Mumbai, India
Work location
Industrial Designer — Medical Device Enclosure (10.1" Touchscreen Monitor, Injection Moulded) Ended
About the job
We are a medical device company in Mumbai, India. We need an industrial designer to design the enclosure for our clinical vital signs monitor, from concept through manufacturing-ready CAD. This is a one-time, fixed-scope project, not an ongoing role.
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinica... read more
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinica... read more
We are a medical device company in Mumbai, India. We need an industrial designer to design the enclosure for our clinical vital signs monitor, from concept through manufacturing-ready CAD. This is a one-time, fixed-scope project, not an ongoing role.
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinical scene
GA drawings with dimensions and tolerances (PDF + DWG)
DFM pack
Assembly and service access notes
STL files for an appearance prototype
Timeline: 6–8 weeks across 5 milestones. Remote, with weekly review calls.
Who we're looking for
Portfolio with at least one medical, diagnostic or lab device taken to manufacture. Strong surfacing CAD (SolidWorks, Creo, Rhino or Fusion 360). Practical injection moulding DFM knowledge.
Terms: Fixed fee, paid across milestones (25/25/25/25). Full IP assignment on final payment. Mutual NDA before detailed specs and component data are shared. Two revision rounds included per milestone.
To apply: Send your portfolio with medical or regulated hardware clearly marked, a short paragraph on how you'd approach the screwless wipe-down-safe front face, your fixed-fee quote, and availability. read less
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinical scene
GA drawings with dimensions and tolerances (PDF + DWG)
DFM pack
Assembly and service access notes
STL files for an appearance prototype
Timeline: 6–8 weeks across 5 milestones. Remote, with weekly review calls.
Who we're looking for
Portfolio with at least one medical, diagnostic or lab device taken to manufacture. Strong surfacing CAD (SolidWorks, Creo, Rhino or Fusion 360). Practical injection moulding DFM knowledge.
Terms: Fixed fee, paid across milestones (25/25/25/25). Full IP assignment on final payment. Mutual NDA before detailed specs and component data are shared. Two revision rounds included per milestone.
To apply: Send your portfolio with medical or regulated hardware clearly marked, a short paragraph on how you'd approach the screwless wipe-down-safe front face, your fixed-fee quote, and availability. read less
We are a medical device company in Mumbai, India. We need an industrial designer to design the enclosure for our clinical vital signs monitor, from concept through manufacturing-ready CAD. This is a one-time, fixed-scope project, not an ongoing role.
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal pr... read more
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal pr... read more
We are a medical device company in Mumbai, India. We need an industrial designer to design the enclosure for our clinical vital signs monitor, from concept through manufacturing-ready CAD. This is a one-time, fixed-scope project, not an ongoing role.
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinical scene
GA drawings with dimensions and tolerances (PDF + DWG)
DFM pack
Assembly and service access notes
STL files for an appearance prototype
Timeline: 6–8 weeks across 5 milestones. Remote, with weekly review calls.
Who we're looking for
Portfolio with at least one medical, diagnostic or lab device taken to manufacture. Strong surfacing CAD (SolidWorks, Creo, Rhino or Fusion 360). Practical injection moulding DFM knowledge.
Terms: Fixed fee, paid across milestones (25/25/25/25). Full IP assignment on final payment. Mutual NDA before detailed specs and component data are shared. Two revision rounds included per milestone.
To apply: Send your portfolio with medical or regulated hardware clearly marked, a short paragraph on how you'd approach the screwless wipe-down-safe front face, your fixed-fee quote, and availability. read less
What we're building
A compact desktop patient monitor for hospitals and outpatient clinics. It has a 10.1-inch touchscreen, a built-in thermal printer, and a fingerprint sensor. The look should be modern, premium and approachable — closer to Apple or Philips healthcare hardware than to traditional clinical equipment.
