Remote
Work location
Souvenir fridge magnet Anyone
About the job
I am looking for a highly experienced CAD designer specialising in ZAMAK pressure die casting to develop an original 3D tourist souvenir magnet featuring a UK landmark.
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally h... read more
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally h... read more
I am looking for a highly experienced CAD designer specialising in ZAMAK pressure die casting to develop an original 3D tourist souvenir magnet featuring a UK landmark.
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally handle both the vector preparation and the complete 3D CAD modelling.
Please provide examples of previous ZAMAK die-cast products, metal souvenirs or similar manufacturing projects, together with your estimated price and delivery time.
All final CAD files and intellectual property rights must be transferred to me under a written agreement after payment. read less
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally handle both the vector preparation and the complete 3D CAD modelling.
Please provide examples of previous ZAMAK die-cast products, metal souvenirs or similar manufacturing projects, together with your estimated price and delivery time.
All final CAD files and intellectual property rights must be transferred to me under a written agreement after payment. read less
I am looking for a highly experienced CAD designer specialising in ZAMAK pressure die casting to develop an original 3D tourist souvenir magnet featuring a UK landmark.
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a... read more
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a... read more
I am looking for a highly experienced CAD designer specialising in ZAMAK pressure die casting to develop an original 3D tourist souvenir magnet featuring a UK landmark.
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally handle both the vector preparation and the complete 3D CAD modelling.
Please provide examples of previous ZAMAK die-cast products, metal souvenirs or similar manufacturing projects, together with your estimated price and delivery time.
All final CAD files and intellectual property rights must be transferred to me under a written agreement after payment. read less
1. Dimensions and construction
* Magnet size: approximately 75–80 mm wide.
* Hollow construction.
* Rear wall thickness: approximately 1–1.2 mm.
* The rear must follow and mirror the shape and relief of the front, not be a flat plate.
* Two recessed circular magnet pockets on the back.
2. Design and 2D vector preparation
* Professional 2D vector preparation, correction and optimisation for metal casting.
* Detailed architectural landmark relief.
* Two realistic organic lions, requiring properly sculpted 3D geometry rather than simple extruded shapes.
* All fine details must be suitable for ZAMAK pressure die casting.
3. Technical CAD and manufacturing requirements
* Fully closed, watertight solid body.
* True CAD B-Rep/NURBS geometry, not polygon mesh or faceted geometry.
* Correct wall thickness and transitions.
* Appropriate draft angles (approximately 1.5–3°) for pressure die casting.
* No open surfaces, naked edges or non-manifold geometry.
* No STL-only or mesh-based deliverables.
* Final editable native CAD file and STEP file (IGES also preferred).
I need a designer who understands the complete workflow, from 2D vector preparation and organic 3D sculpting to a fully manufacturable CAD solid model for ZAMAK pressure die casting.
Please confirm that you can personally handle both the vector preparation and the complete 3D CAD modelling.
Please provide examples of previous ZAMAK die-cast products, metal souvenirs or similar manufacturing projects, together with your estimated price and delivery time.
All final CAD files and intellectual property rights must be transferred to me under a written agreement after payment. read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Architectural Design
3D Architectural Modeling
3D CAD Design
3D CAD Modeling
3D Jewelry Design
3D Mechanical Design
3D Modeling
3D Organic Sculpting
+5 more
Job categories
3D Modeling
3D Design Services
Product Engineering Services
Industrial Design Services
3D Printing Design
+2 more
About the client
Payment not ready
United Kingdom (01:40 am)
Posted
Active
Job activity
10 Applicants
0 interviews in progress
3 unanswered invites
Similar jobs
Panel Map Designer
Remote - Posted
My company is framing an apartment building and is in need of a professional to take our architectural and structural drawings and supply us with a detailed panel map. In addi...
3D CAD Translation Services
3D Design Services
3D Modeling
View job
CAD Designer Needed – Custom Wallet Chain Clip Design
Remote - Posted
Hi there,
My name is Salvador, and my business partner and I are looking for a CAD designer to assist us with an existing wallet-chain project.
We have the entire wallet...
3D Design Services
3D Modeling
Engineering Design
View job
Help with a build for a prototype
United States - Posted
I am working to build a project in autodesk fusion, and when I go to do test it keeps coming back errors. I need help to work through this.
Design Engineering Services
3D Design Services
3D Modeling
View job
PCB redesign
Remote - Posted
Looking for a reliable PCB designer in Kicad, to make minor redesign of an existing PCB and analyse it to improve potential problems. PCB is for Radxa CM5.
PCB Design Services
3D Design Services
3D Modeling
View job
Geometric and material Nonlinear Modelling
Saudi Arabia - Posted
Geometric and material Nonlinear Modelling of Catchment 2-layered Mesh supported on 25 m high towers, spaced 15m for protection of 25m wide, 17 m high Building from 200 kg Dr...
3D Modeling
FEA Finite Element Analysis
3D Design Services
View job
Air purifier
Remote - Posted
I have a technology to purify air via water, want an macanical enginer to execute that
Product Engineering Services
Electronic Enclosures Design
HVAC Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
221,340
global members
33,595
projects delivered to clients
Trusted by
