CAD Designers in Ecuador

Seasoned BIM Manager and Revit Expert in Architecture, Structural & MEP disciplines; I am a Civil Engineer & Construction Manager and specialize in BIM modeling for Design Permits, Architectural Desig... Read more

Seasoned BIM Manager and Revit Expert in Architecture, Structural & MEP disciplines; I am a Civil Engineer & Construction Manager and specialize in BIM modeling for Design Permits, Architectural Design & Permits, Plumbing Permits, Electrical Calculations & Permit, HVAC Permits, Manual J. Manual S, Manual D calculations, Construction Coordination, Estimating, Scheduling of Residential and Commercial projects in USA (CA, TX, CO, NJ, FL, GA, AZ, NV, ME) code based projects through Design, Permitting and Construction phases. What I do: Architectural, Structural and MEP Design, Modeling and BIM management; Construction Simulation Analysis, Detailing, Quantity Takeoffs, Plans, Clash detection/Coordination, Interior Design, Topographic and Landscape Modeling, Point Cloud modeling, Engineering Design/Development, Renderings and MORE! Autodesk Revit, BIM360 Workflow Management, Navisworks, Dynamo, BEXEL Manager, AutoCAD, Civil 3D, RSmeans, Enscape, Unreal Engine, Twinmotion, MS Project, Primavera P6, Google Sites, Google Cloud Suite. About me: Andres is an Ecuadorian with some multi-cultural experience, he lived in Ecuador where he got his Civil Engineering degree and went through a 4 years’ experience in low-income multifamily projects of over 1,200 homes design & construction. Then, motivated by management and construction issues he moved to USA to study his Master of Construction Management at the University of Florida, where he also got a research assistant position and worked on government and commercial projects using BIM. From there onwards he embraced the BIM world and dedicated on innovating design, management and research towards a futuristic construction environment. He became a professor in the University Espiritu Santo(UEES) in Guayaquil-Ecuador teaching a master program in BIM and Construction management, while at the same time working as a start up in projects throughout California, Colorado and Texas. He has diverse range of professional experiences including design, consulting and civil construction, Structural engineering and Building construction; experienced in project management and BIM management. My academic profile: Civil Engineer, Master of Construction Management at University of Florida. (Go Gators!) Professor at UEES and UCSG universities on BIM management and Construction Management courses. What my clients say: "Mr. Andres Cedeno Tutiven is Great and Easy to Work with! Went the extra miles without even asking! Will use him again very soon. Thanks Again!" -Lloyd Doucette "Job well done - I would use Andres again." -Allan Virenfeldt

"Driven by a lifelong passion for both artistic drawing and vector technical design, I pursued a career in architecture. My expertise lies in creating high-quality architectural drawings, designs, and... Read more

"Driven by a lifelong passion for both artistic drawing and vector technical design, I pursued a career in architecture. My expertise lies in creating high-quality architectural drawings, designs, and perspectives. Through collaborative projects with colleagues, I have consistently refined my skills in key software for 2D drafting, 3D modeling, and visualization in architecture, construction, and landscaping. I am dedicated to using my digital design abilities to contribute to new projects."

I am mechanical/Piping design engineer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mechanical and hydraulic syst... Read more

I am mechanical/Piping design engineer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mechanical and hydraulic systems. My Skills: - Mechanical design with Autodesk Inventor. - Structural design with Advance Steel. - Pressure vessel design under ASME SECTION VIII DIV 1 with AUTOPipe Vessel. - Atmospheric storage tank design based on API 650 and API 12F with AMETank. - Design of process piping, cross-country piping, and gas distribution based on ASME B31.3, B31.4, B31.8, and industrial plants with AutoCAD Plant 3D and Pipe Flow Expert. - Flexibility analysis and pipe stress calculation with CESAR II. I am dedicated to the design, modeling, and drawing of mechanical equipment such as flares, skids, shelters, handrails, ladders, storage tanks, KOD, vessels, scrubbers, silos, metal structures, industrial plants, flexibility analysis, and pipe stress loads.

I work in Blender and can make complex organic and hard surface models, fixtures or contraptions, with high precision and print ready. But mostly I work making artistic things like sculptures or relie... Read more

I work in Blender and can make complex organic and hard surface models, fixtures or contraptions, with high precision and print ready. But mostly I work making artistic things like sculptures or reliefs. I used to work for jewelers, hobbyists, engineers. Sometimes engineers need my help due to the limitations of parametric software. In mesh editing software we can produce complex and organic shapes much easier and faster.

