Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Compu... Read more

Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Computer-Aided Design (CAD), Revit MEP, and Drawing. Strong engineering professional with a B.SC focused in Mechanical engineering from Higher Technological Institute

Revit MEP modeling HVAC shop drawings Firefighting design BIM coordination • BIM Modeling • MEP Coordination • HVAC/Plumbing/FF Design • Shop Drawings • Technical Office Support • Clash Detection & Co... Read more

Revit MEP modeling HVAC shop drawings Firefighting design BIM coordination • BIM Modeling • MEP Coordination • HVAC/Plumbing/FF Design • Shop Drawings • Technical Office Support • Clash Detection & Coordination

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOL... Read more

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOLIDWORKS) Systems with all available software (AUTOCAD , REVIT, SOLIDWORKS) And All Calculations -- MY Skills 1- HVAC design and software (Preparation & review of design, construction/execution and shop drawings, Design reports, Project Specifications and any other necessary documents pertaining to the design and construction of HVAC (Heating Ventilating and Air Conditioning) System,Create layout for equipment, ducting and piping of Heating, Ventilating and Air Conditioning (HVAC) System including sizing of pipes and ducts) - I use all international codes such as ( Ashrae , NFPA, UPC, IPC, UPC ,ASPE, SMACNA other International design codes) 2- Plumbing & Fire Fighting ( Designing, Shop Drawing, As Built drawing and Supervision services related to Plumbing, Firefighting systems ) 3- Duct and All HVAC , MEP Take off and Estimating 4- Simulation (Ventilation Using Ventsim Software , Hydraulic and Pneumatic Using FluidSim Software) 5-digital logic design 6- Convert PDF , JPG,Sketch to dwg or Rvt (AUTOCAD , REVIT) 7- Technical Reports (Cooling and Heating Loads reports , Ventilation Reports , External static pressure ,heat transfer , fluid mechanics , thermodynamics) 8- tutorial (HVAC , FIREFIGHTING , PLUMBING , DESIGN DRAWING , SHOP DRAWING , AUTOCAD , MEP , ARCH , REVIT , PHYSICS ,THERMODYNAMICS , HEAT TRANSFER , FLUID MECHANICS , MATHS,Dynamics,Hydraulics and Pneumatics,Calculus I- II,Differential Equations) ---- My Software Skills 1- Autodesk AutoCAD 2- Autodesk AutoCAD MEP ,ARCH 3- Autodesk Revit 4- Mechanical Ventilation Simulator (VentSim) 5-Hap program 6- Ductsizer 7- Elite programs 8-Pump Selection Software ( Dp selector , and Grundfos , KSP online selection) 9- Pump Sizing and pump Calculator 10- Autofluid 11- pipesizer 12- Microsoft office Software 13- Bluebeam 14 - SOLIDWORKS

I am a result-oriented Mechanical BIM Specialist with over 4 years of experience in the EPC of HVAC, Firefighting, and Plumbing systems. I specialize in bridging the gap between engineering design and... Read more

I am a result-oriented Mechanical BIM Specialist with over 4 years of experience in the EPC of HVAC, Firefighting, and Plumbing systems. I specialize in bridging the gap between engineering design and site execution through high-fidelity Revit MEP modeling (LOD 300-400). Having successfully managed BIM deliverables for complex medical facilities and industrial projects (such as GASCO and Art Academy Hospital), I have a proven track record of reducing on-site rework by 20% through proactive clash detection in Navisworks. Core Expertise: Advanced Modeling: Expert-level Revit MEP for HVAC, Firefighting, and Plumbing. Clash Management: Professional coordination using Navisworks Manage to prevent site delays. Technical Engineering: Solid knowledge of international codes including NFPA (13, 14, 20, 22, 92), ASHRAE, and IPC. Technical Office: Accurate BOQs, Automated Schedules, and Fabrication-ready Shop Drawings. My goal is to ensure your project is 100% compliant and clash-free before construction begins, saving both time and budget.

