Saudi Arabia
Work location
perform the Front-End Engineering Design (FEED) ETAP studies for the new 115/33-13.8kV Primary Substation Ended
About the job
The objective of this study is to perform comprehensive ETAP simulations and analyses to support the Front-End Engineering Design (FEED) of a new 115/33–13.8kV Primary Substation to be connected to the existing 380/115kV BSP.
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule
The objective of this study is to perform comprehensive ETAP simulations and analyses to support the Front-End Engineering Design (FEED) of a new 115/33–13.8kV Primary Substation to be connected to the existing 380/115kV BSP.
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule
The objective of this study is to perform comprehensive ETAP simulations and analyses to support the Front-End Engineering Design (FEED) of a new 115/33–13.8kV Primary Substation to be connected to the existing 380/115kV BSP.
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and... read more
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and... read more
The objective of this study is to perform comprehensive ETAP simulations and analyses to support the Front-End Engineering Design (FEED) of a new 115/33–13.8kV Primary Substation to be connected to the existing 380/115kV BSP.
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule read less
The ETAP studies aim to validate the electrical network design by assessing load flow, short-circuit levels, protection coordination, and system stability under normal and contingency conditions. The study will ensure reliable integration of the new substation with the existing BSP, verify equipment ratings and system performance, and confirm compliance with SEC standards and project requirements.
In addition, a site visit to the existing BSP will be conducted to verify available spare capacity, assess existing system conditions, and confirm the accuracy of input data used in the ETAP model, ensuring realistic and reliable study results.
SAEP-148, Mandatory Engineering Standards and Codes, is used for the design of the facilities. Saudi Electricity Regulation Authority and Saudi Electricity Engineering Standards are used for the design of the new electrical network.
DELIVERABLES 9.1. RFQ Stage
• Technical proposal for review by SLFE • Commercial proposal of Power System Studies
• Commercial proposal of Power System Stability Study
• Commercial proposal of Switching Transient Analysis, TRV evaluation and Insulation Coordination Studies
• Project Schedule read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Full-time
Job type
1-3 months
Job duration
Areas of expertise
3D Design
ETABS
ETABS 2025
Front-End Engineering Design (FEED)
Protection Coordination
+2 more
Job categories
Electrical Engineering
Electrical Drafting
Civil Drafting Services
Languages
English
Full professional proficiency
Arabic
Full professional proficiency
About the client
Payment not ready
Saudi Arabia (03:43 pm)
Posted
Active
Job activity
8 Applicants
0 interviews in progress
Similar jobs
US Only: Mechanical Product Design Engineer (Freelance) — Proprietary Handheld Electromechanical Accessory
United States - Posted
Seeking an experienced US-based mechanical design engineer to take a confidential, proprietary handheld electromechanical accessory and its base charging cradle from detailed...
Mechanical Engineering
Electrical Engineering
Electronics Design Service
Product Engineering Services
Electronic Prototyping and Design Services
View job
Sr RF Engineer
Remote - Posted
Participate in the RF payload design team developing a revolutionary satellite communications system.
AscendArc is a startup founded to revolutionize the satellite communica...
Radio Frequency Engineering and Design Services
Electrical Engineering
Engineering Design
View job
need modifications, electric and plumping drawings
Remote - Posted
need modifications, electric and plumping drawings for my house we have done drawing but since architect is not feeling well we are looking for new one to support and fix the...
Electrical Drafting
MEP Drafting Services
Mechanical Drafting
Electrical Schematic Drawing Services
View job
Electrical Design & PLC Automation Engineer for Resort Fuel Farm (Pump Room, Fuel Tank & Control Panel)
Remote - Posted
We are looking for an experienced Electrical Design Engineer with industrial fuel system experience to prepare complete electrical and control drawings for a resort fuel farm...
Electrical Engineering
PLC Programming
Industrial Design Services
View job
CAD Designer or Draftsman for making drawings of an STP
Remote - Posted
We are seeking a skilled CAD Designer or Draftsman to create detailed technical drawings and diagrams for our project.
Responsibilities include making layout plans, hydrauli...
Civil Drafting Services
2D CAD Drafting Services
2D Drawings and Floor Plans
View job
Oil Farm As-Built documentation
South Africa - Posted
We are seeking a skilled freelancer or team to create precise As-Built drawings for a complex piping system located on an oil farm. The project requires converting existing po...
As-Built Drawings
Mechanical Drafting
Civil Drafting Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
203,641
global members
33,308
projects delivered to clients
Trusted by
