Hire Design Engineer Designers in Qatar

RAMESH JAGANNATH LAKHAPATE Date: 22.12.2012 To, Personnel Manager, Dear Sir / Madam, I am a performance oriented professional with 31 years of exposure in the Water treatment and Petrochemical sectors... Read more

RAMESH JAGANNATH LAKHAPATE Date: 22.12.2012 To, Personnel Manager, Dear Sir / Madam, I am a performance oriented professional with 31 years of exposure in the Water treatment and Petrochemical sectors including 11 years of international exposure. I am a qualified Chartered Engineer (Mechanical Engg) from Institution of Engineers-Calcutta (India). I am CADWorx Plant Professional - 3D Modelling of Equipment & Isometric Generation from ImageGrafix, UAE (2009). I have undergone key professional courses like • The Layout of Piping System & Process Equipment, Howard Technology -Middle East, Abu Dhabi (2008) • Diploma in Welding & Lamination of Thermoplastics & GRP Materials, Hydro-Norway (2005) • Lead Auditor (ISO – 9000), International Register of Certified Auditors, UK (1995) I am skilled in pre-engineering & detail engineering of projects; design, selection, fabrication and installation of pipes & pipe valve supports of GRP & metal piping. I have exposure in conducting 3D modeling of piping design and fabrication; reviewing piping engineering plans & specifications for piping & equipments and conducting on-site inspections of projects. Lead Auditor for implementing and establishing ISO 9001 system procedures. Currently working as Technical Design Engineer with Qatar Vinyl Company Ltd. QSC, Qatar. I am responsible for designing new projects & modifying piping based on production requirements, construction codes and environmental restrictions; conducting 3D modelling of piping design and fabrication and reviewing piping engineering plans & specifications for piping & equipments. Prior to that, associated with Ion Exchange (India) Ltd., Mumbai, worked in several capabilities from Estimation Executive, Design Executive till Manager Design – Engineering Division. I was responsible for managing design activities within the Design Dept. during pre-engineering and detailed engineering of turnkey projects; estimating large turnkey projects; developing process design and estimation software packages. Acted as ISO 9001 system coordinator for implementing and establishing ISO system procedures. With my experience and skills, I am confident of offering significant value addition as a Senior level Management Professional in your esteemed organization. I have enclosed my resume for your perusal. I will appreciate an opportunity for an interview at your convenience. Thank you for your time and consideration. Sincerely, Ramesh Jagannath 

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bac... Read more

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bachelor of Science in Mechanical Engineering at Qatar University. Most people in the world have some goals in life. My aim in life is to become a mechanical design engineer. After I graduated high school, I became certain that I will pursue my higher education in mechanical engineering. The reason to study mechanical engineering is that, when I was in high school I was interested in Applied Math’s and physics. I like to apply theory which I studied in physics to solve real life problems. As a result, I have decided to study mechanical engineering. Moreover, I want interested to build hand-working skills in mechanical engineering. For this reason, I study at College of the North-Atlantic Qatar which is Canadian technical college. I have completed my advanced diploma in Mechanical Engineering Technology (industrial maintenance). In this diploma, I have learned a lot of industrial maintenance for example- reliable center maintenance, how the power plant system works, how to do maintenance in machinery equipment’s etc. Moreover, in final year I have learned how to build product from scratch. In my capstones project I build a hydraulic book lifting trolley. At first, I have done to research for the need of project. After that I calculated and design the model in 3-D software Catia V5. After finishing design I fabricated the project using college resources such as welding, fastening etc. These all techniques of fabrication I have learned in my diploma program. From this project I am interested to make career in design and manufacturing. After completion Diploma, I progressed towards B.Sc. Mechanical Engineering Degree completion at Qatar University. As a Mechanical Design Engineer, I have design and fabricated numerous projects, some of them highlighted below: -The aim of project is to design and simulate a solar powered water distillation system for rural communities in Somalia. The system consists of the evaporator, condenser, and storage tank for salty water, storage tank for distilled water, filter, pump and solar collector -The aim is to design a greenhouse that maintains the required climate to grow to tomatoes in hot and arid environments such as Qatar. The required climate includes the temperature, relative humidity, ventilation and carbon dioxide, lighting and thermal radiation, and so forth. The design is meant to meet the conditions at lower energy consumption and initial and operating cost so that to produce tomatoes that will be used for resale at a reasonable price and make profit. The design should also be reliable, have back-up systems, and be maintainable. Growing tomatoes and other crops in Qatar’s environment is important to increase food resources and production. -Aim of project describes computational and experimental investigation on the response of thin wall structures for energy absorption of car crash boxes. In this project, the tubes subjected to quasi-static axial loading. Many different cross-sectional structures have been studies to find optimal configuration for energy absorption. Initially, the Finite Element Analysis (FEA) model has been developed for different structures. From FEA model, Specific Energy Absorption (SEA) and Peak force has been estimated for different cross-sectional structures. To verify these performance parameters, quasi-static axial loading has been performed experimentally. Both foam-filled and without foam on different cross-sectional structures are implemented to study their effects on the performance parameters. The study used the aluminum alloy as a material to investigate the ability of using aluminum alloy in the energy absorption structures since the aluminum has lighter weight.