Magister in Project Management Design and build architectural projects Improve technical constructions

Magister in Project Management Design and build architectural projects Improve technical constructions

I consider myself creative, focused on results, and encouraged to find practical and fulfilled solutions. I graduated as Mechanical Engineer at EPN Ecuador´s University, and I finished my M. Sc. deg... Read more

I consider myself creative, focused on results, and encouraged to find practical and fulfilled solutions. I graduated as Mechanical Engineer at EPN Ecuador´s University, and I finished my M. Sc. degree in Transportation at BME Budapest, Hungary University. As highlighted accomplishments I can mention Quito, and Mashpi Lodge Cable Car Mechanical system development. Also FEA analysis projects in Rig Oil extraction Substructures for CCDC Chinese Company projects. Finally, I can mention 3 years working as a lecturer in ESPOCH Chimborazo university. During these years of experience at the previously mentioned jobs, I have acquired a wide experience in mechanical design criteria, and excellent skills using specific software such as Autocad, Inventor, Nastran, Solidworks, Flow Simulation, SAP 2000, and Matlab.

I work as a freelance Mechanical Design Engineer specializing in the design and development of mechanical systems, machines, and industrial mechanisms using professional CAD tools. My work focuses on... Read more

I work as a freelance Mechanical Design Engineer specializing in the design and development of mechanical systems, machines, and industrial mechanisms using professional CAD tools. My work focuses on creating functional mechanical assemblies, machine components, and complete mechanical systems that are optimized for real-world manufacturing. I develop designs that integrate engineering principles with practical fabrication methods, ensuring that the final models can be efficiently manufactured and assembled. I have experience designing a wide range of mechanical solutions including transmission systems, gear mechanisms, structural components, mechanical linkages, energy systems, and custom machines. My workflow includes the development of 3D models, full assemblies, engineering drawings, and visualization renders used for design validation and project presentation. In my design process I consider manufacturing constraints and production techniques such as CNC machining, turning, milling, welding, oxy-fuel cutting, and composite fabrication. This allows me to produce designs that are not only technically sound but also realistic to manufacture. My goal is to deliver high-quality mechanical designs that combine functionality, efficiency, and manufacturability for engineering projects, product development, and industrial applications.

I make drawings of elements design of parts and everything that is electrical and mechanical I can design

I make drawings of elements design of parts and everything that is electrical and mechanical I can design

Mechanical Engineer with expertise in 3D design (SolidWorks, Inventor), engineering calculations, and advanced simulation (ANSYS). I offer end-to-end design services, from concept and modeling to FEA/... Read more

Mechanical Engineer with expertise in 3D design (SolidWorks, Inventor), engineering calculations, and advanced simulation (ANSYS). I offer end-to-end design services, from concept and modeling to FEA/CFD analysis and technical documentation. My expertise in science of materials, metallurgy and laboratory analysis, helps to support any task trusted by clients. My experience in maintenance planning and process optimization ensures practical, cost-effective, and high-quality solutions for every project.

Hi! I’m a CAD designer and 3D modeler with experience in product development and innovative technical solutions. My expertise lies in transforming ideas into functional 3D models ready for manufacturi... Read more

Hi! I’m a CAD designer and 3D modeler with experience in product development and innovative technical solutions. My expertise lies in transforming ideas into functional 3D models ready for manufacturing, ensuring precision and efficiency in every detail. What can I do for you? ✅ 3D modeling in SOLIDWORKS, Fusion 360, and AutoCAD ✅ Design and optimization of mechanical parts and assemblies ✅ Technical drawings and manufacturing documentation ✅ Realistic rendering and product visualization ✅ Simulation and analysis to enhance design performance In addition, I have knowledge in PLC and LabVIEW programming, project management with Agile and Lean methodologies, and experience in inventory control, plumbing, and electrical systems. I work with precision, meet deadlines, and ensure that every design meets the client’s requirements. If you’re looking for a professional who can turn your vision into a production-ready 3D designer

Hello everyone, I'm passionate about 3D CAD technology and visualization. I have over 20 years of experience working with companies in the USA and other countries. My skills include: 3D modeling, rend... Read more

Hello everyone, I'm passionate about 3D CAD technology and visualization. I have over 20 years of experience working with companies in the USA and other countries. My skills include: 3D modeling, rendering, 3D animation, 3D models integrated into drone footage and CGI Ads. Experience in: AutoCad, Revit, Sketchup, 3DS Max, V-ray, Corona, Tyflow, Adobe Creative Suite. Please visit my YouTube channel: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a CAD Drafter specializing in AutoCAD and architectural drawings. I create precise floor plans, elevations, sections, and detailed construction drawings. I can convert hand sketches, PDFs, or ima... Read more

I am a CAD Drafter specializing in AutoCAD and architectural drawings. I create precise floor plans, elevations, sections, and detailed construction drawings. I can convert hand sketches, PDFs, or images into clean and organized CAD files. I focus on accuracy, clarity, and fast turnaround times. Reliable, detail-oriented, and committed to delivering high-quality drafting services.

