Hire Medical Device Designers near England, United Kingdom

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - Consumer Hardware Products I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Protoyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practised skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - High End Consumer Products - Low-Cost Consumer Products - Power Tools I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Prototyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practiced creative skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

Hi, I'm Cillian McCay and I am a Part-Time Student at Ulster University studying Mechatronic Engineering while working Full-Time at Sepha. I've a Foundation Degree in Mechatronic Engineering while wor... Read more

Hi, I'm Cillian McCay and I am a Part-Time Student at Ulster University studying Mechatronic Engineering while working Full-Time at Sepha. I've a Foundation Degree in Mechatronic Engineering while working towards a Full Degree. While doing this I have been working full time which has gave me the opportunities to gain and improve my skills in Solidworks and Solid edge. it has also allowed me to gain an insight into the Industry over the past 4 years. in these 4 years I have worked on small to big projects ranging at lowest £25,000 to highest £190,000. for these projects I was in control of; • review plans and specifications according to the plan. • Manage to oversee the work of subordinate staff contact architects or Engineers. • Prepare plans, details, specified and cost estimated of plumbing, heating, ventilating, air conditioning and general piping system. I have also worked on product design which I currently do at Sepha for innovation and development of specialised, high quality equipment for use in the manufacture of pharmaceutical blister packs, medical device and healthcare products.

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation au... Read more

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation author. I have held stress signatory status for 8 years, whilst substantiating high integrity, safety critical equipment and structures. I can apply my expertise to metallic, polymer or composite structures and mechanisms in any industry. I have primary interests in remote handling, precision medical devices, fluidics, mechanism design, complex structures and heavy lifting equipment. I enjoy all areas of design; with specific expertise in mechanisms, traditional static and dynamic hand calculations, seismic assessment, FEA, classical mechanics on mechanisms and structures, fatigue and failure investigations and injection moulded product design. I am a good communicator and enjoy presenting to stake-holders. I am an expert user of ANSYS Workbench, RFEM/RSTAB, Solidworks and MathCAD with licenses for all of the aforementioned software. I can produce substantiation calculations to allowable stress and limit state methods and I have extensive experience in producing calculations to numerous codes – primarily BS EN 13001 (crane code), F.E.M Section I & II, Eurocodes, BS2573 parts 1 and 2, BS5950. I am a well-rounded individual with a proven track record in a number of diverse industries, including: cranes/heavy lifting equipment and mechanisms, remote handling, bulk materials handling, precision medical devices, aerospace actuators/valves, hydraulics and general consumer products. I regard analysis and mechanical design as integral entities and I offer design by substantiation services, where equipment is designed to be code compliant from it's inception. I have had several of my designs patented and I take pride in pioneering new engineering concepts and technology.

Throughout the past 10 years I have been involved quite extensively with multiple different CAD Packages. Starting with Pro-desktop during my College years and then moving onto projects using Creo-par... Read more

Throughout the past 10 years I have been involved quite extensively with multiple different CAD Packages. Starting with Pro-desktop during my College years and then moving onto projects using Creo-parametric, Autodesk 2D and 3D as well as Solidworks. Because I have been immersed in Computer Aided Design for such a large percentage of my adult life, I have developed a extensive knowledge of the medium as well as being able to adapt to new programs and method comfortably. 6+ Years of Pro-desktop experience throughout Senior school. Includes GCSE and A-level design projects as well as multiple shorter projects. Received an Arkwright Scholarship for Engineering potential, CAD proficiency was required in the examination phase. Self taught Creo Parametric for a 2 month concept design contract to develop a medical device patent. 3+ Years of AutoCAD and Solidworks at University where 4 hours a week was spent on a dedicated CAD course. Was lead design Engineer for 2nd year cross-functional group design project to develop a remote controlled Hovercraft. 1 Year spent at Cummins Turbo Technologies as an Intern in the Supplier Quality Improvement Engineering department where I worked on Product improvement teams using Creo-Parametric.

Senior Design Engineer at a large automotive OEM. Experience in the Automotive and Medical Device fields.

Senior Design Engineer at a large automotive OEM. Experience in the Automotive and Medical Device fields.

For over 10 years now, I have been "making it work". I have contributed towards a variety of different spacecraft, including Mars rovers, and ion engines for a mission to Mercury. Since I started free... Read more

For over 10 years now, I have been "making it work". I have contributed towards a variety of different spacecraft, including Mars rovers, and ion engines for a mission to Mercury. Since I started freelancing in 2015, in addition to the space work, I have branched out into other industries and types of jobs - including, but not limited to, various 3D printed UAVs, large composite high-altitude fixed-wing UAVs, ejector seat components, prosthetics and other assistive medical devices. Accustomed to every stage... – Concept, Development, Build, Testing, Support. – High quality outputs in a timely yet thorough manner. – Pragmatic and hands-on approach to problem-solving. – Approachable, with concise and honest answers. – Passionate about all things Engineering. “An experienced, versatile and hands-on mechanical engineer with a background in both detailed and top level design, across a variety of disciplines and industries. Proven ability to deliver high quality work, be it a small one-off job, or a large multi-million pound project.”