Hire Material Handling Designers near Maharashtra, India

I have been in material handling draughting field LAY-OUT/ ASSLY/ DETAIL & “ 3D “DRGs. ,worked on packing plant for(various conveyors) cement industries, furnace industries & material handling manuf... Read more

I have been in material handling draughting field LAY-OUT/ ASSLY/ DETAIL & “ 3D “DRGs. ,worked on packing plant for(various conveyors) cement industries, furnace industries & material handling manufacturing industry. jack-up & service platforms

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the orga... Read more

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the organization, and thus leads to my professional and personal growth. STRENGTHS:  Well Regarded for inter personal, written and oral communication skill.  Can handle multiple tasks simultaneously.  Ability to acquire and apply knowledge rapidly.  Can work independently with minimal supervision and contributes to a team.  Supportive attitude.  Loyal. WORK EXPERIENCE: • Having 6 years of Experience in TOOL FIXTURE DESIGN. CURRENT WORK EXPERIENCE: • Presently Working with ONWARD TECHNOLOGIES LIMITED as a Senior Design Engineer from 29th NOV 2016 to till date. PREVIOUS WORK EXPERIENCE: • Worked with GGS ENGINEERING SOLUTIONS PVT LTD as a Design Engineer from 03rd of August 2015 To 25th November 2016(1.3 YRS) • Worked with CADTECH ENGINEERING SOLUTIONS PVT.LTD. As a CAD ENGINEER in PUNE From 09TH MARCH 2012 TO 01ST AUG 2015 (3.5 YRS) (ON SITE WORKED IN JOHN DEER INDIA PVT LTD). • Worked with LITEX ELECTRICAL PVT LTD as a PROJECT ENGINEER from 1ST AUG. 2011 to 28TH FEB 2012.(08 MONTHS) RESPONSIBILITIES IN CURRENT ORGANISATION • Concept design for welding fixtures, Assembly fixtures, Machining fixtures and Gauges for Johndeere products. • Preparing manufacturing drawing for the same. • Project Management. • Design review. • Quality check. • Simulation study for fixtures. • Check in the tools to PDM after final Review. • Leading and guiding the team members. (4 members) • Attending meetings with customer for better improvements in design. RESPONSIBILITIES IN PREVIOUS ORGANISATION (LITEX):  Receiving the work from customer.  Modeling and drafting and design of jigs and fixtures and gauges.  Submission of designs to Peer QC for final approval.  Defect Prevention and Process Improvement activity.  Software used: Pro- E wildfire 4.0 (wind chill), Auto CAD 2010.  Projects carried out:  LAMP FIXTURE & GUAGE  PRESS SEAL FIXTURE  SUPPORTING JIG AND GUAGE.  ROD WELDIND AND CUTTING FIXTURE.  DESIGNED OF CUTTING AND CRIMPING M/C  DESIGNE OF TUBE CUTTING M/C  LAMP CAP FIXTURE. • SOFTWARES USED: PRO-E WILD FIRE 4.0, AUTO CADD 2009. • OTHER TRANINING PROGRAMS:- ATTENDEND ON JOB TRAINING IN NTTF INDUSTRIES LTD. BANGALURU. DURATION: 50 DAYS. • ACTIVITIES:  KNOWING VARIOUS DEPARTMENTS & ACTIVITIES.  KNOWING PRODUCTION ACTIVITIES.  KNOWING DESIGN STANDARDS.  DETAILING OF TOOL ELEMENTS.  MODELLING AND ASSEMBLING OF PARTS. ACADEMIC DETAILS: B.TECH IN MECHANICAL ENGINEERING: Duration : 2011-2014. Institution: JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY (HYDERABAD). Result : 68.0%. POST DIPLOMA IN TOOL DESIGN: Duration : 2009-2010. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF) DHARWAD. Result : 6.98 SGPA. DIPLOMA IN TOOL AND DIE MAKING: Duration : 2005-2009. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF). Result : 65.06%. S.S.L.C: Duration : 2004-2005. Institution: CHALLAPALLI PUBLIC SCHOOL. Result : 78.0% SOFTWARE PROFICIENCY:  CREO  Pro-E – Wild fire 5.0.  Solid works.  Auto CAD 2009.  CATIA V5 (BASIC). SPECIALIZATION:  Mould Design Technology  Press Tool Design Technology  Jigs & fixtures Design  Material Technology  Geometrical Dimensioning & Tolerance. • HOBBIES:- Reading books, News paper, Internet browsing, listening music, cricket, chess. PERSONAL DETAILS: Name : P.V.B MURALI KRISHNA. Father’s Name : P.SATYANARAYANA. Date of Birth : 14/01/1990. Sex : Male. Nationality : Indian. Languages known : English, Hindi, Telugu. Marital Status : Single. Passport No : J6324202 Permanent Address : P.V.B MURALI KRISHNA. S/O P.SATYANARAYANA. GHANTASALA PALEM, GHANTASALA (M.D), KRISHNA (D.T) ANDHRAPRADESH-521133