I am an HVAC Engineer experienced in Revit MEP modeling and mechanical system design. I can create HVAC layouts, duct routing, equipment schedules, and shop drawings with accurate coordination with ot... Read more

I am an HVAC Engineer experienced in Revit MEP modeling and mechanical system design. I can create HVAC layouts, duct routing, equipment schedules, and shop drawings with accurate coordination with other disciplines. Services I provide: • HVAC design and duct layout • Revit MEP mechanical modeling • HVAC shop drawings • BOQ preparation • Coordination with architectural and structural models

Electrical BIM Engineer with experience in Lighting, Power, and Light Current systems modeling, coordination, shop drawings, tendering, and as-built documentation. Skilled in Revit, Navisworks, AutoCA... Read more

Electrical BIM Engineer with experience in Lighting, Power, and Light Current systems modeling, coordination, shop drawings, tendering, and as-built documentation. Skilled in Revit, Navisworks, AutoCAD and DIALux software. Experienced in multidisciplinary coordination (Architectural, Structural, and MEP) and delivering accurate construction documentation in compliance with project specification.

As a passionate Electrical Design Engineer with a strong foundation in circuit design, power systems, and CAD tools, I thrive on transforming complex technical challenges into innovative, efficient so... Read more

As a passionate Electrical Design Engineer with a strong foundation in circuit design, power systems, and CAD tools, I thrive on transforming complex technical challenges into innovative, efficient solutions. With hands-on experience in designing electrical layouts for residential, commercial, and industrial projects, I bring precision, creativity, and reliability to every design I produce. My expertise spans AutoCAD Electrical, ETAP, and Revit MEP, and I’m deeply committed to staying ahead of industry trends—whether it's integrating renewable energy systems or optimizing designs for sustainability and cost-effectiveness. I collaborate seamlessly with multidisciplinary teams, ensuring that every project meets safety standards, client expectations, and regulatory requirements.

Electrical Power Engineer specializing in Electrical Distribution Design, Lighting Design, and MEP Systems. Experienced in Load Estimation, Cable & Breaker Sizing, Voltage Drop Calculations, Single Li... Read more

Electrical Power Engineer specializing in Electrical Distribution Design, Lighting Design, and MEP Systems. Experienced in Load Estimation, Cable & Breaker Sizing, Voltage Drop Calculations, Single Line Diagrams (SLD), and Lighting Design using DIALux Evo. Proficient in AutoCAD and familiar with IEC and NFPA standards. Passionate about delivering accurate, efficient, and cost-effective electrical designs with attention to quality and detail.

I work as a MEP engineer, i design HVAC, Plumbing and Fire Fighting projects. I also has a part time job as a CNC designer, i mainly design doors, curtain holders and decorations for router machines 1... Read more

I work as a MEP engineer, i design HVAC, Plumbing and Fire Fighting projects. I also has a part time job as a CNC designer, i mainly design doors, curtain holders and decorations for router machines 1220x2440mm.

Senior Civil Engineer | Project Management & Technical Due Diligence Specialist With over 20 years of professional experience in the engineering and construction sectors, I specialize in delivering h... Read more

Senior Civil Engineer | Project Management & Technical Due Diligence Specialist With over 20 years of professional experience in the engineering and construction sectors, I specialize in delivering high-stakes site development and infrastructure solutions. Having successfully managed complex projects in both the Gulf region and across the United States, I bring a unique blend of global project management rigor and localized expertise in U.S. building codes, zoning regulations, and regulatory compliance. My Core Expertise: Site Development & Feasibility: Expert in pre-acquisition due diligence, including grading analysis, stormwater drainage, utility capacity screening, and topographic assessment (LIDAR). Structural & MEP Coordination: Highly proficient in foundation design, roof framing, shear wall scheduling, and comprehensive MEP documentation (load calculations, plumbing risers, and HVAC scheduling). Technical Proficiency: Advanced user of AutoCAD Civil 3D, Revit, Primavera P6, and GIS tools. I specialize in turning raw data into client-ready, stamped-ready exhibits and constraint maps. Regulatory & Compliance: Proven track record in navigating FEMA floodplain amendments, R-4/R-2 zoning compliance, construction vibration analysis, and commercial permit resubmittals in jurisdictions from California to Oklahoma. Why Work With Me: I operate as a dedicated expert who prioritizes precision, clear communication, and rapid turnaround times. Whether you need a comprehensive feasibility study, an amendment to an existing plan, or a full-package submittal for a residential or utility-scale project, I provide the technical depth of a firm with the personalized, direct service of a single-point expert. I don’t just draw plans; I solve technical roadblocks before they become project-killers. I am committed to producing work that is not only code-compliant but also optimized for efficiency and cost-effectiveness. Let’s discuss your project requirements today.

