Hire CAD designers & engineers in Oxford, England

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and... Read more

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and give an individual response to the given project.

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic... Read more

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic enclosures and products that are mechanical in nature. I create 3D models that are parametric, easy to modify and make.

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions... Read more

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions for CAD Design, Building Information Modeling (BIM), Engineering Calculations, Geometric Dimensioning, and Tolerancing, Piping and Instrumentation Diagrams, Block Flow Diagrams, Process Flow Diagram, Annual and Steady-State Building Thermal Analysis, Fluid Flow Analysis, and Finite Element Analysis.

Highly motivated and creative Master's of Mechanical Engineering graduate, with well developed skillset in digital manufacture and a strong academic history, who enjoys the application of CAD software... Read more

Highly motivated and creative Master's of Mechanical Engineering graduate, with well developed skillset in digital manufacture and a strong academic history, who enjoys the application of CAD software to real problems. I have successfully used Solidworks in a number of real world and academic projects. Extensive design work includes development of a wave powered marine marker buoy for use in rough seas to the design of a community slow sand water filtration device in a small town in Nothern Peru. Additionally, I have several years of experience using Autodesk Inventor, which I use primarily for personal projects. If you are interested in other things I have designed and implemented, or if you want to know more about my experience please don't hesitate to contact me.

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which inclu... Read more

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which include: an aerospace landing mechanism, a turboprop propeller with gears and casing, and a Cessna 172 wing with various wing tip designs. Whilst on my 15 month industry placement, working for a precision engineering company, I would use SolidWorks on a daily basis in order to create a 3D model from an engineering drawing. Modifications would often be needed to the model in order for the part to be machinable on the CNC machines.

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but h... Read more

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but have experience of many areas relating to product design.

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and... Read more

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and Revit.

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to... Read more

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to producing high quality products and mechanical systems.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - Consumer Hardware Products I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Protoyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practised skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

Straight after his Graduation in MSC Mechanical Engineering Design, Damien Gicquel launched his own Product Design Company. His work with companies from various backgrounds gave him a flavour of the w... Read more

Straight after his Graduation in MSC Mechanical Engineering Design, Damien Gicquel launched his own Product Design Company. His work with companies from various backgrounds gave him a flavour of the wide and varied requirements that customers face from all types of different industries. DG Design intends to provide all customers with the level of support required to reach their goal. Through communicating the desired objectives in detail, we can provide a bespoke solution for each and every requirement – ensuring that the client is at the forefront of our attention.

Innovative Mechanical Engineer passionate about Product Design, Manufacturing and Testing strategy, bringing 4+ years of experience putting integrity at the heart of project. A 3D printing and CNC mac... Read more

Innovative Mechanical Engineer passionate about Product Design, Manufacturing and Testing strategy, bringing 4+ years of experience putting integrity at the heart of project. A 3D printing and CNC machining enthusiast. Possess strong technical, analytical, and practical skills and is detail-oriented, time-focused, consistently delivering, having technical and practical knowledge and a team player. Strong aptitude in fundamentals of mechanical engineering and 3D modelling using SolidWorks, NX, Blender, and Fusion360, FEA Using ABAQUS and ANSYS Structural, CFD using Fluent, and knowledge of Python and MATLAB. Previous academic and work experience has enabled the development of outstanding communication skills with fluency in technical writing.

Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creatin... Read more

Having graduated from university with a product design qualification I established myself as a freelance designer helping companies and individuals develop their products and ideas into 3D and creating parts ready for manufacture or prototype. Two years ago I co-foundered a technical design agency offering creative and technical support. We've worked with some big names such as Samsung, Lotus, Dyson, Courvoisier, Pelican, and Softbox to help develop point of sale stands, and product ranges. We use the latest CAD software to develop our models mainly utilising SolidWorks to create technical models, drawings and renders.

