Hire Autodesk Revit Designers in Philippines

I’m a Licensed Civil Engineer and BIM Specialist who thrives on transforming complex construction concepts into accurate, intelligent 3D models that bring projects to life. With expertise spanning LOD... Read more

I’m a Licensed Civil Engineer and BIM Specialist who thrives on transforming complex construction concepts into accurate, intelligent 3D models that bring projects to life. With expertise spanning LOD 200–LOD 500 BIM modeling, custom Revit family creation, and construction documentation management, I ensure every project detail is precise, coordinated, and ready for smooth execution. In my professional experience, I’ve worked on a variety of multidisciplinary projects where I led clash detection efforts, developed standardized BIM templates, and delivered IFC/RFA drawing sets that met stringent quality and compliance standards. I’m adept at collaborating with architects, engineers, and project managers to resolve design challenges early, reduce rework, and improve project timelines. My approach combines technical mastery of Autodesk Revit, AutoCAD, and Autodesk Construction Cloud with a solutions-oriented mindset. I’m passionate about using BIM not just as a modeling tool, but as a collaborative platform to drive efficiency, clarity, and innovation across the construction process. If you’re seeking someone who can bridge design intent with on-site reality while keeping quality, accuracy, and deadlines in focus, I’d be happy to connect. Specialties: BIM Modeling & Coordination | LOD 200–LOD 500 | Clash Detection | Revit Family Creation | Autodesk Construction Cloud | Civil Engineering

I am an Architectural BIM Specialist with more than 11 years of experience in architectural design, drafting, BIM modeling, and construction documentation. My main expertise is Autodesk Revit, with s... Read more

I am an Architectural BIM Specialist with more than 11 years of experience in architectural design, drafting, BIM modeling, and construction documentation. My main expertise is Autodesk Revit, with strong experience in architectural modeling, detailed construction drawings, BIM coordination, Revit families, interior fit-out, and high-rise residential and commercial projects. I can assist with projects from concept development through detailed documentation, including floor plans, elevations, sections, reflected ceiling plans, wall elevations, joinery details, schedules, and coordinated BIM models. I also have experience working with AutoCAD, SketchUp, Enscape, Navisworks, Bluebeam, BIM 360, and Autodesk Construction Cloud. I focus on producing accurate, organized, and construction-ready drawings and models while maintaining proper BIM standards and project requirements.

I am a licensed architect with professional experience in architectural drafting, construction documentation, facilities management, and technical coordination. I specialize in preparing accurate flo... Read more

I am a licensed architect with professional experience in architectural drafting, construction documentation, facilities management, and technical coordination. I specialize in preparing accurate floor plans, elevations, sections, detailing, permit drawings, and technical documents for residential, commercial, and institutional projects. My software skills include AutoCAD, Revit, ArchiCAD, SketchUp, Vray, and Lumion. I can assist clients with drafting, drawing revisions, PDF-to-CAD conversion, architectural documentation, 3D modeling, and visualization support. Through my experience in both commercial and residential projects, I have developed strong attention to detail, organization, and project coordination skills. My goal is to deliver clear, accurate, and reliable work while maintaining professional communication throughout every project.

✅ 100% Client Satisfaction ✅ Top Embedded and Firmware developer ✅ Top Hardware designer ✅ Top Software design ✅ Top Mechanical design and industrial design ✅ Top Enclosure design I'm a Certifi... Read more

