Hire Instrumentation Designers in India

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

Mechanical Engineer with 3 years of hands-on experience in mechanical design, sensor development, structural health monitoring, and advanced instrumentation. Adept in CAD modeling, simulation, testing... Read more

Mechanical Engineer with 3 years of hands-on experience in mechanical design, sensor development, structural health monitoring, and advanced instrumentation. Adept in CAD modeling, simulation, testing, and fabrication with a strong research background. Seeking to contribute to a dynamic organization where engineering expertise, innovation, and interdisciplinary collaboration can drive impactful solutions.

Great exposure on AUTOCAD 2D AND 3D. Experience on solidworks part and surface modelling . Experience on brake design for automobile industry. Piping and instrumentation design of PSA based oxygen... Read more

Great exposure on AUTOCAD 2D AND 3D. Experience on solidworks part and surface modelling . Experience on brake design for automobile industry. Piping and instrumentation design of PSA based oxygen , air dryer and bio gas plants .

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

I deliver complete electronic products — from schematic and PCB design through firmware development and cloud integration. With 7 years of experience in industrial embedded systems, I have delivered p... Read more

I deliver complete electronic products — from schematic and PCB design through firmware development and cloud integration. With 7 years of experience in industrial embedded systems, I have delivered production-ready hardware for IoT monitoring, motor and machine control, EV instrumentation, and protocol conversion applications, using Altium Designer for PCB layout and Embedded C/C++ on STM32 and ESP32 platforms. What I bring to your project: End-to-end delivery: schematic design → PCB layout → firmware development → testing → production-ready Gerber files Real-time firmware development (FreeRTOS) and industrial communication protocols (CAN, RS485, MQTT, I2C, SPI) IoT and cloud integration (AWS IoT, OTA updates) for connected product requirements Power electronics design, including DC-DC and AC-DC converters Clear communication and reliable delivery timelines — currently leading embedded controller development at a major industrial equipment manufacture

Design Engineer with over 10 years of experience in detail engineering and design for Oil & Gas, Water Treatment, Chemical, and Industrial projects under EPC & EPCM environments. Strong expertise in p... Read more

Design Engineer with over 10 years of experience in detail engineering and design for Oil & Gas, Water Treatment, Chemical, and Industrial projects under EPC & EPCM environments. Strong expertise in process layout, piping design, equipment modeling, and multidisciplinary coordination. Proven ability to deliver high-quality 2D & 3D design outputs in compliance with international codes, project specifications, and client standards. Responsible for concept, basic, and detailed engineering activities Preparation and review of GA drawings, layouts, piping isometrics, and fabrication drawings Development and maintenance of 3D models using industry-standard software Clash detection, model validation, and design optimization Coordination with process, mechanical, electrical, instrumentation, and civil teams Review of vendor drawings and integration into the overall model Preparation of BOM, MTO, and material take-offs Compliance with ASME, API, ISO, IS, and project-specific standards Supporting construction teams during site execution and as-built updates

Being Manufacturing Engineer I worked in Manufacturing companies(Gear Manufacturing,Cold Forging and Pump Manufacturing companies) as Design Engineer.I have experience in design and detailing of co... Read more

Being Manufacturing Engineer I worked in Manufacturing companies(Gear Manufacturing,Cold Forging and Pump Manufacturing companies) as Design Engineer.I have experience in design and detailing of components ,casings, baseplates and Piping& Instrumentation Drawings.I will offer better service in design and detailing of Mechanical Drawing as per standard with better quality .I have a sound knowledge in AutoCAD and Solid Works softwares.I have 4 years experience in AutoCAD.

Instrumentation & Control professional with 17+ years of experience in Oil & Gas, Petrochemical, and Industrial projects, supporting FEED, EPC, EPCM, and brownfield modernization programs across upstr... Read more

Instrumentation & Control professional with 17+ years of experience in Oil & Gas, Petrochemical, and Industrial projects, supporting FEED, EPC, EPCM, and brownfield modernization programs across upstream, midstream, and downstream facilities. Experienced in PACO engineering, automation system integration, and instrumentation design, including preparation and review of engineering deliverables such as instrument layouts, cable routing drawings, loop diagrams, hook-ups, junction box wiring diagrams, control narratives, Cause & Effect (C&E) diagrams, alarm and trip schedules, and system interface documentation in accordance with international standards and project specifications. Proven track record of delivering engineering solutions for major operators including QatarEnergy, Saudi Aramco, BAPCO, and Qatar Shell GTL, supporting complex automation upgrades, safety system implementations, and reliability improvement projects while ensuring compliance with company standards, international codes, and operational safety requirements. Experienced in instrument and control system design validation, vendor package integration, field instrumentation selection, and automation architecture development, supporting multidisciplinary engineering teams from concept and FEED through detailed engineering, construction support, and commissioning. Focused on providing technically sound, practical, and standards-compliant engineering solutions that enhance process safety, automation reliability, and operational performance in complex oil and gas facilities.

