Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D mo... Read more

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D modelling of mechanical components, Fixtures design and Special purpose machine design. I have good typing skills on Word, Excel, Powerpoint and Notepad. I have good working skills on Photoshop and Illustrator. Thanks, Srinivasan

Hi everyone 2021 Passed out civil enginner Having an great passion in civil design field and great knowledge in Autocad and Revit software Worked as an plan draftsman for an project Will post my D... Read more

Hi everyone 2021 Passed out civil enginner Having an great passion in civil design field and great knowledge in Autocad and Revit software Worked as an plan draftsman for an project Will post my Designs here Hope you guys like it Thanks :)

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

I'm Pujetha, a 2nd-year B.Tech Civil Engineering student at NIT Puducherry (Batch of 2023), striving for continuous improvement in academics and professional skills. With expertise in AutoCAD (92% sc... Read more

I'm Pujetha, a 2nd-year B.Tech Civil Engineering student at NIT Puducherry (Batch of 2023), striving for continuous improvement in academics and professional skills. With expertise in AutoCAD (92% score in training), I deliver innovative and accurate designs. I excel at leveraging creative strategies and effective communication to promote events and initiatives. I possess strong public speaking skills, enabling me to confidently engage audiences and present ideas persuasively. My interests lie in sustainable development, infrastructure design, and utilizing modern engineering solutions to create a positive impact. I'm eager to take on work opportunities, earn my own money, and gain real-world experience in the civil engineering field.

♦ Products Design, Development & Analysis engineer with 2 year of experience working to enhance overall value and performance for customers and company. ♦ KEY SKILLS - CAD Tools: NX CAD (Part Modellin... Read more

♦ Products Design, Development & Analysis engineer with 2 year of experience working to enhance overall value and performance for customers and company. ♦ KEY SKILLS - CAD Tools: NX CAD (Part Modelling, Sheet Metal), CatiaV5 (Part Modelling, Sheet Metal), Solidworks (Part Modelling, Sheet Metal), CREO (Part Modelling, Sheet Metal), AutoCAD (2D) CAE Tools: Finite Element Analysis: ANSYS Workbench Work: ♦ Preparing 3D Cad and 2D detailing and following workflow and completed the Route from Development stage to initial Release also take complete ownership of mechanical design. ♦ Also prepare the Design Change Request for making updates for Released Product with customer Feedback or for manufacturing feasibility or Cost Reduction. ♦ Prepare a project for Finalize Design Concept and Complete ECR process, analyzed FEA results, Released Components designs including 2D drawings and verified BOM’S. ♦ Complete all engineering assignments related to product development accurately and on time including design calculations, 3D modeling and detailing (of parts and assemblies) and other aspects. ♦ Incorporated appropriate GD&T to assure the drawings are in line with DFM. Interfaced with production Team to ensure final designs are aligned with overall project goals and delivered defined schedules. ♦ I get excited about opportunities where I can create new products. I love connecting with new people ,You can reach me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a Mechanical Design Engineer with a Bachelor's degree in Mechanical Engineering and professional CAD experience. I specialize in creating accurate 3D models, assemblies, and 2D manufacturing draw... Read more

I am a Mechanical Design Engineer with a Bachelor's degree in Mechanical Engineering and professional CAD experience. I specialize in creating accurate 3D models, assemblies, and 2D manufacturing drawings using SolidWorks. My skills include: * 3D Part Modeling * Assembly Design * 2D Manufacturing Drawings * Sheet Metal Design * Engineering Drawings * Bill of Materials (BOM) * Design for Manufacturing (DFM) * AutoCAD Drafting I have professional experience preparing engineering drawings and CAD documentation while working on residential solar projects. I am now focused on providing mechanical design services using SolidWorks for product design, machine components, sheet metal parts, and 3D printable models. I am committed to delivering accurate, well-organized, and manufacturable designs while maintaining clear communication and meeting project deadlines. I continuously improve my CAD skills to provide high-quality solutions for every client. I look forward to helping bring your ideas from concept to production.

TG Architects is a Chennai based firm established in March, 2013 with Ar. Thinaguru, heading the Architectural department. Ar. Thinaguru is a graduate in Architecture and holds a Master's Degree in Co... Read more

TG Architects is a Chennai based firm established in March, 2013 with Ar. Thinaguru, heading the Architectural department. Ar. Thinaguru is a graduate in Architecture and holds a Master's Degree in Construction Management affiliated by UK. The dynamic team is integrated with the minds of Architects, Engineers, Accountant and Marketing professionals. The practice has finished a number of projects from Architectural and Interior Design to Landscape Design. The team has specialized Architects, with international exposure in the field, involved in the design process. Design solutions offered are backed by research and analysis of various components that are integral part of the design. The prime objective of our company being, extending support to clients from initial planning to final implementation of the project, we assist you build your dream like it's ours.

