Hire CAD designers & engineers in Rochester, England

"Visually beautiful and amazing renders. David really came through for us on a tight deadline" I have been working in 3D visualization and architectural modelling for over 4 years, where an increas... Read more

"Visually beautiful and amazing renders. David really came through for us on a tight deadline" I have been working in 3D visualization and architectural modelling for over 4 years, where an increase in quality and rapid delivery have become two of the foremost drivers accelerating the industry forward. Visualization has become one of the most import tools for sales and marketing across all sectors. From architectural designs to product ranges, 3D visualization has the ability to attract new clients and with it drive up your companies sales. Throughout my career I have worked with hundreds of clients across the world with a wide variety of project types and requirements. Drawing on an expansive professional experience in architectural design and computer graphics, I have extensive knowledge in interior and exterior architectural visualization, product rendering and concept imagery. I am an expert in my field and take immense pride in my work! Understanding and respecting your needs and preferences as my client is paramount. I always make sure that the project is completed to the highest standards and to the deadline you require. I would be delighted to collaborate with you on your project and give them the impact they deserve! Best regards, David G.

I am currently working as 3D Visualiser at Claremont Group Interiors, in Manchester, UK. On free time, when is raining, I like to spend some time working on a personal project of various rendering wi... Read more

I am currently working as 3D Visualiser at Claremont Group Interiors, in Manchester, UK. On free time, when is raining, I like to spend some time working on a personal project of various rendering with 3ds Max and V-Ray, with the aim to improve and reach a good level in this field. In the past I worked as a graphic designer at the studio graphic Mirus of Macerata, where I worked mainly with InDesign, Photoshop and Illustrator for creating various printing materials and not, I also worked in support of the team for a project 3d rendering for making two Catalogues for a kitchens company.

I am a multi-disciplined engineer with over 30 years’ experience and have been developing novel orthopaedic instruments and implants for over 20 years. I am experienced in designing with both 2D and 3... Read more

I am a multi-disciplined engineer with over 30 years’ experience and have been developing novel orthopaedic instruments and implants for over 20 years. I am experienced in designing with both 2D and 3D CAD; and with over 10 years’ hands on manufacturing experience so can develop conceptual designs through to production with a clear understanding of the requirements for manufacturing.

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

I am an electronic engineer with a first class degree from the University of Southampton. I have worked on a range of projects from Unmanned Aerial Vehicles to electronic medical analysis devices. I... Read more

I am an electronic engineer with a first class degree from the University of Southampton. I have worked on a range of projects from Unmanned Aerial Vehicles to electronic medical analysis devices. I can assist with both hardware and embedded software design with a strong knowledge in embedded C and C++, this includes schematic design and layout design for PCBs, component choice and costings.

A well informed and highly skilled Mechanical Design Engineer with a Marine Engineering background. I am capable of providing Engineering design services in a wide range of industries.

A well informed and highly skilled Mechanical Design Engineer with a Marine Engineering background. I am capable of providing Engineering design services in a wide range of industries.

expert in shop drawing with Tekla Design Opal Mall in Tehran Mana project that was performed in Kerman

expert in shop drawing with Tekla Design Opal Mall in Tehran Mana project that was performed in Kerman

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions... Read more

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions for CAD Design, Building Information Modeling (BIM), Engineering Calculations, Geometric Dimensioning, and Tolerancing, Piping and Instrumentation Diagrams, Block Flow Diagrams, Process Flow Diagram, Annual and Steady-State Building Thermal Analysis, Fluid Flow Analysis, and Finite Element Analysis.

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural ana... Read more

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural analysis.

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machi... Read more

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machine from concept to prototype, and prototype to commercial product. Designed Ultra High Level vacuum systems, Radiation Shielding, Product Handling, Test Rigs, High Voltage Electrical Enclosures etc. I also work for, and have worked for several multinational engineering corporations developing and automating production equipment, test rigs; and am an registered Incorporated Engineer (I Eng) with the Institute of Mechanical Engineers.