As a seasoned Instrumentation Engineer with 6 years of hands-on experience, I specialize in delivering comprehensive P&ID design, instrument list creation, JB terminal diagram development, circuit dia... Read more

As a seasoned Instrumentation Engineer with 6 years of hands-on experience, I specialize in delivering comprehensive P&ID design, instrument list creation, JB terminal diagram development, circuit diagram design, instrument datasheet preparation, and BOM generation services. My expertise lies in: P&ID Design: Creating detailed P&IDs that accurately represent the process flow, instrumentation, and control systems. Instrument List: Developing comprehensive instrument lists that include specifications, tags, and locations. JB Terminal Diagram: Designing JB terminal diagrams for efficient wiring and termination. Circuit Diagram: Developing electrical circuit diagrams for instrumentation and control systems. Instrument Datasheet: Preparing detailed instrument datasheets with technical specifications. BOM: Generating accurate Bills of Materials (BOMs) for instrumentation and control components. I am proficient in [list of relevant software tools, e.g., AutoCAD, Visio, EPLAN, etc.] and can adapt to various industry standards and project requirements. My commitment to quality, attention to detail, and effective communication ensures that I deliver high-quality deliverables on time and within budget. Let's collaborate to bring your instrumentation projects to life!

A forward focused professional with12 years of experience in domains related to Mechanical Engineering with skills in planning, scheduling, conducting and rotating equipment assignments requiring judg... Read more

A forward focused professional with12 years of experience in domains related to Mechanical Engineering with skills in planning, scheduling, conducting and rotating equipment assignments requiring judgment, independent evaluation and deviation from standard techniques. Proven track record of executing and accomplishing a project for Tata Steel by working in Metal Recovery Plant with for Ferrochrome slag material recovery. Worked for product of Horizontal Belt Filters, providing the technical expertise to assist in achieving accuracy in project piping and instrumentation drawings. Extensive experience in the preparation of 3D modelling , fabrication & standardize drawings by using Autodesk Inventor for the products of Bulk Material Handling Projects , Jigging Plant for Recovery of Metal , Flocculants System , Horizontal Belt Filters . A visionary thinker with expertise in formulating and bench marking functional best practices, competency profiling and mapping processes to focus on development of capabilities to meet goals set by the organization

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and So... Read more

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and Software developments, Commercial Interior / Exterior Lighting product design and manufacturing. We possess following technical domain expertise. · Multi layer PCB Design and development · Flexible PCB Design for Wearable electronics · Customize boards for GPS, Time of Flight (ToF) sensors. · Customize boards for Langmuir Probe biasing, Ramp Generator,Pulse power circuits. · Customize high speed ADC boards for various scientific experiments · Customize Data Logger and Data Acquisition system. · Embedded Software/Hardware system development for an application area like Robotics, Instrumentation,Automation and Aviation. · Fiber Optic based data links for analog and digital signal for instrumentation · Customized micro controller like AVR,Cortex,PIC, based development board design · Circuit design and development of various applications for accurate measurement of time/frequency/pulses. · Customized Embedded Software, Circuit designs and development for various sensors like temperature (RTD/TC), ultrasonic, capacitive, acoustic, optical,ToF etc. · Customized Embedded Software, Circuit designs and development for IMU sensor's Magnetometer, Gyroscope , Accelerometer etc. · Power supply design like Linear or SMPS (buck/boost) etc. · Analog and Digital Circuits design and development · Wearable electronics product design · LED Lights and Driver circuit design · Wireless/ RF circuits design · Electronic Component Supplier

CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:▒▒▒▒▒▒▒▒▒▒▒▒▒ E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providin... Read more

