Remote
Work location
Design Brief: Panel with Rounded Corners and Hole Positions Ended
About the job
We are building a shower focussed for commercial customers, that will be attached to a cold water system to allow us to provide a cold water shower to compliment our ice bath business. See attached the visuals of the end product. We are at the point of building a prototype and require a drawing to be completed to allow us to put the panels into production. The outcome needs to be something we can provide to a panel business who has sourced the material (Fundermax) and will CNC cut the panel for us. Details of the panel below:
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work.
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work.
We are building a shower focussed for commercial customers, that will be attached to a cold water system to allow us to provide a cold water shower to compliment our ice bath business. See attached the visuals of the end product. We are at the point of building a prototype and require a drawing to be completed to allow us to put the panels into production. The outcome needs to be something we can provide to a panel business who has sourced the material (Fundermax) and will CNC cut the panel for us. Details of the panel below:
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work.
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work.
We are building a shower focussed for commercial customers, that will be attached to a cold water system to allow us to provide a cold water shower to compliment our ice bath business. See attached the visuals of the end product. We are at the point of building a prototype and require a drawing to be completed to allow us to put the panels into production. The outcome needs to be something we can...
read more
We are building a shower focussed for commercial customers, that will be attached to a cold water system to allow us to provide a cold water shower to compliment our ice bath business. See attached the visuals of the end product. We are at the point of building a prototype and require a drawing to be completed to allow us to put the panels into production. The outcome needs to be something we can provide to a panel business who has sourced the material (Fundermax) and will CNC cut the panel for us. Details of the panel below:
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work. read less
Drawing Requirements
Panel Dimensions:
Overall height: 1400 mm
Overall width: 400 mm
Thickness: 13 mm
Corner radius: R50 mm
Hole Details:
Top hole:
Diameter: 15 mm
Center positioned 130 mm down from the top edge, centered horizontally
Bottom hole:
Diameter: 22 mm (for plastic piezo switch button)
Center positioned 175 mm up from the bottom edge, centered horizontally
Other Details:
Units: Millimeters (mm)
Draw the panel to scale, with rounded corners (R50 mm)
Include 2D front view (with all dimensions) and 3D extrusion showing 13 mm thickness
Clearly mark all hole centers and dimensions
Output Files Required:
.DWG (AutoCAD source file)
.DXF (for compatibility)
.PDF with visible dimensions for review
Please ask any questions needed to validate the brief before commencing work. read less
Things to know
Intermediate
Skill Level
Open budget
Hourly
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D CAD Design
2D CAD Drawings
2D Drafting
Job categories
2D Drawings and Floor Plans
2D CAD Drafting Services
2D CAD Design Services
About the client
Payment ready
United Kingdom (10:22 am)
Posted
Active
Job activity
27 Applicants
1 interviews in progress
More open jobs from this client (1)
2D & 3D Drawings Update for Ice Baths for use by architects and M&E teams
Remote - Posted
We would like to update the drawings we have of our products (specifically the frames) to include handover locations that architects and M&E teams can use as they them to help...
2D to 3D Modeling
2D CAD Drafting Services
View job
Similar jobs
Facility Plan Diagramming
Remote - Posted
We're a robotics/AI startup building an automated science laboratory, and we're planning our next facility. As part of our research, we want to map out a reference laboratory...
Architectural Drawing Services
Floor Plan Design
2D Drawings and Floor Plans
Architectural Drafting Services
View job
CAD designer for a 2D telecom site layout
Remote - Posted
The designs are from sketches for existing telecom sites
2D Drawings and Floor Plans
General CAD Drafting
CAD Drawing Services
View job
Autocad Draftsman / Autocad Drawing Services
Remote - Posted
Job Description: Technical AutoCAD Draftsman – Commercial Window Profiles
We are looking for an experienced AutoCAD Draftsman to create accurate, production-ready 2D shop d...
2D CAD Design Services
3D Design Services
3D Modeling
View job
Junior Architectural Drafter
Remote - Posted
Junior Architectural Drafter to issue CAD or SKETCHUP DRAWINGS ON SKETCH AND DETAILED BRIEF .
Architectural Drafting Services
General CAD Drafting
2D CAD Drafting Services
View job
CAD designer
Remote - Posted
We need a CAD designer full-time or part-time for our projects
Design & Drafting
2D CAD Design Services
3D Modeling
View job
Freelance Joinery Shop Drawings for Building Project- 44 Apartments
Dubai, United Arab Emirates - Posted
Prepare Joinery detailed shop drawings for Kitchen.
Approved Shop Drawing (of 1 Apartment) will be given to understand the details and concepts. Have to replicate similar c...
Shop Drawing Services
2D CAD Drafting Services
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
206,583
global members
33,347
projects delivered to clients
Trusted by
