Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

With a knack for out of the box thinking and radical thinking! Have a good experience with Solidworks and Fusion360. Finding solutions for real time problems.

With a knack for out of the box thinking and radical thinking! Have a good experience with Solidworks and Fusion360. Finding solutions for real time problems.

myself.Ranjith.j from chennai im a student and a innovative designer with the background of bachelors in mechanical engineering

myself.Ranjith.j from chennai im a student and a innovative designer with the background of bachelors in mechanical engineering

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

Mechanical Design Engineer (Freelancer) | Product Design | NPD | Sheetmetal | Reverse Engineering | Scan to BIM | DFM&DFA | GD&T| 2D Drawings | Drawing Review | Tolerance Stack up | Autodesk Inventor... Read more

Mechanical Design Engineer (Freelancer) | Product Design | NPD | Sheetmetal | Reverse Engineering | Scan to BIM | DFM&DFA | GD&T| 2D Drawings | Drawing Review | Tolerance Stack up | Autodesk Inventor | AutoCAD | SolidWorks Strengths and Skill Sets: 01.Technical Proficiency: Over 10+ years of experience in mechanical design using Autodesk Inventor, AutoCAD, AutoCAD Plant 3D, Autodesk Revit, Navisworks, and Autodesk ReCap. 02.Scan-to-BIM Expertise: Skilled in reverse engineering and Scan-to-BIM workflows, including processing point cloud data, modeling ducting systems, and coordinating multidisciplinary models. 03.3D Modeling and 2D Drawing: Expertise in creating engineering drawings, top-level assemblies, and detailed part drawings with GD&T standards. 04.Industry Knowledge: In-depth understanding of renewable energy components, wastewater treatment systems, mining equipment, pharmaceutical facilities, and heavy engineering fabrication. 05.Project Management: Skilled in client collaboration and oversight of piping and mechanical design activities across all project phases. Key Accomplishments: 01.Successfully designed 3D piping arrangements and isometric drawings for renewable energy plants at Metzuyan Technologies, ensuring full compliance with P&ID specifications. 02.Led the development of skid designs and detailed piping layouts for wastewater treatment systems at L&T Technology Services, improving design accuracy and project efficiency. 03.Conducted stress analysis and developed comprehensive GA and P&ID drawings for mineral extraction equipment at Tenova India, meeting stringent client process and safety requirements. 04.Executed Scan-to-BIM projects in the pharmaceutical industry, using Autodesk ReCap to process point cloud data and Autodesk Revit to model HVAC ducting systems, with model coordination and clash detection performed in Navisworks.

7+ years of expertise in the Oil & Gas and Petrochemical sectors. I specialize in designing Pressure vessels, Tanks and Static Equipment using ASME, API, and EN standards. My background includes leadi... Read more

7+ years of expertise in the Oil & Gas and Petrochemical sectors. I specialize in designing Pressure vessels, Tanks and Static Equipment using ASME, API, and EN standards. My background includes leading 3D/2D CAD modeling, fabrication reviews, and risk assessments for LNG and refining projects. I have successfully delivered complex engineering solutions for Flowserve Corporation, Gpi Tanks and Process Equipment, Lamb Weston, McCain, Cargill, Kiremko, etc.

I enjoy experiment with different ideas to visualization on 3d cad . Proficient in utilizing siemens nx, autocad, ug nx

I enjoy experiment with different ideas to visualization on 3d cad . Proficient in utilizing siemens nx, autocad, ug nx

Hi, I have a total of 18+ years of drafting experience, including the last 8 years working remotely with Livers Bronze LLC, Kansas City, USA. During the last 8 years, I have completed 800+ commercial... Read more

Hi, I have a total of 18+ years of drafting experience, including the last 8 years working remotely with Livers Bronze LLC, Kansas City, USA. During the last 8 years, I have completed 800+ commercial railing projects, including approval drawings and final fabrication drawings for more than 15 types of railing systems. I have strong experience in: • Glass railing systems • Cable railing systems • Panel railing systems • Stair and balcony railings • Shop drawings • Fabrication drawings • Installation drawings • Glass manufacturing drawings • Post and stub manufacturing drawings • Cable manufacturing drawings • Trim manufacturing drawings • Panel manufacturing drawings • 1-line post manufacturing drawings • LED integrated railing systems • Architectural and structural detailing I also prepare drawings with proper AutoCAD standards including: • Organized layers • Proper text styles • Dimension styles • Dynamic blocks and standard blocks • Clear annotations and callouts • Fabrication and installation details • Professional sheet layouts I specialize in preparing accurate, detailed, and fabrication-ready drawings based on US standards for commercial and residential projects. I can provide plan views, elevations, sections, layout sheets, connection details, and production-ready manufacturing drawings for fabrication and installation purposes.

I will create accurate 3D CAD models & technical drawings (CATIA V5 /SIEMENES NX). Deliverables: STEP, IGES, STL, DWG, PDF. Please send sketch, dimensions, and file format before order.(JIG&FIXTURE,SH... Read more

I will create accurate 3D CAD models & technical drawings (CATIA V5 /SIEMENES NX). Deliverables: STEP, IGES, STL, DWG, PDF. Please send sketch, dimensions, and file format before order.(JIG&FIXTURE,SHEET MATAL,PRESS TOOLS,SURFACE MODELLING,SPM)

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have... Read more

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have on-hands experience with this field of science.