CURRICULAM VITAE VIJAYAGOPAL. P Civil & Structural CADD Engineer. ?:▒▒▒▒▒▒▒▒▒▒▒▒▒ E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ To put myself in a globally reputed organization which motivates me by providing excellent opportunities and suitable environment where, I can apply my knowledge and skills, and to be a valuable asset in organization I work with to yield - both benefits of the job satisfaction as well as a steady-paced professional growth. PROFILE SUMMARY • A result oriented professional with more than 12.00 years of experience in complex structural drawings and detailing as well as on-site construction activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output • Adroit at swiftly ramping-up projects with competent cross-functional skills and ensuring on time deliverables • Acquired extensive experience of: • RCC Structures including preparation of Framing Layouts/General arrangement drawings, As-built drawings • Detailed Drawings For Raft Foundation, Columns, Beams, Slabs, Retaining Walls, Diaphragm Walls, Piles, Pile Caps, and Details Of Precast Columns, Precast Panels, Precast Slabs, Beams, Geotechnical Instrumentation Drawings & Calculation And Quantity Of Steels for reinforced Concrete and Bar Bending Schedule • Execute all type of R.C.C Drawings, mainly structural & various types of works, such as include drafting, checking, & preparing bar bending schedule with steel quantity using Base Of AutoCAD 2000 – 20016. EMPLOYMENT HISTORY Sr. CADD Engineer (Structures) September 2014 – August 2016 ArRiyadh New Mobility, CWG Group (Salini Impregilo, L&T & Nesma) at Riyadh. Project: ArRiyadh New Mobility (ANM) has been awarded a contract to design and build Line 3 which is the longest line at 41.2 km. Line 3 features 22 stations, including the Main Stations “Qasr Al-Hokm” and “Western”, 10.4 km of Bored and mined tunnel and 26.7 km of viaduct with maintenance depots at the west and east extremities. Client: ArRiyadh Development Authority (ADA) Responsabilités: • Preparation/review of span arrangement drawings for viaduct of various locations considering all aspects of site requirements for Line – 3. • Preparation of fabrication detail of Rebar jig for central pier segment of Continuous Span. Fabrication detailing of Rebar jig of center segment and expansion joint segment of Station Span. • Preparation of Erection scheme of launching girder for Straight and Curved spans. • Preparation of Bearing Installation & Bearing Pockets for all Spans. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global execution co-ordinates for all piers and spans (segments of box girder). • Preparation of Footing & Pier coordinates for Site and giving global co-ordinates for all piers and spans. • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. Sr. CAD Engineer (Structures) July 2011 – September 2014 PARSONS BRINCKERHOFF INDIA PVT.LTD, CHENNAI & HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Chennai Metro Rail Client : GAMMON - MOSMETROSTROY JV Responsabilités: • Chennai Metro Rail Limited – CMRL UAA – 02 & UAA – 03 (Corridor – 2) Projects Consisting the Railway stations from Saidapet to Government Estate. • Worked on Detailed Design of Chennai Metro Rail Project Corridor-2. Responsable for the Preparations detailed structural drawings for entities of the underground stations like tunnel Drawings Diaphragm wall drawings and sections. Preparation of D-wall Reinforcement details and also concourse Slab, roof Reinforcement Detail Drawings and also my Process involves in preparing the project related Drawings with the specifications given by the Design team and developing drawings for the client. Responsabilités: • Preparation of span arrangements drawings for viaduct of various locations considering all aspects of site requirements for Corridor - 1 (Miyapur P.O.B to L.B Nagar P.O.E). • Preparation of numeration drawing for substructure and superstructure for viaduct and Station. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation for all type of Reinforcement drawings for substructure and superstructure for viaduct and Station. • Preparation of numeration drawing for substructure and superstructure for Cantilever Pier, Portal Pier and Obligatory Span Viaduct. Numeration including Plan, Elevation and Sections and Post Tensioning Details at Various Points. • Preparation of casting coordinates of segmental Box Girder for Casting yard purpose and giving global co-ordinates for all piers and spans (segments of box girder). • Preparation of Reinforcement drawings for Prestressed Concrete (PSC) Superstructure like segmental Box girders and substructure drawings of piers, pier caps, footing and Piles and pile caps. • Specialized In Cable Profiling Of Prestressed Box-Type Girders As Directed By Design Engineer. • Preparation of Bar Bending Schedules and Calculation of Quantities As Directed By Design Team. • Preparation of Pier Schedule for Viaduct and Station Piers. Co-Ordinates for Viaduct and Station Piers Foundation, Pedestal, Pier, Pier Cap & Bearing Pedestal. • Preparation of Seismic Arrestor for Viaduct and Station Piers. Details of Bearing Pedestal Numeration Details Viaduct and Stations. • Preparation of Shear Key Details for Superstructure for Viaduct and Station Piers. • CAD ENGINEER (Alignment) January 2011 – June 2011 FEEDBACK INFRASTRUCTURES Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (Rail & Transit) Project : Hyderabad Metro Rail Limited, Client : L&T Metro Rail Ltd Responsabilités: • Assist Alignment Expert in design of Track Alignment (Horizontal & Vertical) for 3 Corridors (Total 72 kms) of Hyderabad metro Project using Bentley Rail Track and AutoCAD. • Drafting of Alignment 3 Corridors of Hyderabad metro Project based on design of Horizontal & Vertical. • Preparation of Cross Sections for all 3 Corridors of Hyderabad Metro Rail Project. • Assist in fixing of Turnouts and Crossovers along the proposed Corridors of Hyderabad Metro Rail Project. • Preparation of Power Supply Scheme Drawings for Hyderabad Metro Rail Project. • Designing / Preparation of Track Layout Plans for 3 Railway Depot Layouts of Hyderabad Metro Rail Project. • Setting of drafting standard and specifications for Hyderabad Metro Rail Project • Preparing the project related drawings with the specifications given by the Design team and developing drawings for the client. CADD Engineer (Bridge Structures) January 2010 – December 2010 EGIS INDIA CONSULTING ENGINEERS Pvt. Ltd, HYDERABAD. Position: Engineering Consultant (National Highways and Rail & Transit) Project : Chennai – Bangalore to Chennai Expressway Client – National Highway Authority of India Responsibilities: Preparation of GAD’s, which includes plans and sections of the structures, Highway Alignment, Strip Plans, Layouts, Reinforcement drawings as specified by the Design team. And also my Process involves in preparing the project related drawings with the specifications given by the Design team and developing drawings for the Client. Preparation of traffic engineering drawings as directed by design team. Civil Draughtsman (Building Structures) December 2007 – December2009 SAR PRO CONSULTING ENGINEERS, BANGALORE. Position : Engineering Consultant (Residential Apartment, Commercial complexes, Colleges & Industrial Buildings) Scope of Work : 2- 5 Floors Apartment, 2- Industrial Buildings, and 3-Engineering colleges. Responsibilities: Preparation of Structural drawings. Thorough knowledge of AutoCAD since 2004.Expert in CAD work for Structural detailing of residential buildings, commercial and industrial structures. I was worked on many type of Foundation Dwg. Like Raft-Foundation, Retaining Wall Detail, Lift-Pit Foundation Detail, etc. Efficiently led the team of STRUCTURAL DRAUGHTSMAN by visualizing the project requirements and capable of managing all crises to match the dead line. Good interpersonal skills to coordinate technical aspects within the team and with Architectural and other disciplines. Structural Draughtsman (Building Structures) October2004 to November 2007 SEMAC CONSULTING Pvt. Ltd AT BANGALORE. Position : Engineering Consultant Scope of Work : 3-Industrial, and 3-Public Buildings. STRENGTHS Aptitude to increase knowledge through continuous learning & Hardworking, Maintaining good relations with a friendly attitude, dedication towards a task once confided to complete with sincerity, punctuality and hard work. ACADEMIC CREDENTIALS ------------------------------------- • AMICE Civil Engineering - 2015 By Board of Technical Education. (fromInstitution of Civil Engineers India) PERSONAL DETAILS Father’s Name: Srinivasulu P. Date of birth: 25th December 1981 Current Address: #5, Ground Floor, 12th main, 14th cross, Wilson Garden, Bangalore – 5600301, Karnataka. Permanent Address : #26/831-3, Bangaraiah Kottal, Mittamadi, Proddatur, Kadapa (Dist) Andhra Pradesh-516360 Passport Details : No. N4670605 (Date of Issue: 12-NOV-2015 to Date of Expire: 11-NOV-2025). Gender: Male. Marital Status: Single. Number of Dependents: 4. Languages Known: Hindi, English, Kannada, Tamil. Software Skills : Autocad 2000-16, MS Office, BIM - Revit 2012 & 2014, ArmaCAD V8 & Bentley rail (Basic) AFFIRMATION Date: Place: VIJAYAGOPAL.P