I am a Senior Mechanical Engineer with over 7 years of experience in MEP systems, specializing in HVAC, firefighting, plumbing, and infrastructure projects. I have strong experience in both technical... Read more

I am a Senior Mechanical Engineer with over 7 years of experience in MEP systems, specializing in HVAC, firefighting, plumbing, and infrastructure projects. I have strong experience in both technical office and site execution, which allows me to deliver practical, accurate, and fully coordinated designs. I have worked on large-scale projects including commercial malls, factories, warehouses, and hospitality buildings. 🔹 My Services Include: HVAC Design & Shop Drawings Firefighting & Plumbing Systems MEP Coordination (Clash Detection) Quantity Take-off & Material Submittals As-built Drawings Technical Reports & Documentation I am committed to delivering high-quality work, meeting deadlines, and maintaining clear communication with clients.

I am a Technical Office Engineer with expertise in MEP system design and shop drawings, specializing in HVAC, firefighting, and plumbing. With hands-on experience in AutoCAD, Revit, and Navisworks, I... Read more

I am a Technical Office Engineer with expertise in MEP system design and shop drawings, specializing in HVAC, firefighting, and plumbing. With hands-on experience in AutoCAD, Revit, and Navisworks, I create precise and efficient designs that meet industry standards. Skills & Expertise: ✔️ MEP System Design (HVAC, Firefighting, Plumbing) ✔️ BIM Modeling & Clash Detection (Revit, Navisworks) ✔️ Shop Drawings & Technical Documentation ✔️ 2D & 3D Drafting (AutoCAD) ✔️ Coordination with Engineers & Contractors I am dedicated to delivering high-quality, detail-oriented designs that enhance project efficiency. Let’s work together to bring your project to life!

Hello, This is Ahmed Aboalalla, a Mechanical Engineer specializing in MEP (Mechanical, Electrical, and Plumbing) works for facilities and residential buildings. My primary specialization is in HVAC... Read more

Hello, This is Ahmed Aboalalla, a Mechanical Engineer specializing in MEP (Mechanical, Electrical, and Plumbing) works for facilities and residential buildings. My primary specialization is in HVAC (Heating, Ventilation, and Air Conditioning). I am proficient in designing various ventilation and air conditioning systems using AutoCAD and Revit. I am also skilled in utilizing supplementary software to support AutoCAD designs, such as the HAP 4.9 program for calculating thermal loads and the McQuay Duct Sizer program for designing ductwork measurements. Furthermore, I am adept at reading and utilizing all ASHRAE standards for thermal load calculations, as well as equipment selection catalogs for mechanical hardware, including both air conditioning units and ductwork components like Volume Dampers and Diffusers. I am also capable of performing quantity surveying and preparing Bills of Quantities (BoQ). I maintain a flexible work system and possess a large database relevant to various countries, which enables me to work easily within the requirements of your specific jurisdiction. This will help reduce your workload and costs, as it will also simplify the process of sourcing required resources from local suppliers. Contact me, and let's begin immediately. Best regards,

Over 20 years of experience in Engineering and Construction Management, with a proven track record of successfully delivering complex multidisciplinary projects. Expert in project deliverables managem... Read more

