I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufac... Read more

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufactured Product.

Mechanical design engineer, CSWP from SOLIDWORKS. I have experience working with sheet metal parts, electrical panels, and transformers. Excellent knowledge in CAD using Solidworks, freecad, and ren... Read more

Mechanical design engineer, CSWP from SOLIDWORKS. I have experience working with sheet metal parts, electrical panels, and transformers. Excellent knowledge in CAD using Solidworks, freecad, and rendering using Visualize and Blender

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

professional designer and detailer for steel structures. finite element modelling by Abaqus and Ansys. M.sc in civil engineering,steel structures designed several projects in Egypt and Qatar such as p... Read more

professional designer and detailer for steel structures. finite element modelling by Abaqus and Ansys. M.sc in civil engineering,steel structures designed several projects in Egypt and Qatar such as phosphat factory in El-Sokhna, new building in faculty of commerce, Ain Shams. The Dome of Parliamen in New capital. shop drawing for PLACE VENDOME ,LUSAIL - QATAR ENTERTAINMENT CITY. Structural Design and shop drawing for PEB projects

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corrid... Read more

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corridor, Aswan corridor, 26 July corridor and Elhadarat extension corridor. Having a respectfully experience in design and analysis manually and by using softwares that based on FEM as SAP, SAFE,ETABS,CSI column (CSI package), Midas , and a simple knowledge about Ram ,and BEM as (plpak), in addition to modelling and drafting software as CAD and REVIT. With a valuable knowledge in many codes as ECP,AASHTO LRFD, EUROCODE , and ASCE .

I am mechanical engineer, I have experience in robotics designs and softwares to control use Robotics operating system ROS and PIC microcontroller development and programing.

I am mechanical engineer, I have experience in robotics designs and softwares to control use Robotics operating system ROS and PIC microcontroller development and programing.

Mechatronics Engineer deals with: -SOLIDWORKS ( Sheet metals, 3D modeling , Simulation) -ANSYS -MATLAB -PLC

Mechatronics Engineer deals with: -SOLIDWORKS ( Sheet metals, 3D modeling , Simulation) -ANSYS -MATLAB -PLC

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conduct... Read more

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conducting finite element analysis (FEA) using AUTODESK FUSION 360, drawing and preparing LAYOUT drawings. I'm currently working as a piping design engineer for a consultancy firm, responsible for producing P&ID's, ISO's, GA's and plot plan drawings. I contributed in projects for a reputable companies like ExxonMobil, ESSO, Chevron,.. I carried out my tasks using software programs like: AUTOCAD PLANT 3D, AUTODESK FUSION 360, AUTOCAD, DRAFTSIGHT, AVEVA PDMS,

Hello, my name is Osama Mohamed, and I am a mechanical design engineer with extensive experience in the field. I am currently working full-time as a Product Development Engineer at an Automotive OEM c... Read more

Hello, my name is Osama Mohamed, and I am a mechanical design engineer with extensive experience in the field. I am currently working full-time as a Product Development Engineer at an Automotive OEM company. I specialize in CAE and have expertise in using SolidWorks, Siemens PLM, and ANSYS software. For CFD, FEA, FSI, Transient Structural, and Rigid Dynamics simulations, I use ANSYS and SimCenter tools. Additionally, I am proficient in using MATLAB and Amesim for model-based simulations, and I have excellent skills in using KeyShot for rendering. I have worked on numerous projects, some of which were presented as part of a design report. While this profile is relatively new, you can find samples of my work on this page to get a simple idea of my capabilities. If you are looking for a professional mechanical design engineer who can deliver high-quality work, please do not hesitate to contact me. I am passionate about my work and would be delighted to work with you on your project. Thank you for taking the time to review my profile, and I look forward to hearing from you soon.

Worked as a design in the Ain Shams university racing team and participated in the Shell Eco-Marathon competition in Asia by designing, building, and manufacturing an ICE (Internal combustion Engine V... Read more

Worked as a design in the Ain Shams university racing team and participated in the Shell Eco-Marathon competition in Asia by designing, building, and manufacturing an ICE (Internal combustion Engine Vehicle) with the most fuel efficiency (248.5 Km/L). Start my team (Azhar racing team) at my university (Al-Azhar University). participated twice in EVER in Egypt by designing, building, and manufacturing urban electric vehicles. I was awarded in 2022 with 2nd place in the design competition.

3 years of experience offline. Mechanical Engineering Student. Can work on Solidworks, AutoCAD, and Catia.

3 years of experience offline. Mechanical Engineering Student. Can work on Solidworks, AutoCAD, and Catia.

I’m shady. 26 years. Mechanical Power Engineer. I graduated from Ain Shams University in Cairo 2015. I work in the Arab Contractors Company as a maintenance Engineer for cooling and air condition... Read more

I’m shady. 26 years. Mechanical Power Engineer. I graduated from Ain Shams University in Cairo 2015. I work in the Arab Contractors Company as a maintenance Engineer for cooling and air conditioning systems at its headquarters in Cairo. I use SolidWorks and AutoCAD. I spend my free time in designing machine parts and three-dimensional models to increase my income.