India
Work location
Smart Assistive Glasses Enclosure Redesign — Consumer-Ready Curved Form Factor with DFM (Injection Molding Ready) Ended
About the job
We are HearSight, an assistive technology startup building smart glasses designed specifically for the blind and visually impaired community. HearSight HSV2 uses onboard cameras and sensors to capture the real world and converts that information into real-time audio cues, alerts, and feedback, allowing blind and visually impaired users to navigate daily life more independently and confidently.
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped.
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped.
We are HearSight, an assistive technology startup building smart glasses designed specifically for the blind and visually impaired community. HearSight HSV2 uses onboard cameras and sensors to capture the real world and converts that information into real-time audio cues, alerts, and feedback, allowing blind and visually impaired users to navigate daily life more independently and confidently.
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped.
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped.
We are HearSight, an assistive technology startup building smart glasses designed specifically for the blind and visually impaired community. HearSight HSV2 uses onboard cameras and sensors to capture the real world and converts that information into real-time audio cues, alerts, and feedback, allowing blind and visually impaired users to navigate daily life more independently and confidently.
Ou... read more
Ou... read more
We are HearSight, an assistive technology startup building smart glasses designed specifically for the blind and visually impaired community. HearSight HSV2 uses onboard cameras and sensors to capture the real world and converts that information into real-time audio cues, alerts, and feedback, allowing blind and visually impaired users to navigate daily life more independently and confidently.
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped. read less
Our PCB, component placement, camera positions, and all electronics are fully finalized. We are cannot change that.
What We Need:
We need an experienced industrial/mechanical designer to redesign only the outer enclosure/shell of our existing HSV2, transforming it from its current boxy, utilitarian form factor into a sleek, curved, wraparound consumer-grade profile.
The redesigned enclosure must look intentional, modern, and consumer-friendly, a product that a person would confidently wear in public every day, despite housing cameras, sensors, and a full PCB within the frame. The bulk is a given, the goal is to make it look designed, not prototyped. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Full-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D Conceptual Design
Industrial Design
Mechanical Design
Product Design
Solidwork
Wearable Product Design
+4 more
Job categories
3D Product Modeling
Design for Manufacturing and Assembly
Injection Molding Design
DFM Services
+1 more
Languages
English
Professional working proficiency
About the client
Payment not ready
India (06:43 pm)
Posted
Active
Job activity
17 Applicants
0 interviews in progress
Similar jobs
Looking CNC Machine Shops with Existing Production Files (Fusion 360 CAM)
Remote - Posted
We seeking CNC machine shops to license archived 3-axis milled parts created with Fusion 360 under a commercial license.
For each job we need (sample file attached)
1. 3D...
Manufacturing Drawings
Machine Design
CNC Programming
Design for Manufacturing and Assembly
Mechanical Engineering
View job
CAD revision of a 27 oz shaker bottle — thread fix, body taper, deeper scoop cap (STEP + STL)
Remote - Posted
CAD revision of a 27 oz shaker bottle — thread fix, body taper, deeper scoop cap
CORRECTION (Oct 24): The file previously attached to this job (assembly_b.step) was an in-h...
3D Product Modeling
Product Engineering Services
3D Design Services
View job
# Modifying the MJVision camera enclosure for the Jetson Orin NX and two FRAMOS IMX678 cameras
Remote - Posted
## Project overview
An enclosure has already been fully designed for the MJVision panoramic football camera using the Radxa ROCK 5B+ board. The existing project includes th...
Product Engineering Services
Industrial Design Services
3D Product Modeling
Electronic Enclosures Design
Mechanical Design Services
View job
3d CAD Manufacture ready watch design
Remote - Posted
3D CAD Watch Designer — Production-Ready STEP File for automatic watch
Hi there,
I need an experienced 3D CAD designer (using SolidWorks, Fusion 360, or Rhino) to conver...
3D Product Modeling
3D Product Rendering and Design
2D to 3D Conversion Services
PDF to CAD Conversion
Mechanical CAD Design
View job
CAD designer needed to model 3D flytrap to be fitted into universal 5 gal. bucket
Remote - Posted
I have a rough block drawing I need complete a 3d version. I need to also modify to include a bait net/shelf.
3D Product Modeling
Industrial Design Services
Product Engineering Services
View job
3D modelling for fashion accessory prototype
Remote - Posted
Prototype for fashion accessory / charm. Need 3D resin printing-ready files. 3 relatively simple shapes, three dimensional (eg heart, lemon, panda), with a vertical channel go...
3D Modeling
3D Product Modeling
Prototype Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
218,502
global members
33,607
projects delivered to clients
Trusted by
