Remote
Work location
CAD designer needed to model 3D consumer product Ended
About the job
Technical Brief: Snap-On Honeycomb Curtain Spacer
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5... read more
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5... read more
Technical Brief: Snap-On Honeycomb Curtain Spacer
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5mm to 2.5mm).
4. Deliverables:
* 3D CAD files in .STEP (for manufacturing) and .STL (for 3D printing) formats.
* A basic technical drawing showing all major dimensions. read less
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5mm to 2.5mm).
4. Deliverables:
* 3D CAD files in .STEP (for manufacturing) and .STL (for 3D printing) formats.
* A basic technical drawing showing all major dimensions. read less
Technical Brief: Snap-On Honeycomb Curtain Spacer
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standar... read more
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standar... read more
Technical Brief: Snap-On Honeycomb Curtain Spacer
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5mm to 2.5mm).
4. Deliverables:
* 3D CAD files in .STEP (for manufacturing) and .STL (for 3D printing) formats.
* A basic technical drawing showing all major dimensions. read less
Project Overview:
I am developing a premium curtain accessory designed to maintain uniform pleats/folds behind eyelet/grommet curtains. I need a 3D CAD model (STEP and STL formats) optimized for both 3D printing (Nylon PA12) and future injection molding (Polypropylene).
1. Critical Dimensions & Fit:
* Rod Compatibility: Designed for a standard 1-inch (25.4mm) and 1.5-inch (38mm) diameter rod. (Please provide two versions of the file).
* Snap-On Opening: The "C" opening should be approximately 75-80% of the rod diameter to allow for a secure "snap" fit without being too difficult to remove.
* Lengths needed: I require three fixed-length files: 5cm (Small), 8cm (Medium), and 12cm (Large).
2. Design Features:
* Aesthetic (Outer): A "skeletonized" honeycomb or hexagonal lattice structure. Walls should be thick enough for structural integrity but thin enough to look high-end.
* Surface Geometry: The outer edges must be rounded/filleted to ensure they do not snag or tear delicate curtain fabrics.
* Internal Grip: The inner surface (that touches the rod) should feature a low-profile textured pattern (similar to a pebble grain or small ribs) to provide friction and prevent sliding.
3. Material Requirements (for Designer's Consideration):
* The part must be able to flex open and "spring back" to its original shape.
* Wall thickness should be optimized for Polypropylene (PP) injection molding (typical range of 1.5mm to 2.5mm).
4. Deliverables:
* 3D CAD files in .STEP (for manufacturing) and .STL (for 3D printing) formats.
* A basic technical drawing showing all major dimensions. read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D Modeling
CAD Design
CNC Programming
+1 more
Job categories
Industrial Design Services
3D Product Rendering and Design
3D Modeling
About the client
Payment not ready
Tanzania (11:35 pm)
Posted
Active
Job activity
45 Applicants
0 interviews in progress
Similar jobs
Offset Smoker
Remote - Posted
Attached pictures are a mock up drawing of the design I made and some real work examples.
a few stipulations and constraints are;
1) the width of the cooking chamber and...
Product Engineering Services
3D Product Modeling
Mechanical Design Services
3D Modeling
View job
NX designer needed to model 3D auto component
Remote - Posted
We need a part-time designer to help with an ongoing 3D rendering for one of our clients. The work will involve taking drawings in Tiff format from our manufacturer in Poland...
Product Engineering Services
3D Modeling
3D Product Modeling
View job
Interior detailing in Rayon
Remote - Posted
I need to produce detailed drawings for a house with an approximate area of 200m². This includes interior detailing—such as decor, custom cabinetry, and specific design elem...
Interior Design
3D Design Services
3D Modeling
View job
The hedgehog doll couple
Remote - Posted
3 d printer professional that can make me a 3feet tall hairless hedgehog anthro couple with silicone skin and bendable with nipple and private parts but the boy’s ding dong is...
3D Printing Services
3D Design Services
3D Modeling
View job
The hairless otter civet toy project
Remote - Posted
It should be 3d printed and hairless with silicone soft skinned life sized and very bendable and it’s created by a male person not female and he should be from either Italy or...
3D Product Modeling
3D Design Services
3D Modeling
View job
(US Based Only) Remote thermal and vacuum systems engineer (freeze-drying / lyophilization) for a consumer countertop appliance
Remote - Posted
PumpNest is an early-stage company developing a countertop freeze dryer designed specifically for breast milk. We are looking for a remote thermal and vacuum systems engineer...
Mechanical Engineering
3D Design Services
3D Modeling
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
220,415
global members
33,595
projects delivered to clients
Trusted by