I am a civil design engineer with hands-on experience in planning, designing, and estimating building and infrastructure projects. Currently working at Texmo Industries, I specialize in CAD drafting,... Read more

I am a civil design engineer with hands-on experience in planning, designing, and estimating building and infrastructure projects. Currently working at Texmo Industries, I specialize in CAD drafting, 3D modeling, and site coordination using AutoCAD and SketchUp. I have previously worked as a lecturer and maintenance engineer at Sri Ranganathar Institute of Polytechnic College, where I developed strong technical mentoring and practical engineering skills. I also gained site execution experience as a Site Engineer at Vikruti Structure, handling planning and on-site management. In addition, I am actively building my own construction services under Dreamers Construction, focusing on quality design solutions, accurate estimation, and modern construction practices. My core skills include: • AutoCAD Drafting • SketchUp 3D Modeling • Planning & Estimation • Site Execution & Coordination • Basic BIM Workflow I am passionate about improving my design expertise and taking up challenging civil engineering projects.

I am an aeronautical engineer with hands-on experience in aircraft maintenance, CAD design, UAV development, and additive manufacturing. I specialize in creating accurate 2D drawings, 3D CAD models, S... Read more

I am an aeronautical engineer with hands-on experience in aircraft maintenance, CAD design, UAV development, and additive manufacturing. I specialize in creating accurate 2D drawings, 3D CAD models, STL files for 3D printing, and technical documentation. My expertise includes SolidWorks, CATIA, AutoCAD, OpenSCAD, and engineering drawing interpretation. I have worked on UAV design, aircraft structural projects, BOM preparation, and manufacturing documentation. I am committed to delivering high-quality, detail-oriented work on time. Whether you need product design, CAD modeling, 3D printing support, or technical writing,

Detail-oriented mechanical design engineer with 5 years of experience.Highly proficient in designing prototypes and functional products using CAD softwares.Familiar with industrial equipment and machi... Read more

Detail-oriented mechanical design engineer with 5 years of experience.Highly proficient in designing prototypes and functional products using CAD softwares.Familiar with industrial equipment and machinery. Sound knowledge of general machining techniques, various manufacturing processes and sheet metal forming.

mainly drafting on modular construction projects as a structural draftsman. worked on High rise residential, Industrial, Commercial projects. Being detail oriented is my strength.

mainly drafting on modular construction projects as a structural draftsman. worked on High rise residential, Industrial, Commercial projects. Being detail oriented is my strength.

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have... Read more

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have on-hands experience with this field of science.

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

We are offering 2D-3D plan services, as per Vastu, Ventilation, Efficiency and Budget. Be it Interior or Exterior Design, leave it to us. We make sure you get the best designs. Offering 360 view of... Read more

We are offering 2D-3D plan services, as per Vastu, Ventilation, Efficiency and Budget. Be it Interior or Exterior Design, leave it to us. We make sure you get the best designs. Offering 360 view of Rendered Image, Giving collaborate access to the models.so that you can modify it by your own. Actually I'm working in an MNC company. so, I'm not doing project based on hours and charges will not be based on hours also. ( Charges mentioned here are the basic one. ) Don't worry, We are delivering the best design services at extremely low cost, call us now for free quotation. If any project is available means you can contact me at any time. THE built Design Studio

I am a Mechatronics Engineering student with great interest and passion for 3D modeling. I have been practicing 3D design for the past 1 year. For 3D models, I use the Siemens NX CAD software and for... Read more

I am a Mechatronics Engineering student with great interest and passion for 3D modeling. I have been practicing 3D design for the past 1 year. For 3D models, I use the Siemens NX CAD software and for 2D designing and drafting I use the AutoCAD software.

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. *... Read more

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. * 3D mechanical designing and detailing.

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert an... Read more

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert and if you need services like mentioned above, I'll be right choice for you. I can design different mechanical parts, fixtures and instruments in Autocad. Services: I am offering • 2d drawings • CAD 3d modeling. • isometric 2d CAD drawings • 3d product designing. • mechanical parts designs. • high realistic rendering. I will provide dwg, dxf, jpg, png, pdf file formats. Why choose me: • 100% money back guarantee. • I will provide fast delivery service.

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

Creating mechanical manufacturing drawings, 3D-Modeling and conceptual design. Well aware of drawing standards ISO and ANSI. Having experience in larger weldment drafting, Assembly detailing and shee... Read more

Creating mechanical manufacturing drawings, 3D-Modeling and conceptual design. Well aware of drawing standards ISO and ANSI. Having experience in larger weldment drafting, Assembly detailing and sheet metal drafting. Having Experience in Oil and gas extraction Equipment, Automotive parts manufacturing and medical devices.

