehicle design, structural and thermal analysis, and Finite Element Analysis. I have designed, analysed, and manufactured composite structures from Out-of-Autoclave (VARTM, Vacuum Only) car frames to autoclave cured aerospace structures. I have extensive experience in thermal analysis of brake systems, autoclaves, ovens, and tooling.

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Mach... Read more

Jeff Peterson has 20 yeas 3D CAD experience and he started his career working in a small machine shops and factories. He graduated up through the trades. Got his degree in Vocational Education in Machine Trades after a short career teaching High School he took a position in industry as a inspector in the quality control department of an automotive seat belt company. He was promoted into engineering where he was assigned to the drafting and modeling department. From there he was promoted into a new R&D department. He came up with many new ideas and 5 were patented. And being the designer he was responsible for the product including purchasing, incoming inspection, manufacturing, testing, quality control, shipping and finally field return analysis. He furthered his career by taking a position position with an automotive supplier as a designer of plastic parts, rubber hoses, ridged steel tubes, stamped metal, plastic injection molds for Ford, Chrysler, GM, Honda, Nissan, John Deere, Caterpillar, and Navistar. Jeff is a great fit for any mechanical design, tool design, project management, new product development or process analysis because of his extensive experience in design, manufacturing, product development, machine trades, quality control, 3D modeling, drafting, print reading, design and creative imagination. Feb 2015 completed CATIA modler, Enovia and Kola training. Jeff also had an antique repair/refinish/woodworking side business so he is familiar with furniture manufacturing Manufacturing engineering, machining, 3D CAD design, Plastic part design, mold design, tool design, fixture design, gauge design, 2D drafting, medical equipment design and repair, GD&T, SPC, woodworking, automotive interior design, safety systems (seat restraints) design. Test machine design, Test design, Work instructions, time studies, operator training, quality control. Five patents for restraint component design. Worked with Ford, GM, Chrysler, Honda, Nissan, John Deere, Caterpillar, Navistar, Volvo, Seat belts, child seats, mold design, machining, tube design, hose design, glass, design, seal design, machine design, furniture design, machining . fixture design, time studies MS office, SDRC i-deas, AutoCAD Inventor, AutoCAD Mechanical Desktop, Pro-E, Siemens NX, KOLA, CATIA, Enovia, Time studies, Operator Instructions, Operator Training and Quality Control, FMEA, Kaizen, 5 why, plant layout, material handling, lean manufacturing, cell layout

Studied Industrial Design. Worked 3 years designing and building commercial and residential furniture for a small company. Currently employed at a Fortune 500 company as a Furniture/Product Engineer.

Studied Industrial Design. Worked 3 years designing and building commercial and residential furniture for a small company. Currently employed at a Fortune 500 company as a Furniture/Product Engineer.

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your ne... Read more

I have been working with CAD software for 5+ years in both 2D and 3D modeling. Having worked with a wide variety of CAD software for private and commercial clients, I feel confident I can meet your needs. I am an Electrical Engineering student with experience in architecture, mechanical design, and piping. I also own EDEN Engineering Group, and my clients will have the resources of experienced designers and student engineers at their disposal.

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set.... Read more

To promote manufacturing and designing fixtures, parts, components, and products through good design for manufacturing practices by providing related knowledge, experience, and an extensive skill set. Advised design teams on application of GD&T for assembly level and component level drawings and interactions. Facilitated communication between the design teams, manufacturing vendors, and the project leader. Examined fits for complex assemblies and created tolerance analyses to prove assemblies would function in all material conditions. Checked drawings for accuracy. Lead discussions on Design for Manufacturing and Design for Assembly best practices. Advised engineering team on proper application of GD&T in both ASME and ISO standards.

Skills: - AutoCAD - Sketchup - Revit - Canva - AdobePhotoshop - Moodboards - Space Planning I have completed several small Interior Design projects, including moodboards, AutoCAD drafting, SketchUp,... Read more

Skills: - AutoCAD - Sketchup - Revit - Canva - AdobePhotoshop - Moodboards - Space Planning I have completed several small Interior Design projects, including moodboards, AutoCAD drafting, SketchUp, and Revit. I have learned the basics of Interior Design and look forward to exercising my skills and experience.

