CAD Technical Drawings for Health Permit Application Ended

About the job

Hi,

This is a one time project. I would like this done as soon as possible and was hoping to get a quote for the work needed.

I am looking for an experienced CAD drafter to produce technical drawings for a mobile food cart permit application being submitted to Vancouver Coastal Health (VCH) in Vancouver, BC.

The unit is a Daihatsu Hijet Kei truck with a custom-built kitchen in the truck bed. All drawings must comply with VCH and BCCDC Mobile Food Premises Guidelines (July 2024) standards.

I require the following three drawings in CAD format:

1. TOP-DOWN FLOOR PLAN — scaled, fully dimensioned, all equipment labeled with item numbers, model numbers, and dimensions. Must include title block, legend, compliance notes, and scale indicator.

2. SIDE ELEVATION — DRIVER SIDE — exterior side view showing truck in travel/closed position and service/open position (canopy raised). Equipment positions visible, all key dimensions labeled.

3. SIDE ELEVATION — PASSENGER SIDE — same requirements as driver side.

I will provide the following reference materials upon engagement:
- Detailed hand-drawn layout sketch (PDF)
- Excel floor plan with all equipment positioned, dimensioned, and labeled with model numbers and specifications
- Complete numbered equipment list with all model numbers, dimensions, and certifications
- Three completed schematics (plumbing, LP gas, electrical) for reference
- VCH plumbing schematic example showing the expected drawing style
- BCCDC... read more
Hi,

This is a one time project. I would like this done as soon as possible and was hoping to get a quote for the work needed.

I am looking for an experienced CAD drafter to produce technical drawings for a mobile food cart permit application being submitted to Vancouver Coastal Health (VCH) in Vancouver, BC.

The unit is a Daihatsu Hijet Kei truck with a custom-built kitchen in the truck bed. All drawings must comply with VCH and BCCDC Mobile Food Premises Guidelines (July 2024) standards.

I require the following three drawings in CAD format:

1. TOP-DOWN FLOOR PLAN — scaled, fully dimensioned, all equipment labeled with item numbers, model numbers, and dimensions. Must include title block, legend, compliance notes, and scale indicator.

2. SIDE ELEVATION — DRIVER SIDE — exterior side view showing truck in travel/closed position and service/open position (canopy raised). Equipment positions visible, all key dimensions labeled.

3. SIDE ELEVATION — PASSENGER SIDE — same requirements as driver side.

I will provide the following reference materials upon engagement:
- Detailed hand-drawn layout sketch (PDF)
- Excel floor plan with all equipment positioned, dimensioned, and labeled with model numbers and specifications
- Complete numbered equipment list with all model numbers, dimensions, and certifications
- Three completed schematics (plumbing, LP gas, electrical) for reference
- VCH plumbing schematic example showing the expected drawing style
- BCCDC Mobile Food Premises Guidelines July 2024 (PDF)

Could you please provide:
- Your estimated cost for the three drawings
- Your estimated turnaround time
- Whether VCH-requested revisions after submission are included in your quote
- Confirmation that final files will be delivered in both PDF (print-ready) and editable CAD format (DWG or DXF)

I have all reference materials ready to share immediately upon your response.

Thank you for your time and I look forward to hearing from you.

Jostin del Rosario read less
Hi,

This is a one time project. I would like this done as soon as possible and was hoping to get a quote for the work needed.

I am looking for an experienced CAD drafter to produce technical drawings for a mobile food cart permit application being submitted to Vancouver Coastal Health (VCH) in Vancouver, BC.

The unit is a Daihatsu Hijet Kei truck with a custom-built kitchen in the truck b... read more
Hi,

This is a one time project. I would like this done as soon as possible and was hoping to get a quote for the work needed.

I am looking for an experienced CAD drafter to produce technical drawings for a mobile food cart permit application being submitted to Vancouver Coastal Health (VCH) in Vancouver, BC.

The unit is a Daihatsu Hijet Kei truck with a custom-built kitchen in the truck bed. All drawings must comply with VCH and BCCDC Mobile Food Premises Guidelines (July 2024) standards.

I require the following three drawings in CAD format:

1. TOP-DOWN FLOOR PLAN — scaled, fully dimensioned, all equipment labeled with item numbers, model numbers, and dimensions. Must include title block, legend, compliance notes, and scale indicator.

2. SIDE ELEVATION — DRIVER SIDE — exterior side view showing truck in travel/closed position and service/open position (canopy raised). Equipment positions visible, all key dimensions labeled.

