Hire Local CAD Designers near Warrington, England

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visuali... Read more

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visualize people's dreams. I love my profession and I'm looking for challenges.

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient c... Read more

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient client communication to identify key targets for products and contracts

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am an artist with years of experience and a passion for sculpture. I have become expert in ZBrush and 3d printing. I managed a 3d printing company in London. My main specialisation is bust portraitu... Read more

I am an artist with years of experience and a passion for sculpture. I have become expert in ZBrush and 3d printing. I managed a 3d printing company in London. My main specialisation is bust portraiture.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mi... Read more

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mixture of experience, problem solving and creativity — that’s why we love it. Have a look around the website to see what we do and if you have a prototype that needs building or a product that needs designing, don’t hesitate to get in touch.

2D and 3D visualization specialist Architect with 3+ years of experience in both residential and commercial design projects. Bachelor's degree in Architecture, graduated in 2013. Master's degr... Read more

2D and 3D visualization specialist Architect with 3+ years of experience in both residential and commercial design projects. Bachelor's degree in Architecture, graduated in 2013. Master's degree degree in Interior Architecture, graduated in 2015. I have a great knowledge in 2D CAD software, 3D modeling + rendering software and 3D animation software for architecture. I'm capable of designing from scratch any idea/ concept you may have and produce multimedia material for your presentations, patent drawings or just for attracting possible investment to your project. I'm always trying to fulfill client expectations with good and compelling design.

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and... Read more

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and Moveable Structures. I can provide a focussed extension to your core team that will solve your companies’ problems including; • R&D • Design assessment and prototyping • Engineering drawings • Site surveys • Manufacturing management/improvement • Energy use and sustainability applications • And many more, just get in touch!

I am a multi-disciplined engineer with over 30 years’ experience and have been developing novel orthopaedic instruments and implants for over 20 years. I am experienced in designing with both 2D and 3... Read more

I am a multi-disciplined engineer with over 30 years’ experience and have been developing novel orthopaedic instruments and implants for over 20 years. I am experienced in designing with both 2D and 3D CAD; and with over 10 years’ hands on manufacturing experience so can develop conceptual designs through to production with a clear understanding of the requirements for manufacturing.

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with pr... Read more

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with prior experience ranging from the wider automotive field to medical and industrial computer design. Highly experienced working mainly with Solidworks and Autodesk Inventor, but prior experience working with Siemens NX and Autocad.

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for... Read more

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for the client and supplier. I have over 3 years of experience in this field, of which I have spent on multiple projects providing detailed arrangement and manufacturing drawings for components of Steel Rolling Mill Plants. The primary services I provide are: + Mechanical Engineering + 2D/3D CAD Modeling + Detailed Engineering Drawings + Advanced Knowledge of GD&T and Placement + Concept Sketch to Final CAE Design + Intermediate FEA and CFD Analysis (with Report) + Mold/Cavity Design + 3D Rendering + CAD File Conversion I am a highly motivated and enthusiastic Mechanical Design Engineer with a strong background looking to expand my career in the freelancing industry to create a reputable freelancing profile which I can showcase my credibility through the quality of my work. In addition to my CAD expertise, I have a solid educational foundation and a strong passion for engineering and mechanical design that I believe will align well with the clients' set criteria. I am happy to find out how I can assist you in your future projects. Thank you for reading my profile. Akram Abuzakouk.

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creatin... Read more

Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creating parts ready for manufacture or prototype. Two years ago I co-foundered a technical design agency offering creative and technical support. We've worked with some big names such as Samsung, Lotus, Dyson, Courvoisier, Pelican, and Softbox to help develop point of sale stands, and product ranges. We use the latest CAD software to develop our models mainly utilising SolidWorks to create technical models, drawings and renders.

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the w... Read more

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the way. Currently I am open to new short-medium term projects. Ultimately, I'm here to produce the best work possible for whoever I'm working with. If you have a project that requires my skills, please contact me via LinkedIn or my email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & C... Read more

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & CAD, I am a creative innovator who enjoys using my technical mind to design structures, solve problems and shape the world around me. My software experiences include AutoCAD, Revit, Meshmixer and Fusion 360. With a passion for continually developing my strengths and abilities, I complete tasks to the highest standard, with attention to detail. I am a strong communicator who can foster the key relationships required to achieve success. Having undertaken several summer placements and design experiences, I am equipped with the technical skills required to meet client requirements.