Soy Emilio Lemos, Ingeniero en Mecatrónica, mi visión es lograr contribuir a la comunidad con mis conocimientos brindando seguridad y calidad en cada proyecto. Tengo experiencia en diseño CAD en softw... Read more

Soy Emilio Lemos, Ingeniero en Mecatrónica, mi visión es lograr contribuir a la comunidad con mis conocimientos brindando seguridad y calidad en cada proyecto. Tengo experiencia en diseño CAD en software como SolidWorks y Autodesk Inventor, al igual que en diseño y simulación de sistemas electrónicos como Multisim, KiCAD y Altium Designer.

ALEX CERÓN Passionate architect with experience at high-impact firms such as Uribe Schwarzkopf (intern) and Impakt Arquitectura (project lead). Skilled in architectural visualization, construction pla... Read more

ALEX CERÓN Passionate architect with experience at high-impact firms such as Uribe Schwarzkopf (intern) and Impakt Arquitectura (project lead). Skilled in architectural visualization, construction planning, commercial proposal development, and virtual tours. I excel at turning ideas into functional and comfortable spaces through strategic thinking and creative leadership. CORE SKILLS 2D/3D Design and Modeling Rendering and Virtual Tours Revit, AutoCAD, SketchUp, V-Ray, Adobe Suite Effective Communication & Team Leadership Construction Planning & Site Management EXPERIENCE Uribe Schwarzkopf – Intern: Site management, plan development, payroll control Impakt Arquitectura – Project Manager: Visualization, design, planning Carlos Espinel Real Estate – 3D modeling, rendering, virtual tours, proposals EDUCATION Bachelor’s in Architecture | Universidad Internacional SEK (Expected: January 2025) Real Estate Appraisal Course | July 2021 Occupational Risk Prevention Course | September 2024 PROJECTS & ACHIEVEMENTS Featured Thesis Project: Mixed-Use “Domestic Scenarios” – Quito, Ecuador Participant in the Quito Architecture Biennial (BAQ2024) – “Convergences” Category LANGUAGES Native Spanish

Hi! I'm Victor Valencia, a junior architect with experience in architectural drafting, 3D modeling, and project visualization.I specialize in developing architectural plans, BIM modeling with Revit, a... Read more

Hi! I'm Victor Valencia, a junior architect with experience in architectural drafting, 3D modeling, and project visualization.I specialize in developing architectural plans, BIM modeling with Revit, and 2D drafting using AutoCAD. I also create visual presentations using technical drawings and graphic tools.

Soy Keyla Rivera Castro, egresada de Arquitectura por la Universidad Central del Ecuador y dibujante freelance con experiencia en diseño urbano, arquitectónico y representación gráfica. Manejo program... Read more

Soy Keyla Rivera Castro, egresada de Arquitectura por la Universidad Central del Ecuador y dibujante freelance con experiencia en diseño urbano, arquitectónico y representación gráfica. Manejo programas como AutoCAD, Revit, SketchUp, Lumion y Photoshop, lo que me permite desarrollar proyectos con precisión técnica y creatividad. Me apasiona diseñar espacios que integren sostenibilidad, cultura y comunidad, aportando soluciones funcionales y estéticas. Además, mi experiencia en las artes y el deporte me ha brindado disciplina, liderazgo y trabajo en equipo, cualidades que aplico en cada proyecto que emprendo. Estoy entusiasmada por colaborar en iniciativas innovadoras, donde pueda aportar mi conocimiento y crecer profesionalmente. Te invito a conocer mi portafolio y contactarme para trabajar juntos en futuros proyectos.

I’m an architect with over 3 years of experience in design, technical drafting, and 3D visualization. I studied at Universidad de Las Américas and worked at Gabriel Rivera Arquitectos, an small archit... Read more

I’m an architect with over 3 years of experience in design, technical drafting, and 3D visualization. I studied at Universidad de Las Américas and worked at Gabriel Rivera Arquitectos, an small architecture office, where I contributed to award-winning projects recognized nationally. I specialize in architectural design, 3D modeling, technical drawings, and high-quality renders. My style blends modern design with rustic, natural elements—focused on material contrast, texture, and color. Tools: AutoCAD, SketchUp, Rhino, Enscape, V-Ray, Adobe Creative Suite.