✅ 100% Client Satisfaction ✅ Top Embedded and Firmware developer ✅ Top Hardware designer ✅ Top Software design ✅ Top Mechanical design and industrial design ✅ Top Enclosure design I'm a Certified Multidisciplinary Product Design Engineer with more than 10 years of hands on experience in product design, development and manufacturing support. Using SolidWorks, AutoCAD, and Autodesk Inventor, I help clients turn early ideas, sketches and existing models into practical products that can be prototyped and manufactured. I enjoy solving the details that make a design work in the real world not only making it look good on the screen. That means thinking carefully about how each part fits, how the product will be assembled, where the electronics will sit, and whether the manufacturer can produce it efficiently. Services: 1) Hardware/Electronics design (Power, Analog, Digital/High-speed and RF electronics design) 2) Precertification testing (EMI, ESD, EMC, FCC, CE, UL) 3) Firmware design С/C++ (Bare metal MCU/MPU, FreeRTOS, Zephyr RTOS, Embedded Linux, Wireless protocols, Security, Interfaces, etc) 4) Industrial and Mechanical design (Enclosure design, 3D printing, IP standards, Prepare all for injection molding, etc) 5) UX/UI design (Embedded devices with displays, Mobile and Desktop applications) 6) Software design (Android, IOS, Linux kernel and user space development) 7) Embedded Quality Assurance(QA) and testing 8) Manual verification/testing PCB/FPC, functional and unit testing of the Firmware/Software, stress testing, temperature range testing Service->Hardware design service: - Power electronics design: (PFC, Solar charging controller, chargers, high voltage control, Motor controllers DC/AC/BLDC ) - Analog electronics design: High-accuracy analog measurements, Noise filtration, Digital to analog conversion, Amplifying signal - Digital and high-speed electronics design: - Memories DDRx/LPDDRx, SDRAM, Camera and display interfaces (MIPI-DSI, MIPI-CSI, DisplayPort, etc), Data communication interfaces (QSpi, SPI, UART, I2C, FMC, I2S, USB 2/3.x, etc), ( - RF Designs: ( 50-60 GHz (Radars), 1-6 GHz (UWB, Wifi, BLE, ZigBee, GPS, NB-IoT, LTE-M/LTE, Z-Wave, etc), 13,6 MHz, 128 kHz (NFC, RFID, etc), 433 MHz (Custom protocols) Service -> Industrial and Mechanical Design Industrial concept design : I develop several suitable design ideas based on the product's size, purpose, industry, appearance and user experience. Mechanical CAD design : I create accurate 3D parts and assemblies with practical dimensions, tolerances, materials, fasteners and manufacturing details. PCB integrated enclosure design : I design the enclosure around the actual PCB, battery, buttons, display, antennas, connectors, sensors and wiring rather than treating the electronics as an afterthought. Design review and problem solving : I look for interference, weak features, poor alignment, difficult assembly, leakage risks, heat buildup, and other issues that may cause trouble during prototyping or production. Technical drawings : I prepare clear manufacturing and assembly drawings, exploded views, BOMs, and properly organized STEP, STL, DWG, DXF and PDF files. Thermal calculation and simulation : I evaluate heat sources, airflow, enclosure temperature and cooling options to help protect the electronics and maintain reliable operation. 3D printing and verification : I prepare print ready models and use prototypes to check fit, PCB placement, button movement, fastening, accessibility and complete assembly. Injection-molding preparation : I refine wall thicknesses, ribs, bosses, draft angles, fillets, parting considerations and other details needed for practical mold production. Cost and manufacturing optimization : I look for sensible ways to simplify parts, reduce material use, shorten assembly and control production costs without weakening the design. Service -> Project Support I organize the work into clear stages so you always know what is being developed and what will be delivered. I communicate directly and honestly, especially when I see a technical risk or a simpler way to solve a problem. I work comfortably with clients, electronics engineers, manufacturers and prototype shops to keep everyone aligned. I remain involved through reviews and revisions so the final files reflect both the design intent and the realities of manufacturing. Service->Firmware design С/C++: - Languages: C/C++, Assembler - Diagrams: Block, UML, Workflow, APIs - Interfaces: I2S, SAI, MIPI-DSI, MIPI-CSI, USB 2/3.x, LTDC, DDR3/DDR4/LPDDR4, I2C, SPI/QSPI, UART, CAN, Ethernet - Wireless: NB-IoT, LTE M, GPRS, GPS, LTE, UWB, WiFi, BLE, ZigBee, Z-Wave, LoRa, Thread, 6LoWPAN, Sub 1GHz, NFC (13,6 MHz), RFID 433 MHZ and 128 kHz - Protocols : MQTT, HTTP, FTP, Modbus TCP/RTU, SNMP, TCP/IP, UDP/IP, DLMS, custom protocols - Security: AES, SSL/TLS, custom algorithms

I’m a detail-oriented Architectural Designer with a Bachelor's degree in Architecture from the University of Nueva Caceres. Possesses a strong foundation in architectural design and planning, with div... Read more

I’m a detail-oriented Architectural Designer with a Bachelor's degree in Architecture from the University of Nueva Caceres. Possesses a strong foundation in architectural design and planning, with diverse experience from internships and professional roles in both local and international settings. I am proficient in BIM softwares (Revit,Archicad,Naviswork), AutoCAD, SketchUp, and rendering software, with experience in collaborative planning for residential and commercial buildings.

A passionate Architecture student at the University of Santo Tomas, specializing in creative design solutions through both manual and digital methods. Skilled in architectural drafting, design develop... Read more

A passionate Architecture student at the University of Santo Tomas, specializing in creative design solutions through both manual and digital methods. Skilled in architectural drafting, design development, and basic CAD tools including Revit, AutoCAD, and SketchUp. Experienced in producing high-quality 3D renders using Lumion and D5 Render. With a strong creative foundation and a parallel interest in photography, I bring a well-rounded artistic perspective to every architectural project.