Mechatronics engineer with vast experience of ATE Panel & Harness Design using SOLIDWORKS Electrical 2D & 3D, Control System Design, Control Panel & Electrical Schematics design using AutoCAD Electric... Read more

Mechatronics engineer with vast experience of ATE Panel & Harness Design using SOLIDWORKS Electrical 2D & 3D, Control System Design, Control Panel & Electrical Schematics design using AutoCAD Electrical, Design of Piping & Instrumentation Diagram (P&ID)

Mechanical Design Engineer. Following are my skillset: • Using AutoCAD 2D to Make Piping & Instrumentation diagrams, Layout diagrams, Hydraulic Circuit diagrams, Pneumatic Circuit diagrams, Electrica... Read more

Mechanical Design Engineer. Following are my skillset: • Using AutoCAD 2D to Make Piping & Instrumentation diagrams, Layout diagrams, Hydraulic Circuit diagrams, Pneumatic Circuit diagrams, Electrical Circuit diagrams & Manufacturing Drawings. • Can Effectively develop models, assemblies and generate General Appearance Drawings using CAD Modelling on Solidworks. • Making Manufacturing & fabrication drawings of different Structures and parts for mechanisms. • Carryout Finite Element Analysis (FEA) for different components using Simulation in SolidWorks.

We , Vedant Resources & Infrastructure Development, are a young and dynamic company from Pune, India serving customers like KNM Process Malaysia, VGas LLC ( Formerly McGuffy Inc), R.A.M. Industries I... Read more

We , Vedant Resources & Infrastructure Development, are a young and dynamic company from Pune, India serving customers like KNM Process Malaysia, VGas LLC ( Formerly McGuffy Inc), R.A.M. Industries Inc , Thermatech Ltd (A Bassett Inc), Novatherm Boilers Canada, CADshroer Germany, Solidface Brazil, EagleBurgmann & Bosch Group. Our Engineering Services include: • Design & Engineering: (Heat Exchangers, Pressure Vessels, Storage Tanks, Boilers & Chimney) • Process Engineering:(Mass & Energy Balance, PFD, P&ID, Process Data Sheets, Equipment Layout & Elevation ,Plant Layout & Elevation) • Piping Engineering: (P&ID, Piping Layouts, Isometrics, Thermal Stress Analysis, BOM/MTO) • Civil & Structural Design services: (Structural analysis using STAAD, Structural fabrication drawings, Foundation designs / RCC Design, etc). • Electrical & Instrumentation • Knowledge - Software & Simulations: (Process Simulation S/W -ASPEN-HYSIS-CHEMCAD, VB Based Programming, Modeling -SolidWorks, Etc., Piping Engineering -PDMS, etc.) We also provide mechanical engineering services like 3D modeling, 2D drawings, CAE/FEA (ANSYS), Meshing (Hypermesh & ANSA), CAD, CFD, etc. Mechanical engineering services include: • CAD Services -3D Modeling & 2D Detailing with GD & T using AutoCAD, Inventor, SolidWorks, etc. • Reverse Engineering. (Point cloud, B-Class & A-Class Surface Modeling, Polygon / Watertight solid Models, Cross sections or Spines) • 3D Printing • Product design & Development • Industrial Design FEA / CAE Services: • Static Analysis-Linear Elastic and Non Linear • Dynamic Analysis-Implicit / Explicit (Modal, Harmonic, Transient …) • Advanced Non Linear Analysis • Thermal Analysis • Fatigue Analysis • Coupled Field Analysis , • Computational Fluid Dynamics • Meshing (Hypermesh & ANSA) Connect : parag (at) vedantengineering (.) c om

**Design Engineer with 4 Years of Expertise in SolidWorks and AutoCAD** As a dedicated Design Engineer with four years of hands-on experience, I bring a comprehensive skill set in SolidWorks and Auto... Read more

**Design Engineer with 4 Years of Expertise in SolidWorks and AutoCAD** As a dedicated Design Engineer with four years of hands-on experience, I bring a comprehensive skill set in SolidWorks and AutoCAD, specializing in a wide range of drafting and modeling tasks. My commitment to precision and attention to detail has allowed me to excel in diverse areas, including: **Piping Layout and Equipment Layout:** - Proficient in designing complex piping systems and equipment layouts, ensuring seamless integration and optimal functionality. **2D to 3D Conversion:** - Expertise in transforming 2D drawings into detailed 3D models, enhancing visualization and understanding of design concepts. **Product Design and 3D Modeling:** - Creative problem solver with the ability to conceptualize and develop innovative product designs, backed by extensive 3D modeling skills. **Shop Drawings and Product Drawings:** - Adept at creating shop drawings and product drawings that facilitate manufacturing processes and maintain design integrity. **P&IDs and Process Flow Diagrams (PFDs, HFDs):** - Proficiency in producing clear and accurate Piping and Instrumentation Diagrams (P&IDs) and Process Flow Diagrams (PFDs, HFDs) for process engineering applications. **CAD Drafting Expertise:** - Extensive experience in drafting various types of documents, including technical drawings, schematics, and layouts. My goal is to provide clients with design solutions that are not only functional but also aesthetically pleasing. I approach each project with a commitment to delivering excellence, and my ability to adapt to diverse design challenges ensures that I meet or exceed expectations consistently. Whether you need assistance with product development, drafting, 3D modeling, or any other design-related task, I am well-equipped to turn your ideas into reality. I am dedicated to maintaining open communication, meeting deadlines, and delivering results that align with your vision and objectives.

