Remote
Work location
CAD design project — custom off-road ATV/camping trailer Anyone
About the job
I’m looking for a mechanical designer in Thailand to help me develop a custom off-road camping trailer and produce the CAD models and fabrication drawings needed to build it.
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open t... read more
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open t... read more
I’m looking for a mechanical designer in Thailand to help me develop a custom off-road camping trailer and produce the CAD models and fabrication drawings needed to build it.
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open to discussing your preferred CAD platform.
Would this project fit your experience and interests? If so, please share examples of relevant work—particularly trailers, vehicle components, welded steel structures, or equipment that has actually been fabricated—and let me know:
• Which portions of the design and engineering you can handle.
• Your availability and typical pricing.
• Whether we could begin with a small paid concept/layout phase.
• Whether I would receive the native editable files and ownership rights to modify and manufacture the design.
I’m currently in Thailand and would be interested in meeting if practical, although working remotely is fine.
Thank you,
Chay read less
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open to discussing your preferred CAD platform.
Would this project fit your experience and interests? If so, please share examples of relevant work—particularly trailers, vehicle components, welded steel structures, or equipment that has actually been fabricated—and let me know:
• Which portions of the design and engineering you can handle.
• Your availability and typical pricing.
• Whether we could begin with a small paid concept/layout phase.
• Whether I would receive the native editable files and ownership rights to modify and manufacture the design.
I’m currently in Thailand and would be interested in meeting if practical, although working remotely is fine.
Thank you,
Chay read less
I’m looking for a mechanical designer in Thailand to help me develop a custom off-road camping trailer and produce the CAD models and fabrication drawings needed to build it.
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• W... read more
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• W... read more
I’m looking for a mechanical designer in Thailand to help me develop a custom off-road camping trailer and produce the CAD models and fabrication drawings needed to build it.
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open to discussing your preferred CAD platform.
Would this project fit your experience and interests? If so, please share examples of relevant work—particularly trailers, vehicle components, welded steel structures, or equipment that has actually been fabricated—and let me know:
• Which portions of the design and engineering you can handle.
• Your availability and typical pricing.
• Whether we could begin with a small paid concept/layout phase.
• Whether I would receive the native editable files and ownership rights to modify and manufacture the design.
I’m currently in Thailand and would be interested in meeting if practical, although working remotely is fine.
Thank you,
Chay read less
The concept is a trailer that can carry one ATV/four-wheeler while also incorporating:
• A rooftop tent and supporting structure.
• Suspension suitable for off-road use.
• Storage for camping equipment and amenities.
• Water storage.
• Battery/electrical equipment and optional generator storage.
• Loading ramps and suitable tie-down points.
I’m a semi-retired engineering and technology executive with hands-on welding and metal-fabrication experience. I intend to build the trailer myself in the United States, so I’m looking for practical mechanical-design help—not just a rendering or someone to trace a finished concept. I would provide the ATV dimensions, equipment requirements, initial sketches, and fabrication preferences, and work with you on the design.
Ideally, the completed package would include:
• Editable 3D models and assembly files.
• Dimensioned fabrication and assembly drawings.
• Material specifications, cut lists, and a bill of materials.
• DXF files for any laser- or plasma-cut parts.
• Chassis, drawbar, suspension-mounting, and rooftop-tent support details.
• Weight-distribution assessment and appropriate structural calculations, either by you or an identified engineering partner.
Autodesk Fusion would be my preference so I can work with the design afterward, but I’m open to discussing your preferred CAD platform.
Would this project fit your experience and interests? If so, please share examples of relevant work—particularly trailers, vehicle components, welded steel structures, or equipment that has actually been fabricated—and let me know:
• Which portions of the design and engineering you can handle.
• Your availability and typical pricing.
• Whether we could begin with a small paid concept/layout phase.
• Whether I would receive the native editable files and ownership rights to modify and manufacture the design.
I’m currently in Thailand and would be interested in meeting if practical, although working remotely is fine.
Thank you,
Chay read less
Things to know
Entry
Skill Level
$500
Fixed-rate (USD)
Part-time
Job type
1-3 months
Job duration
Areas of expertise
2D & 3D Mechanical Design
2D & 3D Modeling
2D Engineering Drawings
3D CAD Design
Structural Design
+2 more
Job categories
3D Modeling
Product Engineering Services
3D Design Services
About the client
Payment not ready
Thailand (06:05 am)
Posted
Active
Job activity
29 Applicants
0 interviews in progress
Similar jobs
Mechanical Engineer (Design Review) and Prototype Assembler/Tester (Independent Contractors US Based Only)
United States - Posted
PumpNest is an early-stage company in Goodyear, Arizona, building a small countertop household appliance. We are looking for two people to help us build and test a first worki...
Mechanical Engineering
Prototype Design Services
Product Engineering Services
Design Engineering Services
Prototype Design Engineering
View job
Mechanical Designer - Robot-Mounted Snack Dispenser | Fusion 360
Remote - Posted
We're Addition Robotics, building Plus, a bimanual mobile robot that works alongside care teams in senior living communities. We're looking for a mechanical designer to develo...
Mechanical Design Services
3D Design Services
3D Modeling
View job
CAD designer needed for ring design
Remote - Posted
I'm running a jewellery manufacturing unit.
I want to keep my delivery timeline in the best possible healthy state for that i want shift my work load to outside cad service p...
2D CAD Design Services
3D Design Services
3D Modeling
View job
Dual Shaft Shredder
China - Posted
Want a complete design of dual shaft Shredder for scrap metal. Max Thickness -3mm
Capacity 4-5 ton per hour
Machine Design
Mechanical Design Services
3D Design Services
View job
3d edits and design print ready
Remote - Posted
working on lures for fishing, need adjustements and edits
3D Printing Design
3D Design Services
3D Modeling
View job
Senior Mechanical Product Design Engineer – Injection-Moulded Tackle Storage System
Remote - Posted
Project Overview
VANTEXA is developing a premium range of fishing tackle storage products for the UK and European markets. We are seeking an experienced mechanical product...
Injection Molding Design
Product Engineering Services
Mechanical Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
219,448
global members
33,605
projects delivered to clients
Trusted by