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and redu... Read more

1. **Versatility Across Industries** – 3D modeling enables the creation of precise visual solutions for fields like architecture, film, gaming, and manufacturing, improving idea communication and reducing the need for physical prototypes. 2. **Creative Flexibility** – 3D tools allow for easy experimentation and adjustments, offering unlimited creative freedom to modify and optimize designs quickly. 3. **Increased Efficiency** – 3D software speeds up the design process by allowing real-time adjustments and error detection, reducing production costs and minimizing rework.

Passionate about merging hands-on experience with data-driven decision-making to drive efficiency and innovation in the industrial sector. Currently pursuing a Bachelor's Degree in Industrial Leadersh... Read more

Passionate about merging hands-on experience with data-driven decision-making to drive efficiency and innovation in the industrial sector. Currently pursuing a Bachelor's Degree in Industrial Leadership at Jacksonville State University, while honing data analytics skills through the Google Data Analytics Certificate program. With a solid foundation in mechanical design and years of experience maintaining and repairing complex machinery, I bring a unique blend of technical expertise and problem-solving abilities to the table. My professional journey has spanned from managing equipment in high-stress environments in the U.S. Army to ensuring quality control and safety in manufacturing settings. Through these experiences, I've developed a keen eye for detail, a commitment to safety, and a strong understanding of the importance of preventive maintenance and efficient project management. As I transition into the industrial leadership space, I am eager to leverage my technical background and newly acquired data analytics skills to optimize operations, enhance safety protocols, and contribute to data-driven decision-making processes. I am excited to connect with professionals in the industry and explore opportunities to make a meaningful impact.

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also... Read more

I’m able to utilize my engineering knowledge by applying fundamental and diversified engineering theories and concepts to achieve objectives innovatively, with versatility, and efficiency. I can also adapt and apply the many methods and techniques I’ve acquired through study, and interest, in a broad spectrum of scientific disciplines; and can organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems

We leverage Agile Development to bring innovation to New Product Development and Value Engineering. We specialize in Mechanical Design and Product Development, and have over a decade of experience in... Read more

We leverage Agile Development to bring innovation to New Product Development and Value Engineering. We specialize in Mechanical Design and Product Development, and have over a decade of experience in CAD Drafting, Product Development & Management, Manufacturing, Rapid Prototyping, Intellectual Property, Agile Development and Business Development. We have designed products for fortune 500 companies ranging from water purification systems to consumer appliances, hydraulic lift systems to conductor connectors for the Utility Industry. Our niche is mechanical design for consumer water purification/filtration systems, however our CAD, Mechanical Engineering and Business Development skills cross multiple disciplines and apply to many projects. Shoot us a message. We will review your project for free, we love exploring new ideas!

I am mechanical engineering recently graduated from the university of Vermont with 5+ years of experience in SolidWorks. Along with my CAD experience, I have worked for multiple different manufacturin... Read more

I am mechanical engineering recently graduated from the university of Vermont with 5+ years of experience in SolidWorks. Along with my CAD experience, I have worked for multiple different manufacturing industries creating 3D models and 2D drawings and have worked with machine shops to get parts made.

I have worked in the Oil & Gas industry for 11 years. Main are of expertise is Structural Design and 3d conceptual models. I work in AutoCAD 2d/3d. I am knowledgeable in residential design,civil engin... Read more

I have worked in the Oil & Gas industry for 11 years. Main are of expertise is Structural Design and 3d conceptual models. I work in AutoCAD 2d/3d. I am knowledgeable in residential design,civil engineering and surveying as well. I enjoy helping get the job done and clients satisfied.

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to comp... Read more

Mechanical Engineer based in Houston, Texas, USA with extensive experience in design and drafting. Proficient in SolidWorks with strong analytical skills, and a history of innovative solutions to complex problems.