I am a CAD/BIM professional with over 10 years of experience in architectural and structural drafting. I specialize in creating accurate, detailed, and construction-ready drawings using industry-stand... Read more

I am a CAD/BIM professional with over 10 years of experience in architectural and structural drafting. I specialize in creating accurate, detailed, and construction-ready drawings using industry-standard tools such as Autodesk Revit and AutoCAD. My expertise includes 2D drafting, 3D BIM modeling, architectural and structural documentation, and revision management for construction and design projects. I have worked on multiple large-scale projects where precision, speed, and coordination between disciplines were essential. I am experienced in handling frequent design revisions, ensuring that all updates are reflected accurately in both models and construction drawings. I also follow strict CAD standards and maintain clean, organized, and efficient project files. In addition to technical skills, I am highly detail-oriented, reliable with deadlines, and capable of working independently or in coordination with project teams. I am currently expanding my expertise in BIM workflows and improving my Japanese communication skills to support international projects. I am open to freelance opportunities involving: ·Architectural drafting (2D/3D) ·Structural modeling in Revit ·BIM modeling and documentation ·CAD conversion and detailing ·Construction drawing production My goal is to deliver high-quality CAD/BIM output that supports efficient design and construction workflows.

I am an Architecture graduate from De La Salle University–Dasmariñas with over 14 years of experience in BIM management, architectural design, and project coordination across Asia and the Middle East.... Read more

I am an Architecture graduate from De La Salle University–Dasmariñas with over 14 years of experience in BIM management, architectural design, and project coordination across Asia and the Middle East. My career spans roles in the Philippines, Malaysia, Dubai, and Saudi Arabia, where I have led BIM teams, developed modular formwork solutions, designed interiors for luxury apartments, and created specialized airport and infrastructure furniture designs. Most recently, I worked as Senior BIM and later BIM Manager at One International Group in Malaysia, overseeing the BIM execution and design coordination of Intel’s Data Center Complex in Penang while managing a remote design team from the Philippines. Previously, I contributed to luxury residential and interior fit-out projects with OCTA and DEPA Interiors in Dubai and gained additional expertise in project management, visualization, and technical design through earlier roles in engineering, consultancy, and freelance collaborations. Across all positions, I have consistently delivered precise, innovative, and well-coordinated solutions that integrate architecture, engineering, and construction.

Hi, I’m Ian, an architect with a skilled and detail-oriented CAD specialist with experience in transforming point cloud data into accurate and detailed Revit models. My expertise lies in providing hig... Read more

Hi, I’m Ian, an architect with a skilled and detail-oriented CAD specialist with experience in transforming point cloud data into accurate and detailed Revit models. My expertise lies in providing high-quality 3D modeling and BIM solutions for architectural, structural, and MEP projects. I have worked on a wide range of projects, from historical building restorations to large-scale commercial developments, helping clients bring their designs to life with precision and efficiency. My technical proficiency includes working with tools like Autodesk Revit, AutoCAD, and advanced point cloud processing software such as Recap and CloudCompare. ### Why Work with Me? - **Precision & Quality**: I pride myself on delivering highly accurate models that align with project requirements. - **Timely Delivery**: Meeting deadlines is a priority without compromising quality. - **Client Collaboration**: I maintain clear and consistent communication to ensure your vision is realized. - **Problem-Solving**: I excel at tackling complex geometries and resolving challenges in point cloud data conversion. Whether you need detailed as-built models, clash-free coordination, or custom BIM solutions, I’m here to help. Let’s work together to make your project a success! Other Skills: Adobe Photoshop Autodesk Fusion Rendering software ( Lumion, Twinmotion, Enscape, Blender ) Feel free to reach out to discuss your project needs. I’m excited to collaborate and bring your vision to life.

Experienced Civil Engineer currently with 8 years of experience in handling detailed engineering plans, work programs, bills of quantities, and structural analysis. My expertise spans wide range of pr... Read more

Experienced Civil Engineer currently with 8 years of experience in handling detailed engineering plans, work programs, bills of quantities, and structural analysis. My expertise spans wide range of projects including residential, commercial, school, warehouse and roads, ensuring that every project is delivered on time, within budget, and to the highest standards of quality. Previously worked in the Material’s Quality Control Division focusing on quality control programs and material testing. Began career as a Draftsperson at AA Matrix Construction Supplies & Engineering Services year 2016, where duties included preparing bills of materials and technical drawings.