Remote
Work location
Custom G-Code for Automating 3D Printing on Bambu X1C Ended
About the job
Custom G-Code for Automating 3D Printing on Bambu X1C
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and... read more
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and... read more
Custom G-Code for Automating 3D Printing on Bambu X1C
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and 0.8mm), covering necessary adjustments for each nozzle size.
I will provide an example G-code that can serve as a starting point, along with a video explaining the process used to create the example. You can either modify this or write your own G-code.
Requirements:
Experience with custom G-code scripting for 3D printers.
Familiarity with the Bambu X1C printer and its features.
Ability to create G-code that handles variable model sizes, filament types, and multiple build plates.
Knowledge of how to optimize G-code for 0.4mm, 0.6mm, and 0.8mm nozzles.
Ability to provide clear, user-friendly instructions for modifying the G-code.
Please provide examples of previous G-code or automation projects. I look forward to collaborating with a developer to streamline my 3D printing process.
This is a one-time project.
I m hoping to have this project complete & tested within 7 days
My budget is between $100.00-$200.00
Video Link:
https://www.youtube.com/watch?v=Vxj1ii6dPYo read less
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and 0.8mm), covering necessary adjustments for each nozzle size.
I will provide an example G-code that can serve as a starting point, along with a video explaining the process used to create the example. You can either modify this or write your own G-code.
Requirements:
Experience with custom G-code scripting for 3D printers.
Familiarity with the Bambu X1C printer and its features.
Ability to create G-code that handles variable model sizes, filament types, and multiple build plates.
Knowledge of how to optimize G-code for 0.4mm, 0.6mm, and 0.8mm nozzles.
Ability to provide clear, user-friendly instructions for modifying the G-code.
Please provide examples of previous G-code or automation projects. I look forward to collaborating with a developer to streamline my 3D printing process.
This is a one-time project.
I m hoping to have this project complete & tested within 7 days
My budget is between $100.00-$200.00
Video Link:
https://www.youtube.com/watch?v=Vxj1ii6dPYo read less
Custom G-Code for Automating 3D Printing on Bambu X1C
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Re... read more
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Re... read more
Custom G-Code for Automating 3D Printing on Bambu X1C
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and 0.8mm), covering necessary adjustments for each nozzle size.
I will provide an example G-code that can serve as a starting point, along with a video explaining the process used to create the example. You can either modify this or write your own G-code.
Requirements:
Experience with custom G-code scripting for 3D printers.
Familiarity with the Bambu X1C printer and its features.
Ability to create G-code that handles variable model sizes, filament types, and multiple build plates.
Knowledge of how to optimize G-code for 0.4mm, 0.6mm, and 0.8mm nozzles.
Ability to provide clear, user-friendly instructions for modifying the G-code.
Please provide examples of previous G-code or automation projects. I look forward to collaborating with a developer to streamline my 3D printing process.
This is a one-time project.
I m hoping to have this project complete & tested within 7 days
My budget is between $100.00-$200.00
Video Link:
https://www.youtube.com/watch?v=Vxj1ii6dPYo read less
I’m seeking an experienced developer to create custom G-code to automate the 3D printing process on a Bambu X1C printer using Bambu PETG HF filament and Bambu PLA Basic filament.
Key Requirements:
Model Ejection & Reset:
After each print, the printer should automatically eject the finished model from the print bed.
Automated Print Restart:
After ejection, the printer should begin the next print automatically without manual intervention.
Multiple Build Plates:
The G-code must support printing one model after another from different build plates. Each print should start on a cleared plate, and while models may slightly vary, they will generally be around 205mm x 158mm x 120mm. The code should account for minor size variations, and the instructions should clearly explain how to modify the code for different print sizes.
Nozzle Size Adjustment:
The G-code must work with 0.4mm, 0.6mm, and 0.8mm nozzles. The instructions should clearly outline how to modify the code when changing nozzles, covering adjustments to print speed, layer height, and other relevant settings.
Deliverables:
Two separate sets of G-code:
One set for Bambu PETG HF filament
One set for Bambu PLA Basic filament
Clear instructions that outline the process, including specific notes on usage.
Guidance on modifying G-code for:
Changes in model size (especially height) for proper ejection.
Changes in nozzle size (0.4mm, 0.6mm, and 0.8mm), covering necessary adjustments for each nozzle size.
I will provide an example G-code that can serve as a starting point, along with a video explaining the process used to create the example. You can either modify this or write your own G-code.
Requirements:
Experience with custom G-code scripting for 3D printers.
Familiarity with the Bambu X1C printer and its features.
Ability to create G-code that handles variable model sizes, filament types, and multiple build plates.
Knowledge of how to optimize G-code for 0.4mm, 0.6mm, and 0.8mm nozzles.
Ability to provide clear, user-friendly instructions for modifying the G-code.
Please provide examples of previous G-code or automation projects. I look forward to collaborating with a developer to streamline my 3D printing process.
This is a one-time project.
I m hoping to have this project complete & tested within 7 days
My budget is between $100.00-$200.00
Video Link:
https://www.youtube.com/watch?v=Vxj1ii6dPYo read less
Things to know
Expert
Skill Level
$200
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Printing
Process Automation
Python scripting
Job categories
CNC Programming
3D Printing Design
3D Printing Services
Computer Numerical Control
Software Developers
+2 more
Languages
English
Professional working proficiency
About the client
Payment ready
United States (06:31 pm)
Posted
Active
Job activity
6 Applicants
0 interviews in progress
More open jobs from this client (1)
3D Designer Needed for Customizable Insert Template Generators
Remote - Posted
Overview
I’m looking for an experienced and detail-oriented 3D designer to help develop a series of editable insert template generators for various drawer and compartment box...
3D Design Services
View job
Similar jobs
Mechanical Design for Heavy-Duty CNC Router (3800×1900 mm)
Remote - Posted
I need a mechanical engineer to design a CNC Router for woodworking (MDF panels).
Working area: 3800×1900 mm.
The structure must be made of steel with high rigidity.
I need...
Mechanical Design Services
Mechanical CAD Design
Mechanical Engineering
CNC Programming
View job
3-D print design
Remote - Posted
I'll share an image of the actual product I need designed. The output should be a .stl file.
3D Printing Design
3D Product Modeling
3D Models of Machine Parts
View job
3D Modeler for Realistic Baitfish Lure (Organic Sculpting for 3D Printing)
Remote - Posted
🇨🇦 About Forageform LuresForageform Lures is a new, Canadian-based swimbait company committed to producing top-tier, precision-engineered fishing lures. Our mission is to bypa...
3D Printing Design
3D Modeling
3D Sculpting Design
3D Product Modeling
3D Product Rendering and Design
View job
3D Print Design modification of existing Steamdeck carrying carrying design
Remote - Posted
We have a prototype design of a carrying case for a steamdeck but want to make some changes.
1. We want to change out the existing hinge mechanism for a zipper to make it mo...
3D Printing Design
3D Product Modeling
3D Product Rendering and Design
View job
MTech Structural 3D Printing Project
Remote - Posted
I need a complete MTech-level project in Aerospace or Automobile Engineering that involves 3D printing, CAD design, FEA/CFD analysis, and a small MATLAB component.
The topi...
Structural Design Services
3D Printing Design
3D Modeling
Mechanical Engineering
3D Printing Services
View job
Autodesk Powermill job to process a CAD part and create G code
Remote - Posted
My name is Pete Flentje from Australia and I am looking for someone to help out with a Powermill project. I make axes and axe handles and I am looking for someone to process m...
CNC Programming
View job
