Remote
Work location
Need 3D model for a Golf Putter (output in a stp file) Ended
About the job
Make a 3D CAD design for a golf putter.
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.... read more
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.... read more
Make a 3D CAD design for a golf putter.
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.
One-time job. Can lead to long term hire on the basis of quality. read less
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.
One-time job. Can lead to long term hire on the basis of quality. read less
Make a 3D CAD design for a golf putter.
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connec... read more
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connec... read more
Make a 3D CAD design for a golf putter.
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.
One-time job. Can lead to long term hire on the basis of quality. read less
It comprises of a shaft and a putter head.
-------------------------
Shaft Specifications
Three-Section Detachable Shaft:
Grip Section: 10" length, 1" diameter
Middle Section: 11" length, 0.5" diameter
Lower Section: 11" length, 0.5" diameter
Threading System:
Uniform thread size across all connections
Design must allow direct connection between grip section and lower section (bypassing middle section)
Thread size: Standard 5/16"-24 TPI (or designer recommendation for optimal strength)
All threaded connections must include internal stops to ensure consistent assembly depth
------------------------------------
Putter Head Specifications
Dimensions:
Width: 4.5" (symmetric from center)
Depth: 1" (consistent throughout)
Height: 3" total
Height Breakdown:
Main putter body: 2" height
Threaded connector section: 1" height (extending from top of putter head)
Design Features:
Perfectly symmetric design for ambidextrous use (left or right-handed)
Centered threaded connection point
Loft angle: 0°
Lie angle: 80°
Equal heel-toe weighting for stability
Note:
Putter Face must be plain in shape with no concavity
Shaft must attach at a single point to the head
Weight distribution must be balanced for either left or right-handed use
Need a 3d diagram of this entire unit. Need output in a stp or igs file.
Use the attached image only for reference. Use the above specified dimensions only.
One-time job. Can lead to long term hire on the basis of quality. read less
Things to know
Any
Skill Level
$10
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D CAD Modeling
3D Mechanical Design
3D Model Rendering
+1 more
Job categories
3D Design Services
3D CAD Translation Services
3D Modeling
3D Product Modeling
+1 more
About the client
Payment not ready
India (05:01 am)
Posted
Active
Job activity
25 Applicants
0 interviews in progress
Similar jobs
Design a 45 ft boat
Remote - Posted
Design a 45 ft boat in autocad and provide BOQ's for the boat
AutoCAD Design Services
AutoCAD Drafting & Design
3D Modeling
Marine Engineering Design Services
View job
Hi, I’m looking for someone to create a 3D tripod project using Onshape
Remote - Posted
I need a 3D tripod project using Onshape for my CCDi course.
It should have 3 extendable legs, a center support, and a rotating head for a phone or camera.
All parts must be...
3D Modeling
3D Product Modeling
3D Design Services
CAD Drafting Services
View job
Ship Exterior 3D Model Redesign for 3d printing
Remote - Posted
I need a 3D model of a ship for product visualization. The focus is on redesigning the ship's exterior.
Requirements:
- Redesign of the ship's exterior
- High-quality, de...
3D Modeling
View job
3D Furniture Visualization Artist
Remote - Posted
Looking for a skilled 3D furniture visualization designer to create realistic and high-quality renders for our product catalog. Experience with modeling, texturing, and render...
3D Modeling
3D Product Modeling
3D Interior Visualization
3D Furniture Rendering
3D Furniture Modeling Services
View job
3D Artist for Modular Renewable Energy System Visualization
Remote - Posted
HydroLeaf SafeNet™ Safety System
Every digester and generator includes HydroLeaf SafeNet™ — our robust residential methane safety suite:
• Quad-redundant CH₄/CO sensors for...
3D Rendering Services
3D Design Services
3D Modeling
View job
Vectric V-Carve wood frame design
Remote - Posted
Hello! I have some custom shaped picture frames that I need designed in V-Carve. Picture frame is to be carved in parts, so they can be nested and use as little wood as possib...
3D Design Services
View job