Piping layout drawings & general arrangements (GA) Isometric & spool drawings for fabrication P&IDs (Piping & Instrumentation Diagrams) Equipment layouts and pipe support details As-built drawings and... Read more

Piping layout drawings & general arrangements (GA) Isometric & spool drawings for fabrication P&IDs (Piping & Instrumentation Diagrams) Equipment layouts and pipe support details As-built drawings and design revisions Coordination with multidisciplinary teams to resolve clashes

Also possess good knowledge and command in Computer Aided Drafting & Designing. o Direct Co-ordination with our esteemed client Tecnicas Reunidas (TR) for getting the design jobs and to do. o Esti... Read more

Also possess good knowledge and command in Computer Aided Drafting & Designing. o Direct Co-ordination with our esteemed client Tecnicas Reunidas (TR) for getting the design jobs and to do. o Estimation of Man Hours and Delivery Date negotiation with respect to the Projects. o Having supervisory/coordinator experience as team leader of 35 Designers. o Allocating the drafting work to the designers as per their knowledge and capacity. o Planning the work and requesting the software Licenses monthly wise as per project. o Conducting Telephonic and Personal interviews for recruiting the designers. o Coordination with other departments with respect to drafting activities. o Ability to provide training and instructions based on software & Project specifications. o Experience in planning, progress monitoring, forecasting and reporting for SPPID application. o Developing and maintaining the standard Legend drawings, templates and procedures to ensure P&ID information is maintained at a high level of quality in line with the project specification. o Intergraph Smart Plant P&ID Set-up and Customization of Catalog symbols, Data Dictionary, Filters, Formats & Rules, Report generation and Trouble shooting etc… o Regular Database clean-up, solving day to day database errors, publishing and taking Plant Backups. o FUGITIVE EMISSIONS (F.E) (Identification of hazardous lines) o Preparation of Process Flow Diagram (PFD) o Preparation of Piping & Instrumentation Diagram (P&ID) (Including As-built, Construction and Demolition drawings) o Preparation of Hazardous Area Classification Diagram (HACD), Design Pressure & Temperature Diagram (DPTD) Material Selection Diagram (MSD), Block Flow Diagram (BFD), Process Safeguarding Diagram (PSD), Fire Fighting Diagram (FFD) and other engineering flow schemes. o Extraction and checking of Line list, Equipment List, Valve List using Inconsistency report from Smart Plant P&ID. o Checking and updating the P&ID’s referring Equipment and Instrument data sheets. o Maintaining Tracking of Incoming & Outgoing documents to & from Clients. Software’s & Packages Known  SPP&ID Setup & Customization : Version 2007 & 2009  Oracle Database Management : Version 10g  Smart Plant P&ID (SPP&ID) : Version 4.1, 4.3, 2007 & 2009  Smart Sketch (PFD) : Version 4.0  AutoCAD : Version 2000 to 2013  Micro station : Version V7 & V8 External Training - 3: Software : ORACE 10g DATABASE MANAGEMENT TRAINING Company : ASM Software Technologies, Bangalore Duration : 1 Week Month & Year : January 2012 Name of Faculty : Mr. Prasad External Training - 2: Software : SPP&ID Setup & Customization Version 2007 Company : ROLTA, Bangalore Duration : 3 Weeks in Month & Year : Name of Faculty : Mr. Madan External Training - 1: Course : Process Plant Layout & Piping Design Company : Private Course, Chennai Duration : 4 Weeks Month & Year : Name of Faculty : Mr. Shankara Maharajan (Piping Engineer) Operating Platform  Windows XP Professionals  Microsoft Office Products Abroad Experience: Deputation - 2: Project : YANBU Export Refinery Duration : 3 months from October 2010 to December 2010 Location : Madrid, Spain Designation : Lead Designer – Process Software used : Smartplant P&ID 2009 Deputation - 1: Project : Al-Jubail Export Refinery Duration : 3 Months from February 2010 to May 2010 Location : Madrid, Spain Designation : Lead Designer – Process Software used : Smartplant P&ID 2007

Over 12 Years of experience producing working drawings in the field of Civil, Electrical, Piping, Instrumentation & Telecom. Over 9 years of experience with Autocad & Microstation. A team player and T... Read more

Over 12 Years of experience producing working drawings in the field of Civil, Electrical, Piping, Instrumentation & Telecom. Over 9 years of experience with Autocad & Microstation. A team player and Team Leader working with engineers and co-workers to accomplish the tasks. Highly skilled with the ability to plan ahead and complete the projects in the most efficient way. Skilled in AutoLisp Programming. Knowledgeable in the usage and programming of Microsoft Office Suite programs.

I have experience of greenfeild project development in 3D software, i create hole plant as per client requirement, like, piping, civil, structural, electrical & instrumentation etc.

I have experience of greenfeild project development in 3D software, i create hole plant as per client requirement, like, piping, civil, structural, electrical & instrumentation etc.