Industrial designer with 14 years of turn key design consultancy experience working for some of the top consultancies in both the UK and Australia. My career has spanned all product sectors including... Read more

Industrial designer with 14 years of turn key design consultancy experience working for some of the top consultancies in both the UK and Australia. My career has spanned all product sectors including Consumer, Medical, Industrial, soft goods and Furniture. I work from Brief to finished off tool product and have detailed knowledge of all manufacturing processes. I have spent a lot of time in China perfecting off tool samples to ensure fault free manufacture with various projects. Based in west wales and happy to travel the UK to meet with clients if required.

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies,... Read more

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies, skills include understanding the importance of business acumen and customer service. Possesses a unique cultural background, having been brought up in Kuwait, and as a result excels working in diverse teams and relishes the opportunity to work with clients internationally. Academic studies have helped broaden an understanding of management theory and best-practice within the innovation and new product development space.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and tec... Read more

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and technical data from the shop floor to the design office, I understand fully the standards, materials and egonomics needed to fulfill the specification and requirements of the task. I have a wealth of experince understanding complex mechanical engineering tasks and can validate designs requiring stress (FEA) analysis.

Founder and partner of IDeAMi |www.ideami.eu|. I am a design engineer with 8 years’ experience, specialised in product development in multidisciplinary fields. Passionate about the industrial design... Read more

Founder and partner of IDeAMi |www.ideami.eu|. I am a design engineer with 8 years’ experience, specialised in product development in multidisciplinary fields. Passionate about the industrial design process and product innovation, my skills include: research, development, innovation, materials selection and engineering of products. My experiences allowed me to develop capabilities within the different steps of the design process: product strategy, research and concept innovation idea, parametric three-dimensional modelling, engineering, visualisation with render, prototype model and support to production. I developed innovating products according to the customer’s needs, in collaboration with suppliers and a team of experts in complimentary disciplines. My philosophy is focused on a growing design process, where the idea is the base of a complex development of the product, continuously enhanced by innovation, the choice of novel technologies and solutions for the creation of an excellent product.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustr... Read more

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustrator Blender Reverse engineering from scan data Design for 3D printing 3D scanning Prototyping Ideation Automotive Design CAS Surfacing .STL .Step .STP

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very compet... Read more

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very competitive rates

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and... Read more

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and Moveable Structures. I can provide a focussed extension to your core team that will solve your companies’ problems including; • R&D • Design assessment and prototyping • Engineering drawings • Site surveys • Manufacturing management/improvement • Energy use and sustainability applications • And many more, just get in touch!

Welcome to Infinite Design Solutions 3D (based in the UK), where creativity meets precision. We specialise in computer-aided design, multi-material 3D printing, and PCB design. We are a group of de... Read more

Welcome to Infinite Design Solutions 3D (based in the UK), where creativity meets precision. We specialise in computer-aided design, multi-material 3D printing, and PCB design. We are a group of dedicated mechanical design engineers with extensive experience in delivering high-quality design solutions across various industries. With a strong foundation in CAD (SolidWorks, AutoCAD, etc.) and Finite Element Analysis (FEA), We specialise in creating innovative and optimised designs that meet client needs while maintaining the highest standards of performance and efficiency. Whether it’s simple CAD drawings, concept development, detailed design, or performance analysis, We strive to ensure that every project we undertake not only meets but exceeds expectations.

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

- Architect/Designer/Autocad Drafter/Architectural Designer/CAD Architect/BIM Drafter/BIM Architect -10 years of experience in Design Industry - Specialized in 2D drawings, Autocad, Sketch-up, Revit A... Read more

- Architect/Designer/Autocad Drafter/Architectural Designer/CAD Architect/BIM Drafter/BIM Architect -10 years of experience in Design Industry - Specialized in 2D drawings, Autocad, Sketch-up, Revit Architecure (BIM Modelling), Lumion, Adobe Photoshop & InDesign, - All Microsoft Programs (word, excel etc), Arts and Craft, DIY, Writing etc.

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with g... Read more

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with good sense for proportion, colour and texture.

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - High End Consumer Products - Low-Cost Consumer Products - Power Tools I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Prototyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practiced creative skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.