3. SIDE ELEVATION — PASSENGER SIDE — same requirements as driver side.

I will provide the following reference materials upon engagement:
- Detailed hand-drawn layout sketch (PDF)
- Excel floor plan with all equipment positioned, dimensioned, and labeled with model numbers and specifications
- Complete numbered equipment list with all model numbers, dimensions, and certifications
- Three completed schematics (plumbing, LP gas, electrical) for reference
- VCH plumbing schematic example showing the expected drawing style
- BCCDC Mobile Food Premises Guidelines July 2024 (PDF)

Could you please provide:
- Your estimated cost for the three drawings
- Your estimated turnaround time
- Whether VCH-requested revisions after submission are included in your quote
- Confirmation that final files will be delivered in both PDF (print-ready) and editable CAD format (DWG or DXF)

I have all reference materials ready to share immediately upon your response.

Thank you for your time and I look forward to hearing from you.

Jostin del Rosario read less
del Rosario's Hospitality Floor Plan Final.pdf pdf May 15, 2026
Electrical System Schematic.pdf pdf May 15, 2026
LP Propane Gas System Schematic.pdf pdf May 15, 2026
Plumbing Schematic Example.pdf pdf May 15, 2026
del Rosario's Hospitality Plumbing Schematic.pdf pdf May 15, 2026
Mobile Food Premises Guidelines.pdf pdf May 15, 2026

Things to know

Job location

Remote

Work location

Job skill level

Entry

Skill Level

Job rate

Open budget

Hourly

Job type

Part-time

Job type

Job length

Under 1-month

Job duration

Areas of expertise

3D Design CAD Design DESIG Design 3D design +2 more

Job categories

CAD Drafting Services Construction Drawings Commercial Drafting

About the client

Payment ready

Canada (10:23 pm)

Posted

Active

Job activity

27 Applicants

4 interviews in progress

4 unanswered invites

Similar jobs

Hiring: Architectural CAD Drafter – Florida Window & Door Permit Plans

Remote - Posted
We are seeking an experienced architectural CAD drafter to prepare window and door plans for a single-family residential renovation project in South Florida. Scope of Work:...
AutoCAD Drafting & Design CAD Drafting Services Architectural Drafting Services
View job

Capstone Building Project

Remote - Posted
60 storey building needs adjustment of cad, DXF files, etc. More information can be provided upon communication. Probably will need handwritten calculations as well. Willing t...
Structural Engineering 2D CAD Design Services Civil Engineering Engineering Design Construction Drawings
View job

freelancer drafter for Singapore Company

Remote - Posted
Produce detailed 2D shop drawings, construction details. Drafting: layout, renovation, as-built and working drawings in AutoCAD, set up to your own CAD standard (layers, li...
CAD Drafting Services Design & Drafting Architectural Drafting Services
View job

Paid Licensing of Existing CAD Models & Drawings + Minor Modifications

Remote - Posted
My company is looking to work with several freelance mechanical designers to license existing CAD models and manufacturing drawings for product demonstrations. Our product...
Design & Drafting CAD Drawing Services Mechanical Design Services CAD Drafting Services
View job

Independent Structural Calculation (Eurocodes) — single-storey steel retail park, North Macedonia

Remote - Posted
ABOUT THE JOB ATOM STEEL LTD (steel fabrication and erection, North Macedonia, EN 1090-2 EXC3 / EN ISO 3834-2) is looking for an experienced, registered structural engineer t...
Structural Design Services Structural Engineering Steel Detailing Services Steel Shop Drawing Services Commercial Drafting
View job

Architect / BIM Designer Needed – Modern House in Kenya | Full Construction Drawings, 3D, BOQ & Engineering

Remote - Posted
Project Type: Existing residential design revision and full construction documentation Location: Kisii, Kenya Contract: Fixed total price, milestone-based Target Start Date...
Architectural BIM Services 3D Architectural Modeling 3D Architectural Rendering Services Architectural Planning and Design Construction Drawings
View job

How it works

Find hourly jobs

Find hourly jobs

Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs

Fixed-rate jobs

Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests

Design contests

Experts build a reputation and earn prizes by participating in design challenges.

About Cad Crowd

4.9/5.0

(Our client satisfaction)

G2 2022

Spring high performer

223,486

global members

33,595

projects delivered to clients


Trusted by
US Army Corps of Engineers
Tiffany
BCG
Target
KPMG
Xprize

Find freelance & remote jobs

Your next big opportunity is just a click away. Create a free profile and start finding work tailored to your skills.