Scope of work
Smooth white injection-moulded ABS/PC shell with anti-microbial matte finish, light grey front bezel
Screwless front face with no exposed fasteners and no front vents, so it can be chemically wiped down; venting concealed at bottom or rear
Tablet-like glass front with thin uniform borders, fixed ergonomic tilt for desktop use
Top-mounted thermal printer with top paper exit and tool-free roll change
Recessed fingerprint sensor, recessed patient cable ports with strain relief, rear panel for power/Ethernet/USB
Design for injection moulding at low pilot volume — draft angles, wall thickness, ribs, parting lines all resolved
Must not obstruct later IEC 60601-1 and 60601-1-2 compliance work
Deliverables
Concept sketches — 3 distinct directions
Refined concept with CMF specification
Full 3D CAD of the enclosure (native + STEP)
Photorealistic renders — 6 views plus 1 in-context clinical scene
GA drawings with dimensions and tolerances (PDF + DWG)
DFM pack
Assembly and service access notes
STL files for an appearance prototype
Timeline: 6–8 weeks across 5 milestones. Remote, with weekly review calls.
Who we're looking for
Portfolio with at least one medical, diagnostic or lab device taken to manufacture. Strong surfacing CAD (SolidWorks, Creo, Rhino or Fusion 360). Practical injection moulding DFM knowledge.
Terms: Fixed fee, paid across milestones (25/25/25/25). Full IP assignment on final payment. Mutual NDA before detailed specs and component data are shared. Two revision rounds included per milestone.
To apply: Send your portfolio with medical or regulated hardware clearly marked, a short paragraph on how you'd approach the screwless wipe-down-safe front face, your fixed-fee quote, and availability. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Industrial Design
3D Modeling
3D Modeling & Product Design
3D Product Design
Concept Design
+2 more
Job categories
Industrial Design Services
Medical Devices Design
Electronic Enclosures Design
Injection Molding Design
+1 more
About the client
Payment ready
India (11:58 am)
Posted
Active
Job activity
26 Applicants
2 interviews in progress
Similar jobs
Freelance CAD Designer Needed – Waterproof Product Enclosure Design (3D Printing / DFM)
Patiala, India - Posted
looking for a skilled CAD / Industrial Product Designer to design a small, waterproof (IP67) plastic housing for a two-wheeler IoT device.
Scope of Work:
Design a compact...
3D Printing Design
Product Engineering Services
3D Design Services
Electronic Enclosures Design
Design for Manufacturability (DFM Services)
View job
Mechanical Product Engineer for Retractable Golf Brush With Interchangeable Heads
United States - Posted
I am developing a compact golf-club cleaning brush called Caddy Clip. It will attach to a golf bag or belt loop and include a retractable cord, an attachment clip, and interch...
Product Engineering Services
Mechanical CAD Design
Industrial Design Services
Prototype Design Services
Mechanical Design Services
View job
Senior Industrial Product Designer / SolidWorks Expert – Compact Electronic Sensor
Remote - Posted
We are looking for an experienced freelance industrial product designer to review and improve an existing SolidWorks design of a compact wireless electronic sensor. The work i...
Industrial Design Services
Product Engineering Services
SolidWorks Design Services
Mechanical Design Services
Electronic Enclosures Design
View job
Electronics case design | 4G Router | ATA
United States - Posted
We are looking for a problem solving, engaged individual who can help SilverComm design a next generation of our POTS replacement device using a 4G router and an ATA (analog t...
Electronic Enclosures Design
Electronics Design Service
Product Engineering Services
View job
# Modifying the MJVision camera enclosure for the Jetson Orin NX and two FRAMOS IMX678 cameras
Remote - Posted
## Project overview
An enclosure has already been fully designed for the MJVision panoramic football camera using the Radxa ROCK 5B+ board. The existing project includes th...
Product Engineering Services
Industrial Design Services
3D Product Modeling
Electronic Enclosures Design
Mechanical Design Services
View job
Solidworks drawings for electrical equipment and
Remote - Posted
Looking for someone who has experience in solid works and engineering drawings for product design
SolidWorks Design Services
Industrial Design Services
Manufacturing Drawings
Electrical Engineering
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
218,657
global members
33,607
projects delivered to clients
Trusted by
