Remote
Work location
3d Mesh from Video Ended
About the job
Budget: $125
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline... read more
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline... read more
Budget: $125
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline of your process/workflow
• Actual time taken upon completion (for selected candidates)
Goal of This Project:
We are evaluating different approaches to working with real-world scan data and are interested in both the quality of the output and the efficiency of the process. We are looking for candidates for continued projects.
Notes:
• The scan quality reflects real-world conditions
• We are intentionally allowing flexibility in approach to gauge ability and thoughtfulness in the process
Please include examples of similar work when submitting your proposal. read less
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline of your process/workflow
• Actual time taken upon completion (for selected candidates)
Goal of This Project:
We are evaluating different approaches to working with real-world scan data and are interested in both the quality of the output and the efficiency of the process. We are looking for candidates for continued projects.
Notes:
• The scan quality reflects real-world conditions
• We are intentionally allowing flexibility in approach to gauge ability and thoughtfulness in the process
Please include examples of similar work when submitting your proposal. read less
Budget: $125
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A... read more
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A... read more
Budget: $125
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline of your process/workflow
• Actual time taken upon completion (for selected candidates)
Goal of This Project:
We are evaluating different approaches to working with real-world scan data and are interested in both the quality of the output and the efficiency of the process. We are looking for candidates for continued projects.
Notes:
• The scan quality reflects real-world conditions
• We are intentionally allowing flexibility in approach to gauge ability and thoughtfulness in the process
Please include examples of similar work when submitting your proposal. read less
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based scan into a usable 3D mesh (OBJ). The final output will be used for Fusion Modeling, so we require accuracy, consistency, and attention to our specific requirements.
Provided Materials:
• A short video of an example scan
• A reference image for scale
• Example files (The OBJ files) demonstrating the desired level of detail/resolution
Scope of Work:
From the provided materials, create two complete 3D models of the palm side half (50%) of the hand:
1. Impression model (negative) – like a hand pushed into sand
2. Relief model (positive) – like a raised topographical map
Mesh Output Requirements:
• Mesh format compatible with Fusion 360
• Clean, watertight geometry suitable for 3d printing or carving
• Level of detail consistent with provided examples
• Final model should be adjusted such that:
o The five fingertips are aligned with the highest point of the palm
o 4 fingers are spaced with a minimum gap of 1/8" and a max of ¾” between them
o Scale is accurate to within 0.1” (2.5mm)
IMPORTANT: The impression will need to have the smooth bevel from the top of the plaque. And the space between the fingers will need to have the downward slope.
Additional Requirements:
As part of your submission, please include:
• Estimated time to complete the project
• Software/tools used
• A brief outline of your process/workflow
• Actual time taken upon completion (for selected candidates)
Goal of This Project:
We are evaluating different approaches to working with real-world scan data and are interested in both the quality of the output and the efficiency of the process. We are looking for candidates for continued projects.
Notes:
• The scan quality reflects real-world conditions
• We are intentionally allowing flexibility in approach to gauge ability and thoughtfulness in the process
Please include examples of similar work when submitting your proposal. read less
Things to know
Any
Skill Level
$125
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Models
Design 3D
Lighting Analysis
Photogrammetry
Power Supply Design
+2 more
Job categories
Image to CAD Conversion Services
Photorealistic Rendering
3D Modeling
About the client
Payment ready
United States (09:52 am)
Posted
Active
Job activity
14 Applicants
3 interviews in progress
Similar jobs
3D refinement of two interior trim parts
Remote - Posted
TASK: Reverse engineering / 3D refinement of two interior trim parts
SOURCE: Raw 3D scans (.stl/.ply) of two parts:
1. A-Pillar Interior Finisher
2. T-Top Side Finisher...
3D Scan to CAD Service
3D Modeling
3D Product Modeling
Mechanical Design Services
View job
Honda S2000 AP1 front overfenders.
Remote - Posted
Honda S2000 AP1 front overfenders like the photos
Based on OEM fender STL.
+35mm width.
Large side vent similar to attached reference photos.
Copy from the photo d...
3D Modeling
Concept Design
Automotive Design
View job
Braids jewelry
Remote - Posted
I am looking for a 3d design and prototype for braids jewelry. I have one draw already but I am looking for the best clip system
3D Jewelry Rendering
3D Modeling
3D Design Services
View job
Mechanical Equipment Designer
Remote - Posted
Looking for Mechanical Equipment Designer to design equipment from concept to Detailing.
Concept as attached.
Machine Drawing Services
3D Modeling
3D Design Services
View job
Breathable
Remote - Posted
To help in fire situations in a house or an apartment for a certain time.
3D Modeling
3D Design Services
Engineering Design
View job
Simple 3d Model cretion
Remote - Posted
Models for key chains
This will involve taking logo images and creating printable files to work in bambu handy
3D Modeling
3D Design Services
Engineering Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
195,930
global members
32,854
projects delivered to clients
Trusted by
