Hire CAD designers & engineers in Swindon, England

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the w... Read more

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the way. Currently I am open to new short-medium term projects. Ultimately, I'm here to produce the best work possible for whoever I'm working with. If you have a project that requires my skills, please contact me via LinkedIn or my email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions... Read more

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions for CAD Design, Building Information Modeling (BIM), Engineering Calculations, Geometric Dimensioning, and Tolerancing, Piping and Instrumentation Diagrams, Block Flow Diagrams, Process Flow Diagram, Annual and Steady-State Building Thermal Analysis, Fluid Flow Analysis, and Finite Element Analysis.

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic... Read more

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic enclosures and products that are mechanical in nature. I create 3D models that are parametric, easy to modify and make.

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills... Read more

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills and knowledge of physics and CAD software and continue to learn about the industry. I have plenty of experience with SolidWorks, which I use as my main tool, but can easily adapt to any software. I am a fast learner, quick on my feet and always willing to go the extra mile. My friendly, open attitude was greatly appreciated by my superiors and colleagues in my previous roles. When I’m not on the job, I enjoy hiking, camping and spending time creating custom pc builds.

A member of the Institution of Mechanical Engineers, we provide high quality 3D modelling and photorealistic rendering from small to large products/components. With our tateled and experienced designe... Read more

A member of the Institution of Mechanical Engineers, we provide high quality 3D modelling and photorealistic rendering from small to large products/components. With our tateled and experienced designers, we utilize quality software to produce quality results.

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and... Read more

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and Moveable Structures. I can provide a focussed extension to your core team that will solve your companies’ problems including; • R&D • Design assessment and prototyping • Engineering drawings • Site surveys • Manufacturing management/improvement • Energy use and sustainability applications • And many more, just get in touch!

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Hi there! I'm Tim, a Product and Graphic Designer based in London. I graduated from Brunel University London with a First Class Honours Degree in Product Design Engineering, during which I spent a yea... Read more

Hi there! I'm Tim, a Product and Graphic Designer based in London. I graduated from Brunel University London with a First Class Honours Degree in Product Design Engineering, during which I spent a year working at award winning consultancy therefore, designing a range of products for manufacture as well as graphic and packaging solutions. ​ My expertise lies in 3D modelling and rendering, as well as graphic design, however I am experienced in the entire design process. I'm currently freelancing part time at design consultancy Makers Department, but I'm always looking to get involved in new, exciting projects, so if you are interested in my work please don't hesitate to get in contact!

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross... Read more

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross bikes and pushing the Fusion 360 software to its limits.

I am Monir, an experienced Industrial Designer and Product Engineer with over 12 years of expertise in analysis, design, 3D CAD modeling, automotive parts design, and plastic injection mold developmen... Read more

I am Monir, an experienced Industrial Designer and Product Engineer with over 12 years of expertise in analysis, design, 3D CAD modeling, automotive parts design, and plastic injection mold development. I specialize in SolidWorks for precise analysis and design of industrial components and assemblies, and I am skilled in preparing models for 3D printing (DFM, SLA, SLS) and rapid prototyping. My core competencies include: • Analysis and Design of Industrial and Automotive Parts with engineering precision • Plastic Injection Mold Design and optimization for 3D printing • Prototyping and Manufacturing Support • Technical Drawings and Engineering Documentation I am committed to delivering high-quality, functional, and production-ready designs that turn client ideas into reality, combining creativity with engineering accuracy. My designs are not only visually appealing but also practical, manufacturable, and cost-effective.

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencie... Read more

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencies and design consultants to produce architectural CGI which is used primarily to communicate design concepts to clients. Working on projects throughout the UK, I provide still imagery, VR and animations to facilitate the marketing and planning requirements of projects, as well as being used as a means of securing project funding and sponsorship. I have over 35 years experience working in a design environment, working with AutoCAD since 1989 & in the mid 1990's I worked as a beta tester for Autodesk and in 1998 had 3D work published in CADdesk magazine. I get most of my work through recommendations, as I put a high value on the quality of work and the ability to hit agreed deadlines. Fees are generally agreed either as a 'fixed fee per project', on a 'daily rate' or 'monthly retainer' for longer term projects.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient c... Read more

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient client communication to identify key targets for products and contracts

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations o... Read more

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations or for real-time applications. As a Fine Art graduate, I am skilled at creating compelling imagery to best illustrate a concept. Currently working full time in-house as a 3D Media Developer for Babcock on a naval contract but seeking other opportunities to utilise my skillset outside of working hours. In my previous roles at Kantar Consulting, I have successfully led real-time projects for bluechip clients including Unilever, L'Oreal, Duracell, Shell, Alliance Japan to name a few. This included managing internal and external resource, scoping out timelines, liaising with the client, and ensuring that the end product met their requirements.

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and... Read more

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and give an individual response to the given project.