• To Design PLANT LAYOUT for proposal as per client’s requirement. • Preparation of “CIVIL AND MECHANICAL G.A.” as per client’s approved plant layout. • Preparation of PFD (Process Flow Diagram). • Pr... Read more

• To Design PLANT LAYOUT for proposal as per client’s requirement. • Preparation of “CIVIL AND MECHANICAL G.A.” as per client’s approved plant layout. • Preparation of PFD (Process Flow Diagram). • Preparation of P&ID(PIPING AND INSTRUMENTATION DIAGRAM). • To prepare the FABRICATION DRAWINGS for the components to be fabricated. • Preparation of PIPING DRAWINGS. • To generate the BOM (BILL OF MATERIAL) for every drawings of the respective projects. • To visit the respective site for checking the progress and cross checking the practice difficulties and introduce them in the drawings as well as layouts.

WhiteLines has been specializing for the last two decades in providing a complete solution for Industrial Automation services, Oil and Gas Services, Piping Solutions, QC Engineering Solutions, Non Des... Read more

WhiteLines has been specializing for the last two decades in providing a complete solution for Industrial Automation services, Oil and Gas Services, Piping Solutions, QC Engineering Solutions, Non Destructive Testing Services, Maintenance of Industrial Plants Designing of electrical, Mechanical Designing and Circuit board systems, DCS, PLC, HMI, SCADA & Instrumentation. Since its foundation, WhiteLines has been offering turnkey solutions for Industrial Automation services, Marine Services and oil and gas services. AUTOMATION DIVISION. MARINE DIVISION. OIL AND GAS DIVISION. AUTOCAD PIPING DESIGN SOLIDWORKS DRAFTING MECHANICAL DESIGN ANALYSIS ELECTRICAL CAD

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with o... Read more

Drafting HVAC Shop Drawings according to SMACHNA. As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with other trades. • Design energy efficient HVAC systems in Autocad for residential andcommercial(stores,medical facilities,schools,offices) buildings in NYC also do Shop Drawings. •Coordinate HVAC design with other trades: plumbing,• sprinklers,RCP Review applicable design standard requirements, codes and regulations as they relate to the project according to ASHRAE or NYCECC. •Assist the Lead Mechanical Engineer on the development of Instrumentation and Control design for Mechanical systems. • Approve Shop Drawings. • Prepare plans,specifications,schedules,documentation. • Processing Comecheck and Energy Conservation codes. • Prepare as-built drawings.

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspecti... Read more

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspection using 7 QC tools. ➔ Inspected product designs prior to use and producing the product as per customer recruitments. ➔ Preparing PPAP documents and maintaining logs for management to review. ➔ Investigated in-process non-conformance and effectively determined the scope of the non-conformance and configured NCR reports. ➔ Communicated to peers, manufacturing and maintenance personnel and taking preventive action using WHY-WHY analysis. ➔ Performing JH activity and maintaining 5S while using work habits. ➔ Documented and presented the machine non conformances and products failure in Quality TPM. ➔ Attending customer complaints and preparing 8D reports. Additional Technical Qualifications : ➔ PDMS Pipe modeling as per P&ID and study piping including necessary line slopes, instrumentation, valves and special purpose items. ➔ 3D modelling of Equipment, pipework, Structure, Draft, isodraft in PDMS. ➔ Pipe rack and expansion loop design. ➔ Piping material specification and valve data sheet. ➔ 3D modelling of Support Modelling using MDS. ➔ Preparation of material specification and MTO. ➔ Pressure design of pipe and components. ➔ Wall thickness, branch reinforcement &PT rating etc. ➔ Flexibility analysis of piping systems. ➔ Stress intensification factor calculations. INDUSTRY KNOWLEDGE : ➔ International design codes & dimensional standards. ➔ ANSI/ASME, API, BS, ASTM & their use in design & analysis. ➔ PFD & P&ID drawing, process equipment & plant layout Statutory bodies & regulations. ➔ Geometric Dimensioning & Tolerancing.. ➔ Production Part Approval Process (PPAP). ➔ Total Productive Maintenance (TPM). ➔ Manufacturing Engineering. ➔ Root Cause Analysis. ➔ ISO Standards.

I am a Mechatronics Engineer, graduated in 2020, with strong knowledge in electronics and instrumentation design. I specialize in PCB design using KiCad and mechanical design using FreeCAD, with exper... Read more

I am a Mechatronics Engineer, graduated in 2020, with strong knowledge in electronics and instrumentation design. I specialize in PCB design using KiCad and mechanical design using FreeCAD, with expertise in creating custom machine parts and their driving components. My multidisciplinary background allows me to design and develop systems that seamlessly integrate mechanical, electrical, and control elements. I am passionate about building innovative solutions, from circuit design to 3D modeling, ensuring both functionality and efficiency. If you need reliable, precise, and creative engineering support for your project, I can help bring your ideas to life with professional designs and problem-solving expertise.