I am an Interior Designer specialized in 3D visualization, technical drafting, and detailed documentation. I prepare clear and organized SketchUp models, AutoCAD plans, and photorealistic interior vis... Read more

I am an Interior Designer specialized in 3D visualization, technical drafting, and detailed documentation. I prepare clear and organized SketchUp models, AutoCAD plans, and photorealistic interior visualizations to support architectural design, client presentations, and construction documentation. I work with attention to detail and deliver professional files that are easy to interpret and modify. I am experienced in transforming sketches, PDF drawings, and measurements into accurate CAD files and 3D models. I am reliable, responsive, and committed to delivering high-quality work on time. I am available for remote freelance projects and long-term collaborations.

I am an architect from Ecuador working in 3d modeling and rendering for over 10 years. Archicad and twinmotion are my main tools.

I am an architect from Ecuador working in 3d modeling and rendering for over 10 years. Archicad and twinmotion are my main tools.

Acerca de mí Soy un apasionado de la Ingeniería Automotriz con un enfoque especializado en el diseño, modelado y validación de sistemas mecánicos. Mi objetivo es transformar conceptos complejos en sol... Read more

Acerca de mí Soy un apasionado de la Ingeniería Automotriz con un enfoque especializado en el diseño, modelado y validación de sistemas mecánicos. Mi objetivo es transformar conceptos complejos en soluciones funcionales y optimizadas utilizando herramientas de vanguardia en CAD, CAM y Simulación FEA. Mis Fortalezas Liderazgo y Colaboración: Cuento con la capacidad de liderar equipos de trabajo, identificando y potenciando las habilidades individuales para alcanzar objetivos comunes de manera eficiente. Autonomía y Aprendizaje Continuo: Soy un profesional autodidacta que busca constantemente actualizar sus conocimientos en nuevas tecnologías y softwares del sector. Resolución bajo Presión: Mantengo un enfoque detallista y preciso incluso en entornos de alta exigencia, garantizando entregas de calidad técnica superior. Proyectos Destacados Optimización Aerodinámica: Realicé el estudio y rediseño de la estructura frontal de un vehículo de competencia para reducir la resistencia aerodinámica, mejorando significativamente su eficiencia y desempeño. Diseño y Ensamblaje de Maquinaria: Ejecuté el modelado completo y el ensamblaje de una excavadora, aplicando criterios de ingeniería inversa y análisis de resistencia para asegurar la viabilidad del diseño. Formación y Herramientas Actualmente curso la carrera de Ingeniería Automotriz, formación que complemento con certificaciones y talleres especializados en: Diseño y Modelado: SolidWorks e Inventor. Simulación y Análisis: ANSYS y SimSolid (FEA). Manufactura: Conocimientos aplicados en procesos CAM.

I am a professional eager to showcase my skills and knowledge in design. I seek to contribute ideas, collaborate in project development, and become an expert in the field.

I am a professional eager to showcase my skills and knowledge in design. I seek to contribute ideas, collaborate in project development, and become an expert in the field.

🛠️ Welcome to MARQUEZ Engineering. I am here to support your projects and help you make them a reality. I specialized in product design using SolidWorks and Fusion 360. I validate my designs by perf... Read more

🛠️ Welcome to MARQUEZ Engineering. I am here to support your projects and help you make them a reality. I specialized in product design using SolidWorks and Fusion 360. I validate my designs by performing structural analysis and fluid flow simulations. 💡 My engineering knowledge ensures that my designs are fully functional and manufacturable. Please, have a look at my qualifications and services. 🎓 Studies: BEng(Hons) Mechanical Engineering - The University of Manchester, UK. 💻 Software proficiency: (I have over 10 certificates in various software) ✔ CAD: SolidWorks | Autodesk Fusion 360 | AutoCAD ✔ FEA: SolidWorks | Autodesk Fusion 360 ✔ CFD: SolidWorks | StarCCM + The services I offer: ➕ Designing fields: Mechanical Parts, Large Assembly and Mechanisms Mass and volume optimization (Reduce cost) 3D printing / Molding Weldments Free form sculpting for complex parts ➕ General Services Excellent Rendering 3D/2D Drawings and Bill of Materials (BOM) Exploded views and animations Animation of Mechanisms Structural validation using Finite Element Analysis (FEA) Fluid flow validation using Computational Fluid Dynamics (CFD) ➕ Things I can do for you 3D Modelling from description or drawings you provide Assemble parts for simulation, animations or rendering Correct errors you may have in your model Provide engineering advice for your project Complete unfinished projects Convert your file to another format ⚡ See my portfolio here 👍 I studied in the UK for four years so my English skills are very good in case you also need a report or presentation of the project. ⌛ I deliver excelent work and always on time !