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

Hardworker with good interpersonal skills and creative ability. Done Several projects under Solidworks and Autocad. Will satisfy your needs effectively in an efficient way.

Hardworker with good interpersonal skills and creative ability. Done Several projects under Solidworks and Autocad. Will satisfy your needs effectively in an efficient way.

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. *... Read more

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. * 3D mechanical designing and detailing.

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet m... Read more

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet metal design, Cad design using creo and many more sensors are used like IR sensor etc. My education - B.E - Mechanical Engineering in First Class at 2018 my Family is very poor. but my design idea and innovation is rich.

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I... Read more

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I have experience in concept development, technical drafting, and Standard Work Instructions (SWI). I have worked on precision tooling solutions for automotive, aerospace, and manufacturing industries, ensuring high-quality and production-ready designs. Whether it's converting 2D drawings to 3D models, creating complex assemblies, or optimizing designs for manufacturing, I deliver efficient and accurate solutions. Let’s collaborate on your next project!

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup upda... Read more

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup updates. I did several projects for Water treatment plants, Flour mills, power plants. INTERIOR Designer : Space Planning, Color Schemes, Materials, Furniture and Decor ideas. I dis several designs for home interior, furniture and wood works on special needs.

Having 6 years of experience in manufacture industries as a Machine designer. Having high depth knowledge in Automation machine and special purpose machines

Having 6 years of experience in manufacture industries as a Machine designer. Having high depth knowledge in Automation machine and special purpose machines

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert an... Read more

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert and if you need services like mentioned above, I'll be right choice for you. I can design different mechanical parts, fixtures and instruments in Autocad. Services: I am offering • 2d drawings • CAD 3d modeling. • isometric 2d CAD drawings • 3d product designing. • mechanical parts designs. • high realistic rendering. I will provide dwg, dxf, jpg, png, pdf file formats. Why choose me: • 100% money back guarantee. • I will provide fast delivery service.

i have completed diploma in mechanical engineering and i have more than 6 years experience in mechanical field, i was 4 years of working in design field which i using this software PTC Creo parametri... Read more

i have completed diploma in mechanical engineering and i have more than 6 years experience in mechanical field, i was 4 years of working in design field which i using this software PTC Creo parametric, solid works, Autocad

Proven expertise in Product design with knowledge in surface and solid modelling softwares like AutoCAD , Creo , CATIA, Solid works, Ansys and Experience in Value analysis and Value Engineering driv... Read more

Proven expertise in Product design with knowledge in surface and solid modelling softwares like AutoCAD , Creo , CATIA, Solid works, Ansys and Experience in Value analysis and Value Engineering driving Cost focus from design stage of a product.

With over 2.0 years of experience as a Mechanical Design Engineer, I specialize in CAD design, product development, and prototyping. I've been instrumental in designing mechanical components for vario... Read more

With over 2.0 years of experience as a Mechanical Design Engineer, I specialize in CAD design, product development, and prototyping. I've been instrumental in designing mechanical components for various products, ensuring functionality and manufacturability. My passion for sustainable design and innovation drives my commitment to excellence in the field of mechanical engineering.

Advanced CAD Modelling : Expert in SolidWorks, Creo, AutoCAD, and Cad Query for precision design, prototyping, and CNC-ready outputs across industrial, HVAC, and furniture domains. Cross-Industry Expe... Read more

Advanced CAD Modelling : Expert in SolidWorks, Creo, AutoCAD, and Cad Query for precision design, prototyping, and CNC-ready outputs across industrial, HVAC, and furniture domains. Cross-Industry Experience: Proven success designing wind turbine components, flameproof enclosures (ATEX), HVAC layouts, and modular furniture systems—bridging field feedback with manufacturable solutions. Manufacturing-Ready Documentation: Delivering detailed quotation drawings, BOMs, and production instructions aligned with DFM/DFA and GD&T standards. Reverse Engineering & Design Optimization: Skilled in analysing legacy components and field reports to create improved, cost-effective designs with enhanced reliability. Client-Focused Collaboration: Strong communicator with experience in client coordination, proposal writing, and delivering tailored solutions that meet technical and aesthetic goals. Freelance Flexibility: Available for short-term design sprints, long-term product development, and technical branding support adapting quickly to diverse project scopes. Furniture & Industrial Design: Specialized in modular furniture CAD, ergonomic layouts, and scalable design systems for both residential and commercial applications.

Product Design experience in 2D and 3D design, Manufacturing, and visualizing, with 8+ years of exceptional technical experience. My specialization is Product Design, Engineering, Illustration, Line... Read more

Product Design experience in 2D and 3D design, Manufacturing, and visualizing, with 8+ years of exceptional technical experience. My specialization is Product Design, Engineering, Illustration, Line Drawing, 2D Technical Drawing, Concept product design