Hire Local CAD Designers near Augusta, Georgia

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering res... Read more

I have honed my problem-solving abilities through several projects, and I am proficient in CAD software and adept at conducting thorough engineering analyses. Moreover, my commitment to delivering results through hard work independently and also through collaborations will enable me to make valuable contributions to your projects and initiatives. I am confident that my technical knowledge, coupled with my passion for engineering, make me a strong candidate for your projects

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and ha... Read more

I work professionally using Solidworks for Flowtrend. A company where we create aftermarket parts for the food manufacturing and processing industry. I am used to following FDA and 3A standards and have worked with manufacturers that make our parts. Autodesk inventor I have been using since a freshman in high school. I enjoy using it as hobby for 3D modeling and 3D printing. I end up making drawings for fun. This is the program I use at home and will be using. I have also used Revit in school when I took a civil engineering and architecture class. I am a mechanical engineering student.

My name is Josh Compston and I am a talented freelance autoCAD operator located in Springfield Ohio. For nearly 14 years I have been involved in the residential construction and cabinet industry. I ha... Read more

My name is Josh Compston and I am a talented freelance autoCAD operator located in Springfield Ohio. For nearly 14 years I have been involved in the residential construction and cabinet industry. I have lots of Sketchup experience producing models for quoting and selling projects. I have also drawn highly detailed commercial casework and retail fixtures for fabricators all over the United States. For more information on specific projects I have worked on please contact me. I am excited for an opportunity to discuss how I might be able to help you. Feel free contact me with any questions or concerns you may have.

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

- Capable of meeting deadlines and adapting the project to satisfy the client's desire - Most of my work consists of and high-end residential architecture or historic restoration, but I enjoy explorin... Read more

- Capable of meeting deadlines and adapting the project to satisfy the client's desire - Most of my work consists of and high-end residential architecture or historic restoration, but I enjoy exploring new fields - High proficiency in CAD, Revit, and Adobe Suite

Experienced engineering design leader with 10+ years overseeing multidisciplinary CAD, BIM, and mechanical design efforts across industrial, automation, medical, and architectural projects. Proven tra... Read more

Experienced engineering design leader with 10+ years overseeing multidisciplinary CAD, BIM, and mechanical design efforts across industrial, automation, medical, and architectural projects. Proven track record of leading complex design packages, improving workflows, mentoring designers and drafters, and delivering coordinated, constructible drawings on schedule and within standards.

A beginning 2D CAD Technician specializing in concept design. With a keen eye for detail, I excel in creating precise and visually appealing technical drawings. I like to collaborate with architects,... Read more

A beginning 2D CAD Technician specializing in concept design. With a keen eye for detail, I excel in creating precise and visually appealing technical drawings. I like to collaborate with architects, engineers, and designers. I transform complex ideas into accurate 2D representations. While my expertise lies in 2D CAD, I am eager to expand my knowledge and stay up-to-date with the latest software and design trends. My dedication, accuracy, and passion make me a valuable asset to any concept design team.

I’m Samuel Thomas, a skilled professional with a diverse skill set in design, engineering, and technology. Recently, I earned an AutoCAD certification and am completing Inventor training to further en... Read more

I’m Samuel Thomas, a skilled professional with a diverse skill set in design, engineering, and technology. Recently, I earned an AutoCAD certification and am completing Inventor training to further enhance my expertise in 2D and 3D drafting and modeling. My core strengths include: AutoCAD Expertise: Proficient in creating precise 2D and 3D drawings, layouts, and designs. Inventor Proficiency: Skilled in 3D modeling, design simulation, and creating detailed product prototypes.

I am a 3D sculptor that is diverse in various skill sets of the pipeline. My strengths lay in paying attention to detail. Accompanied by succeeding in working with clients that appreciate my communica... Read more

I am a 3D sculptor that is diverse in various skill sets of the pipeline. My strengths lay in paying attention to detail. Accompanied by succeeding in working with clients that appreciate my communication skills and my delivery. I also have a Bachelor degree in media arts and animation.

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical... Read more

As a certified CAD designer with 5+ years of experience in product design using Solidworks and other CAD software. I had opportunity to design various electronic products such as smart watch, medical device, PSU, Bluetooth speaker, and so on. I provide you DFM(design for manufacturing) with knowledge on various manufacturing processes such as plastic molding, 3D printing, sheet metal design. I have hands on experience in printing using PLA, SLA 3D printers and we are also available to use local printing services for prototyping. I prefer to use Solidworks for 3D design, engineering drawing and rendering. I'm also familiar with B9 creator and Cuda software dedicated to 3D printing design. I'm ready to provide photo realistic rendering images before printing. You will be happy to work with me.

Certified SolidWorks Expert and senior mechanical design engineer with extensive experience in 3D modeling, sheet metal fabrication, and manufacturing drawings. Currently serving as Senior Design Engi... Read more

Certified SolidWorks Expert and senior mechanical design engineer with extensive experience in 3D modeling, sheet metal fabrication, and manufacturing drawings. Currently serving as Senior Design Engineer, leading end-to-end mechanical design projects from concept to production. Skilled in precision engineering, design optimization, and delivering innovative, manufacturable solutions on time and on budget. Strong track record in translating complex requirements into efficient, cost-effective designs. Committed to quality, creativity, and exceeding client expectations.

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

I am employed as a substation designer and have a background in AutoCAD, Inventor, and Solidworks creating both electrical and physical schematics.

I am very time oriented, and project focused. I graduated with my Bachelors in Computer Animation from Full Sail University. I have been a freelance3D Artist for 3 years, and freelance Graphic Designe... Read more

I am very time oriented, and project focused. I graduated with my Bachelors in Computer Animation from Full Sail University. I have been a freelance3D Artist for 3 years, and freelance Graphic Designer as well.