My greatest value is time and greatest reward is a satisfied customer. So I work only if I can do the job efficiently in the shortest time. I have a bachelor’s degree in mechanical engineering and... Read more

My greatest value is time and greatest reward is a satisfied customer. So I work only if I can do the job efficiently in the shortest time. I have a bachelor’s degree in mechanical engineering and more than 1 years work experience in this area. I am Expert in SolidWorks, AutoCAD, CATIA, Creo. My specialization is to create a product from idea to reality. It includes concept design, 3d modeling, drawings, and BOMs. My job is to fulfill the requirements of your project with my technical expertise. Therefore I will EVOLVE and MATERIALIZE your concepts/ideas! I work with sheet metal, metal structures, details for mechanical machining and 3d printing. I also can do reverse engineering, chose motors and linear actuators for moving mechanisms etc. I learn quickly and I like to improve my skills. All of it with my responsibility provide success of my projects. AutoCAD ( Drafting)- advanced level SolidWorks (2D Drafting, 3D modeling part, assembly) - advanced level Catia V5 (2D Drafting, 3D modeling, assembly) - medium level Creo Parametric (2D Drafting, 3D modeling, sheet metal, solid, assembly)- medium level ANSYS 18.1 (structural analysis, modal analysis) - medium level Some of the Services I Offer : Mechanical Design Detailing (Parts, Assemblies, Exploded views & Bill of Materials) Pneumatic / Hydraulic circuit design Finite Element Analysis Fixture and work holding design Material handling & Lift-assist design Process layout & Design Fabrication and Assembly Support My specialties are: + Design Thinking + 2D & 3D Modelling (Computer Aided Design) + Finite Element Analysis (FEA) + Prototyping and Manufacturing Techniques +3D Printing Technologies For more information regarding my specialties. Please do not hesitate to contact me.

I wish to put forward my candidature for the Mechanical Engineering..I am an energetic and hard worker who enjoys the challenges involved in working with people and resolving problems. I believe that... Read more

I wish to put forward my candidature for the Mechanical Engineering..I am an energetic and hard worker who enjoys the challenges involved in working with people and resolving problems. I believe that my knowledge and initiative are positive assets which will help me in handling my responsibilities. With more than 4 years' experience as a Mechanical Design Engineer in Conveyors, Material Handling & SPM, my job experience has afforded me a well-rounded skill set, including first-rate analytical and critical thinking skills, I excel at: Project management Cost estimating Mechanical design In addition to my experience and personal qualities, I have a solid educational foundation and a passion for engineering and mechanical designing. Please review my attached resume for additional details regarding my expertise and abilities. I will follow up to request an appointment to discuss how my experience and background meets your needs. Thank you for your time and consideration. Your Sincerely, Jayanta Das.

We are the working peoples working in Designing of Material Handling Equipments, Automation Systems, Sheet-metal Control Panels , Hydraulic Press, Pneumatic Systems, Worktables etc. All above designi... Read more

We are the working peoples working in Designing of Material Handling Equipments, Automation Systems, Sheet-metal Control Panels , Hydraulic Press, Pneumatic Systems, Worktables etc. All above designing is done in 3D softwares like Solid-Works , Unigraphics & Solid-edge. We are proficient in all these softwares. As per customers requirement we are able to give all Designing, Detailing, Drafting and Manufacturing Drawings within specified time and date in any software. Manufacturing drawings are done as per all Manufacturing standards with proper GD&T, Surface treatments, Hardening Processes, Material selection etc within specified Date & Time. We want to work with your organisation. Pls if you have any type of work expecting from india then we are the peoples are ready to work with you at very reasonable cost. On Hourly Basis we charge Rs 450/hr (nearly $7/hr). Pls give us a chance to work with you.

Projects: 1. Experimental Comparison and Performance Analysis for Hydrodynamic Journal Bearing using various Viscous Fluids. Hydrodynamic Journal Bearing commonly used in large turbines, generators,... Read more

Projects: 1. Experimental Comparison and Performance Analysis for Hydrodynamic Journal Bearing using various Viscous Fluids. Hydrodynamic Journal Bearing commonly used in large turbines, generators, compressors, gearboxes and pumps in the power generation and oil, gas and chemical processing industries. Oil is the main component of bearing which sustain pressure as well as temperature of bearings. This test rig analyze different oils for given temperature and pressure and provide optimum results. This test rig improves the life of bearing and reduces cost by comparing and analyzing different fluids. Software used: Pro-E, Matlab 2. Wet cloth twister: It’s difficult for old and physically weak peoples to twist clothes. This products reduces twisting efforts and muscle pain. Software used: Unigraphics Nx 3. I Card Pin clamping fixture for riveting machine. It’s very difficult to insert spring and pin mechanism in I card pin manually. The spring and pin inserted by arrangement of toggle clamp mechanism and fixture. Software used: Solid Edge 4. Electric Tri-cycle with Gear Transmission. This Electric Tri-cycle basically use for public transportation, material handling in industry. Electrical Tri-cycle operated both mechanically and electrically. This tri-cycle contribute major role in reducing pollution. Technologies used: BLDC motor, Gear Transmission Mechanism.