Over 20 years of experience in Engineering and Construction Management, with a proven track record of successfully delivering complex multidisciplinary projects. Expert in project deliverables management and coordination across all engineering disciplines. Possess extensive technical knowledge in the design and execution of Fossil Power Plants, PV Power Plants, Electrical substation, Oil & Gas Facilities, Petrochemical and Chemical Plants, Ammonia and Water Treatment Plants, Wastewater Treatment and Desalination Plants, as well as Green Hydrogen Generation Facilities. Highly skilled in the detailed design of Logistics and Industrial Warehouses, Residential Compounds, and large-scale Agricultural Development Projects. Managing FEED and detailed engineering plant design from the initiation of the site layout (Master Plan) and area general arrangement drawings through to piping design for both aboveground and underground systems. Responsibilities include overseeing the design and integration of steam/water critical piping, firefighting and protection systems, liquid oil and gas fuel systems, and infrastructure utilities storm water drainage ,sewage waste, Drinking water and Roads to ensure full compliance with project specifications, codes, and standards.Review and approve equipment and tank layouts and sketches, ensuring compliance with project requirements and standards. Perform various duties across the bidding, planning, design, and construction phases of relevant projects. Collaborate with Process Licensors including reviewing and marking up P&IDs, Architect, civil, instrumentation, and electrical drawings. review Bills of Quantities (BOQs) and participate in all project-related meetings with clients and project teams. Apply high-level expertise in engineering codes and standards to ensure project compliance and technical excellence. Proficient in creating and reviewing 3D models using multiple software packages, including MicroStation, Plant 3D, AutoCAD, Smart Plant 2D/3D, Aveva E3D, Revit Architecture, Revit MEP, Inventor, SketchUp, Lumion and Camtasia for presentations. Demonstrated strong technical and managerial capabilities throughout extensive project experience. Responsible for recruiting and mentoring junior engineers and staff to build a skilled team that effectively supports organizational objectives and project requirements. Monitor and support the construction phase by providing guidance and assistance to the responsible project teams, ensuring adherence to design specifications, quality standards, and project timelines.

We are a team of specialized engineers working with a strong spirit of teamwork to execute and manage a variety of projects, including residential, commercial, and administrative buildings. We rely on... Read more

We are a team of specialized engineers working with a strong spirit of teamwork to execute and manage a variety of projects, including residential, commercial, and administrative buildings. We rely on advanced design tools such as AutoCAD and Revit to provide integrated engineering solutions. We offer comprehensive services covering all stages of the project, starting from tendering and cost estimation, through architectural and structural design (concrete and steel structures), MEP systems, and preparation of shop drawings, all the way to coordination works and the application of the BIM methodology with Levels of Development (LOD) ranging from 200 to 300, ensuring the highest standards of quality and accuracy in execution

I’m a freelance MEP Draftsman with 2 years of hands-on experience delivering code-compliant, high-quality shop drawings for HVAC, Plumbing, and Firefighting systems using AutoCAD and Revit. I prepare... Read more

I’m a freelance MEP Draftsman with 2 years of hands-on experience delivering code-compliant, high-quality shop drawings for HVAC, Plumbing, and Firefighting systems using AutoCAD and Revit. I prepare precise construction and coordination drawings tailored for contractors and consultants, ensuring seamless integration with architectural and structural layouts

Results-driven BIM Infrastructure Engineer with extensive experience in infrastructure design, BIM modeling, and interdisciplinary coordination. Proficient in Revit, Civil 3D, Dynamo, Navisworks, an... Read more

Results-driven BIM Infrastructure Engineer with extensive experience in infrastructure design, BIM modeling, and interdisciplinary coordination. Proficient in Revit, Civil 3D, Dynamo, Navisworks, and Sofistik, with a proven track record in clash detection, structural analysis, and reinforcement detailing. Skilled in leveraging BIM workflows to optimize project delivery, ensure compliance with industry standards, and improve collaboration between architectural, structural, and MEP teams. Seeking to contribute expertise in BIM technology and infrastructure engineering to deliver high-quality, sustainable, and cost-effective projects.

I am a mechanical engineer with very good background in design of air conditioning systems, I am familiar with design programs such as autocad.

I am a mechanical engineer with very good background in design of air conditioning systems, I am familiar with design programs such as autocad.