30+ years of experience in detail design and engineering of onshore / offshore Piping layouts, equipment and Pipeline for Oil & Gas Plants, Chemical plants, Refinery and Petrochemical plants, for vari... Read more

30+ years of experience in detail design and engineering of onshore / offshore Piping layouts, equipment and Pipeline for Oil & Gas Plants, Chemical plants, Refinery and Petrochemical plants, for various EPC, Proposal, Feed and PMC projects. Independently handled 3D model review for Clients, other discipline and internal. Vendor drawing review & comment. Co-ordinating between other department like Process, Civil, Electrical and Instrumentation. 3D modelling activity using PDMS, E3D / SP3D, S3D, PDS, Clash checking / resolving. Work allocation to area Designer, manpower allocation for area designers. Preparation of Piping Study, Plot Plan, Tie-in schedule, details & Isometrics. Preparation and checking of MTOs large volume of P & IDs (more than 500 Nos.). Attending Project review / progress meetings. Optimisation for Value Engineering for EPC Project (Cost reduction considering even the value of 1$). Have thorough understanding of international standards API, ASME, ASTM, and company specifications of Maersk oil, Shell, Exxon Mobil, KOC, EIL, Qatar Petroleum, ADNOC, BP, Aramco, Petronas, Technip, and Foster Wheeler. Supported the construction team on maximizing the productivity through frequent site visits & prioritising resolving site queries remotely. Working knowledge of Piping stress analysis input entry using CAESAR II for Plant Piping. Excellent working knowledge of Pipeline activities, alignment drawings, route selection, crossing details, typical details drawings etc., having successfully completed 5 projects. Excellent working knowledge of HSE activities, Fire Hydrant layout, Sprinkler and Foam system layouts. Working knowledge of HVAC Duct & Cable Tray routing activities. Successfully completed many project / proposal deliverables within budgeted man-hours for AutoCAD / PDMS and PDS projects. Successfully working from home (WFH) to support many Proposal and Project works. Organised MS Team review meetings for Total-client, Tilenga CPF-Uganda project, ADNOC-project lightning Abu Dhabi proposal (Onshore/Offshore) Raiser platform from Offshore to Onshore, plot plan review for inter disciplines. Worked on MTO, Piping interconnecting layouts, document reviews, comment and digital signatures. Working on Brown field Isometric checking and digital signatures for Thai oil “Clean Fuel Project, Sriracha, Thailand”, Isometric issued more than 1million inch dia. • Managing Piping activities in allotted man-hours and schedule with quality requirements. • Developing Plot Plans, Plot Plan optimization. • Preparation / Checking of material take-off (MTO), Bill of Quantity (BOQ) from P & IDs / detailed drawings / Tender documents. • Work allocation/Planning/Guidance to area Designers. • 3D Model review & comments. • Organizing / Attending 3D Model Review / Progress Meetings. • Preparation for Tie-in details, schedules, sketches & Isometrics. • IDC documents Generation / Checking. • Preparation for Piping study drawings. • Checking of above deliverable documents with related standards & codes. • Coordinate design information with other disciplines in the development of complete drawing package. • Perform department planning tasks such as manpower forecasting, work assignments, Proposals and Developed Engineering standards & Guidelines. • Assist Department Supervisor / Engineer in providing directions to Design team. • Review and check design drawings and vendor drawings. • Interacting with Clients, Vendors and providing technical support to site construction groups/team. • Developing Piping Layouts, Equipment Layouts using PDMS / PDS. • Developing detailed design engineering drawings using information from various sources which may include Piping Site studies, vendor drawings, catalog data, engineering sketches, Reference drawings and input from other disciplines. • Conduct field investigations, produce clear field reports with detailed sketches, written and verbal instructions. • Basic Design to Detailed Engineering of Piping and Prepare As-Built drawings. • Perform project related tasks such as scope development, Estimating, Scheduling and job status. • Knowledge of the International codes (i.e., API, ASTM, ANSI, codes), Practices and standards especially relating to Oil & Gas Industry (i.e., ADCO, MAERSK, ARAMCO, QP Design & Engineering practices). • Pipeline Alignments Drawing, Checking / Preparation. • Pipeline Route maps / Typical Pipeline installation drawing, Alignment drawings checking / Preparation. • Can work and perform under critical schedules. Adaptability for new environment working conditions. • Can independently handle any work, Effective time management & Communication skills. • Able to organize and prioritize design drafting work, to meet deadlines. • Specification generation using AVEVA VPRM.

15+ years of experienced in the field of HW design and development life cycle process, Hands on experienced in Automative domain, Medical instrumentations, EMI/EMC knowledge, Highspeed board design, S... Read more

15+ years of experienced in the field of HW design and development life cycle process, Hands on experienced in Automative domain, Medical instrumentations, EMI/EMC knowledge, Highspeed board design, SI/PI analysis.