I am a Mechanical Design Engineer with the experience in Designing and Developing the heavy macinery & Material handling equipments. Good hands on Autocad & Invenor.

I am a Mechanical Design Engineer with the experience in Designing and Developing the heavy macinery & Material handling equipments. Good hands on Autocad & Invenor.

I have 10 years of work experience in Machine design, Material handling equipment, Tools and fixture design. I have experience in all stages of product design i.e. from concept design, Detail design a... Read more

I have 10 years of work experience in Machine design, Material handling equipment, Tools and fixture design. I have experience in all stages of product design i.e. from concept design, Detail design and drafting, Manufacturing of product, GD&T, Assembly and installation of machine. I have excellent knowledge of project management, Design calculations, CAD modelling using softwares like Creo, Solidworks ,Catia V5 and V6, Also team handling. I have used all types of harddwares and bought out parts in my design such as bearings, plummer block, LM rails, ball screw,gear boxes, Gear motors, Servo and stepper motor, Standard items such as C-channels, Tubes, pipes, L angles, I sections. I am Very good at concept generation, preparation of manufacturing drawing, Assembly of components, pnuematics and hydraulics etc. I have also experience in Analysis of structure using ansys softwares.

Having 7+ Experience in Design. My expertise is in Special Purpose Machines, New Product Development, Packaging Machine Design, Material Handling Systems etc.

Having 7+ Experience in Design. My expertise is in Special Purpose Machines, New Product Development, Packaging Machine Design, Material Handling Systems etc.

Exepertise into designing of mechanical systems for material handling and automation, Expertise in conveyor designs, 2D-3D conversion, Modelling and drafting, Part and assembly modelling, Design check... Read more

Exepertise into designing of mechanical systems for material handling and automation, Expertise in conveyor designs, 2D-3D conversion, Modelling and drafting, Part and assembly modelling, Design checks, MS-office work

1. Machine Design & Engineering Professional 2. Experienced professional in Creo Parametric, AutoCAD, CATIA & SolidWorks 3. 3+ Years of experience in design of material handling & Automation equipment... Read more

1. Machine Design & Engineering Professional 2. Experienced professional in Creo Parametric, AutoCAD, CATIA & SolidWorks 3. 3+ Years of experience in design of material handling & Automation equipment, SPM Design, Product design.

• Having 8 Years of experience as a Mechanical Design Engineer, and willing to learn and explore more in this vertical. • Currently associated with Konecranes and Demag Private Limited for the past 4... Read more

• Having 8 Years of experience as a Mechanical Design Engineer, and willing to learn and explore more in this vertical. • Currently associated with Konecranes and Demag Private Limited for the past 4 years. • Extensive knowledge of designing of heavy material handling types of equipment & heavy fabricated steel structures. • I can make material handling machinery as per customer’s requirement, with design calculations at every step of the projects. • Engineering book problems solving • Engineering or technical assignments • Product manual preparation.

1.Material Handling Equipment's 2. Grain Unloading & Milling Section Design Layout, Flour Plan, Civil Load Data, Fabrication Drawing. 3. SPM Design. 4. Structure Design & Analysis with Analysis Report... Read more

1.Material Handling Equipment's 2. Grain Unloading & Milling Section Design Layout, Flour Plan, Civil Load Data, Fabrication Drawing. 3. SPM Design. 4. Structure Design & Analysis with Analysis Report.

I am 3D CAD designer with passion for Machine design. I have worked on various projects for both startups and established companies, focusing mostly on machine/system conceptualization, 3D modelling,... Read more

I am 3D CAD designer with passion for Machine design. I have worked on various projects for both startups and established companies, focusing mostly on machine/system conceptualization, 3D modelling, detailed engineering and drafting. I have worked on various projects, broadly including (but not limited to) 3D modelling of Welding automation, material handling systems, conveyors, induction heating systems and many more. I prefer to use Autodesk Inventor, but I am also proficient user of AutoCAD and Solidworks. With my extensive experience in these fields, I can deliver the required 3D models, AutoCAD drawings very efficiently with precision.

Industrial Experience on Fabrication, Weldment, SPM, Casting, Material Handling and Industrial Automation.

Industrial Experience on Fabrication, Weldment, SPM, Casting, Material Handling and Industrial Automation.

I HAVE AN EXOEREINCE IN DESIGN AND DEVELOPMENT IN MINING AND QUARRY EQUIPMENT FOR 3 YEAR

I HAVE AN EXOEREINCE IN DESIGN AND DEVELOPMENT IN MINING AND QUARRY EQUIPMENT FOR 3 YEAR