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very compet... Read more

- CAD Skills across multiple platforms - Knowledge of Manufacturing Processes -Russell Group University Student - Just getting started on here, looking to build a portfolio, so will offer very competitive rates

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience i... Read more

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience in the realm of digital artistry, specializing in mesmerizing 3D modeling and cutting-edge product design. 🎨 Unleashing Creativity with Precision: Armed with an extensive arsenal of CAD programs including Solidworks, Autodesk Inventor, and Fusion 360, I orchestrate symphonies of precision and ingenuity. From conceptual sketches to intricate mechanical designs, I bring visions to reality with meticulous attention to detail. 🔧 Mastering the Tools of Innovation: With a deep-rooted understanding of industry-leading software, I navigate the intricate landscapes of 3D modeling with finesse and expertise. Each project is a testament to my dedication to craftsmanship, as I seamlessly blend artistry with functionality. 🖌️ Sculpting Souls with Digital Brushes: Delving into the realms of Zbrush, Maya, and Blender, I transcend traditional boundaries to sculpt digital masterpieces that captivate the imagination. Whether it's character design, architectural visualization, or cinematic animation, I breathe life into every pixel with passion and precision. 🌐 Bridging Vision with Reality: Collaboration lies at the heart of my process. I work closely with clients, transforming their visions into tangible blueprints and prototypes. Through clear communication and unwavering dedication, I ensure that every project exceeds expectations and delivers unparalleled results. 🚀 Empowering Innovation: In a world driven by innovation, I am committed to pushing the boundaries of what's possible. Whether it's revolutionizing product design, enhancing user experiences, or pioneering new technologies, I embrace challenges with enthusiasm, turning obstacles into opportunities. Embark on a journey of creativity and innovation with me. Together, we'll unlock the full potential of your ideas and shape a future limited only by imagination.

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mi... Read more

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mixture of experience, problem solving and creativity — that’s why we love it. Have a look around the website to see what we do and if you have a prototype that needs building or a product that needs designing, don’t hesitate to get in touch.

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations o... Read more

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations or for real-time applications. As a Fine Art graduate, I am skilled at creating compelling imagery to best illustrate a concept. Currently working full time in-house as a 3D Media Developer for Babcock on a naval contract but seeking other opportunities to utilise my skillset outside of working hours. In my previous roles at Kantar Consulting, I have successfully led real-time projects for bluechip clients including Unilever, L'Oreal, Duracell, Shell, Alliance Japan to name a few. This included managing internal and external resource, scoping out timelines, liaising with the client, and ensuring that the end product met their requirements.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and... Read more

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and Moveable Structures. I can provide a focussed extension to your core team that will solve your companies’ problems including; • R&D • Design assessment and prototyping • Engineering drawings • Site surveys • Manufacturing management/improvement • Energy use and sustainability applications • And many more, just get in touch!

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

Hi there! I'm an 18 year old self taught hard surface modeller from London who's aspiring to work in the vfx industry upon completing my portfolio. I very much enjoy 3D modelling and using kit-bash as... Read more

Hi there! I'm an 18 year old self taught hard surface modeller from London who's aspiring to work in the vfx industry upon completing my portfolio. I very much enjoy 3D modelling and using kit-bash assets to create renders of my own. Right now I mainly use blender for my 3D models, as that's the 3D modelling software i'm most proficient in, however I am slowly transitioning to using Maya and Arnold for some of my renders. Feel free to contact me if you have any queries or proposals!

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient c... Read more

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient client communication to identify key targets for products and contracts

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustr... Read more

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustrator Blender Reverse engineering from scan data Design for 3D printing 3D scanning Prototyping Ideation Automotive Design CAS Surfacing .STL .Step .STP

An adaptable and innovative qualified Mechanical Engineer with over 9 years experiences creating cost efficient designs, who enjoys being part of, as well as leading, a successful and productive team.... Read more

An adaptable and innovative qualified Mechanical Engineer with over 9 years experiences creating cost efficient designs, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on her own initiative and can demonstrate the high levels of motivations required to meet the tightest of deadlines. Even under significant pressure, possesses a strong ability to perform effectively.

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem sol... Read more

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem solving, multi-tasking, prioritising and maintaining peace are what comes naturally. Projects focused on people and planet are held close to heart and are brought to life through a diverse skill set in project management software and creative suites. A multi-disciplinary approach and passion for design has led Mirrin to be an expert in Graphic Design, Illustration, Product 3D Modelling, 3D Rendering and Animation, Architectural and Interior Design, CAD Drafting and Documentation.