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very compet... Read more

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very competitive rates

Industrial Product Designer with experience working in international consultancies and in-house product development team. Proven track record in client facing roles, PR and Communications of design co... Read more

Industrial Product Designer with experience working in international consultancies and in-house product development team. Proven track record in client facing roles, PR and Communications of design concepts to media and retailers.

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for... Read more

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for the client and supplier. I have over 3 years of experience in this field, of which I have spent on multiple projects providing detailed arrangement and manufacturing drawings for components of Steel Rolling Mill Plants. The primary services I provide are: + Mechanical Engineering + 2D/3D CAD Modeling + Detailed Engineering Drawings + Advanced Knowledge of GD&T and Placement + Concept Sketch to Final CAE Design + Intermediate FEA and CFD Analysis (with Report) + Mold/Cavity Design + 3D Rendering + CAD File Conversion I am a highly motivated and enthusiastic Mechanical Design Engineer with a strong background looking to expand my career in the freelancing industry to create a reputable freelancing profile which I can showcase my credibility through the quality of my work. In addition to my CAD expertise, I have a solid educational foundation and a strong passion for engineering and mechanical design that I believe will align well with the clients' set criteria. I am happy to find out how I can assist you in your future projects. Thank you for reading my profile. Akram Abuzakouk.

Jewellery Designer speciallized in CAD/CAM tecnologies. More than 10 years experience working with companies worldwide. - Authorized Rhinoceros Trainer (ART) - BA (Hons)Jewellery and Silversmit... Read more

Jewellery Designer speciallized in CAD/CAM tecnologies. More than 10 years experience working with companies worldwide. - Authorized Rhinoceros Trainer (ART) - BA (Hons)Jewellery and Silversmithing Design for Industry - A.J.P. Accredited Jewelry Professional by Gemmological Institute of America

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience i... Read more

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience in the realm of digital artistry, specializing in mesmerizing 3D modeling and cutting-edge product design. 🎨 Unleashing Creativity with Precision: Armed with an extensive arsenal of CAD programs including Solidworks, Autodesk Inventor, and Fusion 360, I orchestrate symphonies of precision and ingenuity. From conceptual sketches to intricate mechanical designs, I bring visions to reality with meticulous attention to detail. 🔧 Mastering the Tools of Innovation: With a deep-rooted understanding of industry-leading software, I navigate the intricate landscapes of 3D modeling with finesse and expertise. Each project is a testament to my dedication to craftsmanship, as I seamlessly blend artistry with functionality. 🖌️ Sculpting Souls with Digital Brushes: Delving into the realms of Zbrush, Maya, and Blender, I transcend traditional boundaries to sculpt digital masterpieces that captivate the imagination. Whether it's character design, architectural visualization, or cinematic animation, I breathe life into every pixel with passion and precision. 🌐 Bridging Vision with Reality: Collaboration lies at the heart of my process. I work closely with clients, transforming their visions into tangible blueprints and prototypes. Through clear communication and unwavering dedication, I ensure that every project exceeds expectations and delivers unparalleled results. 🚀 Empowering Innovation: In a world driven by innovation, I am committed to pushing the boundaries of what's possible. Whether it's revolutionizing product design, enhancing user experiences, or pioneering new technologies, I embrace challenges with enthusiasm, turning obstacles into opportunities. Embark on a journey of creativity and innovation with me. Together, we'll unlock the full potential of your ideas and shape a future limited only by imagination.

"Visually beautiful and amazing renders. David really came through for us on a tight deadline" I have been working in 3D visualization and architectural modelling for over 4 years, where an increas... Read more

"Visually beautiful and amazing renders. David really came through for us on a tight deadline" I have been working in 3D visualization and architectural modelling for over 4 years, where an increase in quality and rapid delivery have become two of the foremost drivers accelerating the industry forward. Visualization has become one of the most import tools for sales and marketing across all sectors. From architectural designs to product ranges, 3D visualization has the ability to attract new clients and with it drive up your companies sales. Throughout my career I have worked with hundreds of clients across the world with a wide variety of project types and requirements. Drawing on an expansive professional experience in architectural design and computer graphics, I have extensive knowledge in interior and exterior architectural visualization, product rendering and concept imagery. I am an expert in my field and take immense pride in my work! Understanding and respecting your needs and preferences as my client is paramount. I always make sure that the project is completed to the highest standards and to the deadline you require. I would be delighted to collaborate with you on your project and give them the impact they deserve! Best regards, David G.

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which inclu... Read more

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which include: an aerospace landing mechanism, a turboprop propeller with gears and casing, and a Cessna 172 wing with various wing tip designs. Whilst on my 15 month industry placement, working for a precision engineering company, I would use SolidWorks on a daily basis in order to create a 3D model from an engineering drawing. Modifications would often be needed to the model in order for the part to be machinable on the CNC machines.

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with pr... Read more

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with prior experience ranging from the wider automotive field to medical and industrial computer design. Highly experienced working mainly with Solidworks and Autodesk Inventor, but prior experience working with Siemens NX and Autocad.

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to... Read more

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to producing high quality products and mechanical systems.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.