AutoCAD –Certified Creo/PRO-E Wildfire - Certified MS Office • Sound Knowledge in GD&T. • Ability to read and understand Production drawings. • Strong ability to write detailed engineering specific... Read more

AutoCAD –Certified Creo/PRO-E Wildfire - Certified MS Office • Sound Knowledge in GD&T. • Ability to read and understand Production drawings. • Strong ability to write detailed engineering specifications. • Excellent communication skills and profound ability and desire to work in a team environment. • Perform root-cause analysis, design guidelines, best practices, past program lessons learned, competitive product benchmarking information. • Create drawings and apply GD&T, Critical and Significant Characteristics. • Generate BOM's, maintain open issues lists, and typical engineering documents • Worked with other professionals, within and outside the engineering specialist.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.

With over 2.0 years of experience as a Mechanical Design Engineer, I specialize in CAD design, product development, and prototyping. I've been instrumental in designing mechanical components for vario... Read more

With over 2.0 years of experience as a Mechanical Design Engineer, I specialize in CAD design, product development, and prototyping. I've been instrumental in designing mechanical components for various products, ensuring functionality and manufacturability. My passion for sustainable design and innovation drives my commitment to excellence in the field of mechanical engineering.

Proven expertise in Product design with knowledge in surface and solid modelling softwares like AutoCAD , Creo , CATIA, Solid works, Ansys and Experience in Value analysis and Value Engineering driv... Read more

Proven expertise in Product design with knowledge in surface and solid modelling softwares like AutoCAD , Creo , CATIA, Solid works, Ansys and Experience in Value analysis and Value Engineering driving Cost focus from design stage of a product.

We are providing 2D AutoCAD interior design package service from India and Dubai. As per 3D approved render or any reference design details we are creating Autocad technical design drawings by package... Read more

We are providing 2D AutoCAD interior design package service from India and Dubai. As per 3D approved render or any reference design details we are creating Autocad technical design drawings by packages. Team strength 6 experienced Draftsman with one Technical coordinator.

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining eng... Read more

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining engineering We provide the following CAD and Design services CAD services: --------------- CAD Conversion work (2D to 3D, 3D to 2D, 2D to 2D, 3D to 3D) Legacy Drawing Conversion (Raster to CAD, Paper to CAD, Hand sketches to CAD) Fix CAD model errors, Optimize CAD models CAD Tool standardization / migration (Re-featuring) Convert concept R&D model to design model Convert industrial skeleton (skins surface) to design model Mechanical Drafting / Detailing Tolerance stack-up analysis Apply GD&T Pre-defined part library creation (customization) Prepare Bill of Materials Fixture design (Assembly, Inspection, holding, testing fixtures etc.) Standardization of drawing Apply DFx (Design for manufacturing, assembly Reverse Engineering (scan and convert) Tear down design (Bench mark study / competitor product analysis) Sustaining Engineering service: -------------------------------- ECO / ECN Redline corrections and design update Field failure analysis and reporting Engineering design changes (Mechanical) Design optimization (combine parts, remove non-critical features / parts, Assembly steps) Create / revise technical documentations Plastic part design services: ----------------------------- Plastic part design (fit, form, function consideration) Core and cavity extraction Convert part to moldable (apply parting surface, Gating consideration, Side / split cores) Part conversion (metal to Plastic) Injection molding design Other services: ------------------ Presentation making (Sales/ marketing brochures, training material creation, Proposition creation, case studies etc.) Technical documentation Data migration Training --------- Solidworks Online Training (Part, Assembly, Detailing. Plastic molds) – Original license holder from Dassault systems Experience: ------------- Talented Engineering professional with overall 20+ years of experience in various industry domains where effectively managed engineering projects in medium and large organizations. Predominantly worked in medical device domain for past 10+ years Product experience: Medical device, consumer products, home appliances and Industrial products Product design & Development

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools lik... Read more

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools like E3d, Sp3d, Pdms and Pds. Roles and Responsibilities:- Piping layout designing 3d Modeling of Equipment, Piping, etc., Preparation of Plotplan,Keyplan,Equipmentlayout,Piping GA’s Vendor drawings checking Interacts with other disciplines Inter-Discipline Documents Checking & Clearing Isometric checking Nozzle orientation Support callout based on stress output Attending Model review & comments providing to other disciplines MTO Activities Input preparations for civil works Tie-in/As built works in both Brownfield and Greenfield IFC iso issuing Preparation of Combined UG Plan drawings UG piping/Isometrics Preparation of piping GA drawings Manages and maintains the Project Documentation Model close out activities