Mechanical Engineer /Proyectista Mecánico design expertise, oil & gas facilities, construction, steel structures details, 3D modelling. hydraulic gates (vertical and radial ones)

Mechanical Engineer /Proyectista Mecánico design expertise, oil & gas facilities, construction, steel structures details, 3D modelling. hydraulic gates (vertical and radial ones)

Inventions and Architecture in Robotics Mechanical Engineering Research and Development Expertise in CAD and Hardware Design Industrial Designer: Proficient in Autodesk Inventor and SolidWorks. Rapi... Read more

Inventions and Architecture in Robotics Mechanical Engineering Research and Development Expertise in CAD and Hardware Design Industrial Designer: Proficient in Autodesk Inventor and SolidWorks. Rapid Prototyping and Manufacturing: Skilled in CNC laser cutting (sheet metal), CNC milling, 3D printing, and thermoforming. Software Development for Robotics Python Developer: Focused on automation and robotics applications. Portfolio Highlight: Robots Crate—a collection showcasing 15 years of hardware prototyping experience. Specialized in telepresence robotics, industrial automation, and expository museography. Notable Achievements Delivered over 200 projects for major brands, including Nestlé, Bristol Myers, Schering Plough, and The Voice Franchise. Recognized by prestigious awards and organizations: National Union Press Award Citi Foundation (Citibank) Innovation Award Innovation Awards LATAM Featured in university press releases and media outlets across South America and the USA. Teaching, Certifications, and Intellectual Property Self-taught in .NET, Arduino, and Autodesk Meshmixer. Professor of Autodesk Inventor and CAD solutions, with over 12 years of experience in CNC handling and rapid prototyping. Certifications: Autodesk CAD Biomed (Inventor and Fusion 360). Intellectual property portfolio: 3 invention registrations 5 utility design patents 4 commercial trademarks Entrepreneurial and Innovation Credentials As a technology entrepreneur, I specialize in robotics architecture, automation, and CAD design. Recognized by Citi Foundation as Innovation Product of the Year. Holder of 4 patents pending for mechanical designs. Portfolio: www.robotscrate.com

 Highly motivated; innovative problem solver  Detail focused with solid organizational and follow-through abilities  Experienced leader adept at motivating teams to achieve goals  Work effectivel... Read more

 Highly motivated; innovative problem solver  Detail focused with solid organizational and follow-through abilities  Experienced leader adept at motivating teams to achieve goals  Work effectively as independent contributor and collaborative team member  Solid critical thinking and analytical skills  Bilingual: English and Spanish  Proficient in AutoCAD, Revit, Microsoft Office

I am a Senior Architect focused on luxury Building & Landscape Architecture with a proven track record of shaping iconic, high-end environments. I lead interdisciplinary teams to create cohesive exper... Read more

I am a Senior Architect focused on luxury Building & Landscape Architecture with a proven track record of shaping iconic, high-end environments. I lead interdisciplinary teams to create cohesive experiential spaces where architecture, landscape, and interiors converge. My practice emphasizes architectural clarity, selective materiality, and precision in detailing, combined with rigorous project management to meet ambitious budgets and timelines. I leverage advanced visualization, BIM coordination, and sustainable design strategies to communicate concepts clearly and deliver exceptional, market-leading results for discerning clients in residential, hospitality, and corporate contexts.

I am an architect specializing in CAD drafting, design development, and 3D modeling for residential and commercial projects. I help clients transform ideas, sketches, or existing drawings into clear,... Read more

I am an architect specializing in CAD drafting, design development, and 3D modeling for residential and commercial projects. I help clients transform ideas, sketches, or existing drawings into clear, accurate, and buildable architectural documents that are easy to review, price, and execute. My services include architectural drafting (plans, sections, and elevations), design development, construction-ready drawings, 3D modeling, and redrawing or cleaning existing plans. I focus on precision, consistency, and practical solutions that support real construction processes. I work with a structured and detail-oriented approach, ensuring clear communication, reliable timelines, and professional standards on every project. My goal is to make the design and documentation process straightforward and stress-free for my clients.