I am an Indonesian, DESIGN is my passion, AVIATION is what I do, and AERONAUTICS is my soul. 7 years experienced as mechanical and aeronautical design engineer can help you to get a reliable desig... Read more

I am an Indonesian, DESIGN is my passion, AVIATION is what I do, and AERONAUTICS is my soul. 7 years experienced as mechanical and aeronautical design engineer can help you to get a reliable design that compliance with DRO or design specification. Based on my academic background, research projects, and working experiences, I can offer you following services: - Technical Drawing - Product Design for 3D printing - Injection Molding Design - Technical Drawing for CNC Machine - 3D modeling and 2D drawing using SolidWorks or AutoCAD - Prototype Design for testing - RC Aircraft / UAV Design As a professional engineer, I always committed to deliver best result to my client as per requested Product Design Specification, with technically-proofed design (Design for Manufacturing, Design for Assembly) and prepossessing artistic appearance. Looking forward to work with you and create a design that will exceed your expectation! *Build a SIMPLE, SMART and STYLISH design for you*

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the compl... Read more

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the complete Electrical, Instrumentation and Control Automation systems associated with Commercial, Residential & Industrial Construction projects. Our Estimators are highly qualified field experienced Engineers with in depth knowledge in Engineering, Design, Construction (both Supervision as well as Project Management). Our estimators have extensive experience in cost estimate preparation, Tender Document preparation, Construction Engineering documents preparation and Quantity survey for small, Medium and Large scale Construction projects either, new builds, extensions, refurbishment projects. Our Estimators have successfully estimated many of construction projects around the country and overseas. Estimation services § Bid &Tender Estimates § Conceptual Estimates § Cost & Value Engineering § Cost Comparisons § MEP/ Electrical Subcontractor Bid Reviews (Scope & Price) § Material Lists § Quantity Takeoffs § Electrical Systems Cost Reduction Alternatives § Cost Estimate Database Development Engineering Services § Design, Construction & Shop drawings preparation § Design calculations preparations § Schematic drawings preparation § Review of Design, Engineering and construction documents. § Detailed scope Matrix preparations § Construction, Testing & Commissioning Method Statement Preparation. § Conceptual Design & FEED § Scope, BOQ & specifications preparation Technical Expertise § Electrical Systems (ELV, LV & MV) § Indoor & Area Lighting systems § Instrumentation Systems § Building & Industrial Automation & Process Control (PLC/SCADA/BMS & DCS) § Structured Cabling & Telecom systems § ELV systems ( Public Addressable, Fire alarm, Audio Visual etc) § Cabling & Earth works § Security & Surveillance Services ( CCTV, Access control etc)

Experienced MEP Design Engineer with 5+ Years of experience in MEP systems deign using BIM, CAD& other software

Experienced MEP Design Engineer with 5+ Years of experience in MEP systems deign using BIM, CAD& other software