Have five years of experience in the field of Electromechanical, specifically BMS, HVAC, Firefighting, and technical coordination between all construction disciplines, my experience in these sectors i... Read more

Have five years of experience in the field of Electromechanical, specifically BMS, HVAC, Firefighting, and technical coordination between all construction disciplines, my experience in these sectors including designing and shop drawing.Have excellent skills in all technical programs needed in MEP works like (Autocad, Revit, Ductsizer, Elite, HAP, Calculations excel sheets, ...etc.) these are the following of my accomplishments : - ACA project in New Capital o Accomplished the following: Technical disciplines coordination and HVAC shop drawing and Calculations for basement of whole project. As built drawings for Main building. BMS Shop drawing and selection of wires, trays, trunks and panels for admin building, conference hall building and basement. - Sports Covered Hall project in 6’October o Accomplished the BMS Shop drawing and selection of wires, trays, trunks and panels. -High Rise Residential Project in UAE o Accomplished the HVAC shop drawing and Calculations. -Badr Taxes Authority Project in Badr City o Accomplished the BMS shop drawing and selection of wires, trays, trunks and panels. -University Project in Saudi Arabia o Accomplished the HAVC design for admin buildings. -CIB Project in New Capital o Accomplished the BMS shop drawing and selection of wires, trays, trunks and panels. -Four Seasons Hotel Project in Egypt o Accomplished the Fire Fighting System shop drawing and pumps calculations and selection. -UTOPIA Factory Project in Egypt o Accomplished the HVAC shop drawing and calculations and technical disciplines coordination.

Experienced Mechanical Engineer specialized in Building Services Engineering with a demonstrated history of working in the design of HVAC, Fire Protection, and Plumbing systems for different Building... Read more

Experienced Mechanical Engineer specialized in Building Services Engineering with a demonstrated history of working in the design of HVAC, Fire Protection, and Plumbing systems for different Building and Construction projects in multiple countries. Highly skilled in Revit MEP, AutoCAD, ANSYS Fluent, and Computational Fluid Dynamics (CFD). Strong professional with Master of Science (M.Sc.), from Cairo University, focused in CFD Analysis of Thermal Comfort in Outdoor Spaces Using Passive Air Conditioning Techniques.

As a Mechanical Power Engineer specializing in the design of MEP systems including firefighting, fire alarm, and piping systems, along with pipe design engineering, I bring extensive expertise in opti... Read more

As a Mechanical Power Engineer specializing in the design of MEP systems including firefighting, fire alarm, and piping systems, along with pipe design engineering, I bring extensive expertise in optimizing piping designs for efficiency while ensuring compliance with industry standards. I am proficient in using design software such as AutoCAD, Revit, Plant 3D, Fire Elite and Pipe Net

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct... Read more

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct sizing, equipment selection, shop drawings, and HVAC system design using AutoCAD, Revit MEP, and HAP. Committed to delivering accurate, efficient, and code-compliant designs on time

Electrical engineer with an MSc in Smart Grid Engineering and hands-on experience across power systems, power electronics, energy storage, and PV system design. I work with converter topologies (MMC,... Read more

Electrical engineer with an MSc in Smart Grid Engineering and hands-on experience across power systems, power electronics, energy storage, and PV system design. I work with converter topologies (MMC, SST), battery modeling, grid simulation, and PCB layout. My background spans both research and applied engineering — from prototype development and hardware commissioning to technical documentation and system validation. Services I offer: power system modeling and simulation (MATLAB/Simulink, PVsyst, HOMER Pro), circuit and PCB design (Eagle CAD), converter and power electronics design, PV system sizing and performance analysis, basic FPGA implementation, technical report writing, and engineering documentation. I hold MathWorks credentials in signal processing, control design, machine learning, and deep learning. Published in IEEE (CPERE, MEPCON) and IWCMC, with an international patent (WO2021074907A1) for a solar PV paver system.

I am an Architectural Draftsman specializing in Shop Drawings, CAD, and Revit Modeling, with experience on projects in Saudi Arabia & UAE. I provide accurate, construction-ready drawings for ceilings... Read more

I am an Architectural Draftsman specializing in Shop Drawings, CAD, and Revit Modeling, with experience on projects in Saudi Arabia & UAE. I provide accurate, construction-ready drawings for ceilings, partitions, gypsum, aluminum, joinery, and architectural works. I convert sketches/PDFs into precise CAD or Revit models and ensure full coordination with MEP & Structural. Why choose me: fast delivery, clean professional drawings, and excellent communication. Available for freelance/remote projects and ready to start immediately