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic... Read more

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic enclosures and products that are mechanical in nature. I create 3D models that are parametric, easy to modify and make.

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice poten... Read more

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice potential defects before they become a major issue. When creating a design, I consider not only its integrity and functionality, but also factors like as machinability, ergonomics, and cost-efficiency.

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initi... Read more

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initial concepts through design and prototyping, and into manufacture coupled with a strong knowledge of Design For Manufacture (DFM) or Design For Assembly (DFA). 3D & 2D Design Work Any kind of 3D Modelling and 2D engineering design work and CAD Design is being done in HCB everyday, precisely and within time targets. Our knowledge of various materials and production techniques allow us present different alternatives to clients. Composites HCB is capable of giving consultancy services on almost all sub-fields of composite design and production processes. Our main experiences are on hand lamination, vacuum bagging, vacuum infusion, L-RTM, RTM processes with Thermoset resins and injection with Thermoplastic resins. Tooling Design ➢ Big scale light-tool (SMP, MDF, etc.) plug & mould design and manufacturing consultancy for composites and sheet plastics production ➢ CNC milling process optimisation (cost, timing, quality) ➢ Transportation / Assembly Jigs & Fixtures design Mechanisms Design HCB Consulting understands state of the art manufacturing technologies from traditional lathe and milling cutter to modern 5 axis CNC work centres and erosion machines. We deliver robust bespoke mechanism designs that can be manufactured and work for long years without any problems

A well-presented and outgoing key account manager with a passion for building relationships. I have 17 years’ B2B experience in design & print agencies and a BA (Hons) in Creative Product Design & Mar... Read more

A well-presented and outgoing key account manager with a passion for building relationships. I have 17 years’ B2B experience in design & print agencies and a BA (Hons) in Creative Product Design & Marketing (1st Class). My approachable manner and ability to work under pressure, provides an excellent customer experience. I have acquired a variety of skill sets from sales and account management, to technical 3D CAD visualisations and website development. I am looking for the next step up where I can further develop my skills and make an impact. Key Skills • Account management. • Communication, zoom/teams meetings. • Product Design, development, • CAD modelling, visualisations & animation. • 2D Illustration, art & photo editing. • Product photography, 360° photography and VR tours. • Organisational skills/multi-tasking ability • Time management. • Adaptability, adept working under pressure. • Print management, procurement, distribution. • Project management & CRM systems. • Understanding Client’s Business & Needs. • Website management and development. • Marketing, SEO, Google analytics & Ads words. • Brand development, copyright and trademark registering. • IT support, computer maintenance, data cabling and network installations

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross... Read more

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross bikes and pushing the Fusion 360 software to its limits.

Industrial designer with 14 years of turn key design consultancy experience working for some of the top consultancies in both the UK and Australia. My career has spanned all product sectors including... Read more

Industrial designer with 14 years of turn key design consultancy experience working for some of the top consultancies in both the UK and Australia. My career has spanned all product sectors including Consumer, Medical, Industrial, soft goods and Furniture. I work from Brief to finished off tool product and have detailed knowledge of all manufacturing processes. I have spent a lot of time in China perfecting off tool samples to ensure fault free manufacture with various projects. Based in west wales and happy to travel the UK to meet with clients if required.

A Freelance designer for over 20 years, working on everything 3D from sketching, hand-built models, to CAD. projects as varied as F1 team merchandising to corporate receptions, to Pen and ink illustr... Read more

A Freelance designer for over 20 years, working on everything 3D from sketching, hand-built models, to CAD. projects as varied as F1 team merchandising to corporate receptions, to Pen and ink illustrations.

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD softwar... Read more

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD software is one thing, but understand the feasibility of the product and understand the CNC and 3D printing process is part of the 2D/3D design process. With this experience, I can make a new product from zero to works entirely in the final assembly. I can create a 3D model, 2D drawing, high-quality image rendering with many different file formats: STL, .STEP, .PDF

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.