Remote
Work location
Mechanical CAD Engineer for Consumer Product ( Solid Workd/Fusion 360) Ended
About the job
We are seeking an experienced mechanical CAD engineer to create a production-quality parametric model for a small consumer bathroom product. The design uses a compound drainage surface, follows a measured sink opening, and interfaces with a three-piece faucet. A complete engineering handoff package is available, including dimensions, drawings, visual references, milestone specifications, and pre-CAD geometry. Candidates must demonstrate advanced surface modeling, consumer-product design, plastic-part or additive-manufacturing experience, and the ability to deliver native CAD, STEP, STL, 3MF, drawings, and renderings. Please respond with relevant portfolio examples, proposed CAD software, fixed or milestone-based pricing, schedule, revision policy, and confirmation that all native files and project rights will be transferred to the project owners.
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports.
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports.
We are seeking an experienced mechanical CAD engineer to create a production-quality parametric model for a small consumer bathroom product. The design uses a compound drainage surface, follows a measured sink opening, and interfaces with a three-piece faucet. A complete engineering handoff package is available, including dimensions, drawings, visual references, milestone specifications, and pre-CAD geometry. Candidates must demonstrate advanced surface modeling, consumer-product design, plastic-part or additive-manufacturing experience, and the ability to deliver native CAD, STEP, STL, 3MF, drawings, and renderings. Please respond with relevant portfolio examples, proposed CAD software, fixed or milestone-based pricing, schedule, revision policy, and confirmation that all native files and project rights will be transferred to the project owners.
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports.
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports.
We are seeking an experienced mechanical CAD engineer to create a production-quality parametric model for a small consumer bathroom product. The design uses a compound drainage surface, follows a measured sink opening, and interfaces with a three-piece faucet. A complete engineering handoff package is available, including dimensions, drawings, visual references, milestone specifications, and pre-C...
read more
We are seeking an experienced mechanical CAD engineer to create a production-quality parametric model for a small consumer bathroom product. The design uses a compound drainage surface, follows a measured sink opening, and interfaces with a three-piece faucet. A complete engineering handoff package is available, including dimensions, drawings, visual references, milestone specifications, and pre-CAD geometry. Candidates must demonstrate advanced surface modeling, consumer-product design, plastic-part or additive-manufacturing experience, and the ability to deliver native CAD, STEP, STL, 3MF, drawings, and renderings. Please respond with relevant portfolio examples, proposed CAD software, fixed or milestone-based pricing, schedule, revision policy, and confirmation that all native files and project rights will be transferred to the project owners.
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports. read less
Scope of Work
Build a fully constrained, fully parametric production-quality CAD model.
Create the sink-derived front contour from the supplied measured profile.
Develop the final continuous Water Management Surface with no water-trapping pockets.
Digitize the exact irregular center-faucet base contour from the supplied physical tracing.
Model the rear splash barrier, faucet interfaces, side wings, and front return lip.
Finalize wall thickness, fillets, draft, clearances, and prototype-manufacturing details.
Generate engineering drawings and manufacturing exports. read less
Things to know
Expert
Skill Level
$1,500
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
CAD 3D
CAD Assembly
Fusion 360
Mechanical Engineering
Parametric Modeling
Plastic Design
Product Design
STEP/STL
Solidworks
Surface Modeling
+7 more
Job categories
Product Engineering Services
Mechanical CAD Design
SolidWorks Design Services
Mechanical Design Services
Industrial Design Services
+2 more
About the client
Payment not ready
United States (08:11 pm)
Posted
Active
Job activity
57 Applicants
0 interviews in progress
Similar jobs
Premium Luxury Solar Carport Design
Remote - Posted
We are looking for a creative and experienced designer to develop a unique, modern, and luxurious solar carport with a minimalist architectural style.
The design should fea...
3D Architectural Visualization Services
Architectural Planning and Design
Industrial Design Services
3D Design Services
3D Architectural Rendering Services
View job
Mechanical Design Engineer Needed – Plastic Extrusion & Product Development (Confidential Project)
Remote - Posted
Project Type: Mechanical Engineering / CAD Design / Design for Manufacturing (DFM)
Location: Remote – U.S. preferred
Project Overview
We are a U.S.-based startup deve...
Industrial Design Services
Product Engineering Services
Mechanical Design Services
Machine Design
Design Engineering Services
View job
CAD Designer Needed for Small Metal Wearable Product – 3D Modeling & Prototyping
Remote - Posted
Project Overview
I am an independent inventor seeking an experienced CAD designer or mechanical design engineer to assist with developing a small, wearable metal product....
3D Product Modeling
Mechanical Design Services
Wearables Design
View job
CAD design project — custom off-road ATV/camping trailer
Remote - Posted
I’m looking for a mechanical designer in Thailand to help me develop a custom off-road camping trailer and produce the CAD models and fabrication drawings needed to build it....
3D Modeling
Product Engineering Services
3D Design Services
View job
Mechanical engineering designer
Visakhapatnam, India - Posted
Desiging support for Product development with familiar with solidworks / creo to create 3d models and generate required views.
Mechanical Design Services
Machine Design
Engineering Design
View job
Mechanical Engineer (Design Review) and Prototype Assembler/Tester (Independent Contractors US Based Only)
United States - Posted
PumpNest is an early-stage company in Goodyear, Arizona, building a small countertop household appliance. We are looking for two people to help us build and test a first worki...
Mechanical Engineering
Prototype Design Services
Product Engineering Services
Design Engineering Services
Prototype Design Engineering
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
220,226
global members
33,595
projects delivered to clients
Trusted by
