Hire Local CAD Designers near Duluth, Georgia

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering res... Read more

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering results through hard work independently and also through collaborations will enable me to make valuable contributions to your projects and initiatives. I am confident that my technical knowledge, coupled with my passion for engineering, make me a strong candidate for your projects

Currently finishing up my Architectural Drafting Degree at Gwinnett Technical College. My specialty is AutoCad, also learning Revit. Looking primarily for freelance opportunities with the potential fo... Read more

Currently finishing up my Architectural Drafting Degree at Gwinnett Technical College. My specialty is AutoCad, also learning Revit. Looking primarily for freelance opportunities with the potential for full time.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

-Multiple products under patent that have grossed over $10 Million over the last 15 years. -Multiple products that have grossed over $1 Million in the last two years. -Multiple medical products aime... Read more

-Multiple products under patent that have grossed over $10 Million over the last 15 years. -Multiple products that have grossed over $1 Million in the last two years. -Multiple medical products aimed at improving the quality of life for patients. -Products in every major retailer in the U.S including Walmart, Lowes, Ace Hardware etc. -Large-scale heavy machinery projects for large corporations like Enterprise Rent-a-car and Thirdwave Automation. I am a manufacturing engineer with a small network of engineering associates in a variety of disciplines including Electrical, Mechanical, Mechatronics, Industrial Design, and. We have worked in large scale manufacturing environments in the Aerospace, Medical Device, and Automotive industries and developed numerous products as an independent company across various industries. We develop products via concepting, 3D modeling, 2D Geometric Dimensioning and Tolerancing, Electrical Engineering, Sourcing, Prototyping, and all aspects of Product Manufacturing Engineering (including Instruction development, continuous improvement, etc.).

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

education : master in mechanical engineering ability to injection molding, cast molding and also plastic part designing using solidworks and autodesk inventor software

education : master in mechanical engineering ability to injection molding, cast molding and also plastic part designing using solidworks and autodesk inventor software

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

Certified SolidWorks Expert and senior mechanical design engineer with extensive experience in 3D modeling, sheet metal fabrication, and manufacturing drawings. Currently serving as Senior Design Engi... Read more

Certified SolidWorks Expert and senior mechanical design engineer with extensive experience in 3D modeling, sheet metal fabrication, and manufacturing drawings. Currently serving as Senior Design Engineer, leading end-to-end mechanical design projects from concept to production. Skilled in precision engineering, design optimization, and delivering innovative, manufacturable solutions on time and on budget. Strong track record in translating complex requirements into efficient, cost-effective designs. Committed to quality, creativity, and exceeding client expectations.

Good at prototyping with quick initial designs. I have 4 years of experience in medical device industry. Graduated with a bachelor's in Biomed engineering from Memphis.

Good at prototyping with quick initial designs. I have 4 years of experience in medical device industry. Graduated with a bachelor's in Biomed engineering from Memphis.

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical... Read more

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical device, PSU, Bluetooth speaker, and so on. I provide you DFM(design for manufacturing) with knowledge on various manufacturing processes such as plastic molding, 3D printing, sheet metal design. I have hands on experience in printing using PLA, SLA 3D printers and we are also available to use local printing services for prototyping. I prefer to use Solidworks for 3D design, engineering drawing and rendering. I'm also familiar with B9 creator and Cuda software dedicated to 3D printing design. I'm ready to provide photo realistic rendering images before printing. You will be happy to work with me.

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to... Read more

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to serve the BOM and the brand.

My name is Josh Compston and I am a talented freelance autoCAD operator located in Springfield Ohio. For nearly 14 years I have been involved in the residential construction and cabinet industry. I ha... Read more

My name is Josh Compston and I am a talented freelance autoCAD operator located in Springfield Ohio. For nearly 14 years I have been involved in the residential construction and cabinet industry. I have lots of Sketchup experience producing models for quoting and selling projects. I have also drawn highly detailed commercial casework and retail fixtures for fabricators all over the United States. For more information on specific projects I have worked on please contact me. I am excited for an opportunity to discuss how I might be able to help you. Feel free contact me with any questions or concerns you may have.

Began career as drafter for Honeywell in 2011 (commercial and industrial fire protection design) Tradeshow Exhibit House Designer Very Creative Problem Solving Skills

Began career as drafter for Honeywell in 2011 (commercial and industrial fire protection design) Tradeshow Exhibit House Designer Very Creative Problem Solving Skills

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

I now have Onshape(BETA)!!! I can put my SolidWorks and Pro/E CAD skills to use!! Find me on LinkedIn!

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

Motivated self-starter with experience in freelance as well as corporate cultures. Strong attention to details, visual and mechanical. Works well with a team as well as disciplined to solo projects. L... Read more

Motivated self-starter with experience in freelance as well as corporate cultures. Strong attention to details, visual and mechanical. Works well with a team as well as disciplined to solo projects. Logical thinker with mechanical aptitude and efficient equipment operation. Hard worker with a strong work ethic and dedication to improving skills. Eager to learn as well as adapt to established routines. Dependable, flexible, and diplomatic listener with a desire to be a problem solver that exudes integrity.