Mechanical CAD Design (SolidWorks / Fusion 360) for Portable CO2 Carbonation Valve Prototype (CNC-Ready) Anyone

About the job

Project Title: Project Title: Mechanical CAD Design (SolidWorks / Fusion 360) for Portable CO2 Carbonation Valve Prototype (CNC-Ready)
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated concept model, and I now need a Mechanical Design Engineer to create CNC-ready 3D CAD files and 2D manufacturing drawings for a functional Proof-of-Concept (PoC) prototype.
​Important Scope Constraint (Keep Cost Lean):
​Do NOT design a custom double-wall vacuum-insulated bottle body for this phase.
​To keep prototyping costs low, this V1 scope is strictly for the bottom carbonation valve assembly plus a threaded adapter ring designed to mate with an existing off-the-shelf wide-mouth stainless steel bottle (or standard pressure-rated test cylinder).
​Technical Specifications & Constraints:
​CO2 Source: Standard 16g threaded CO2 cartridge with a 3/8"-24 UNF female threaded port (approx. 8.5 mm pilot hole, 45° lead-in chamfer, O-ring face/radial seal seat).
​Operating Pressure: 60–90 PSI (~4.1–6.2 bar) normal working pressure; safety factor of 3x–4x burst resistance.
​Primary Structural Material: AISI 316L Stainless Steel (and/or brass for internal valve seats/inserts where appropriate for prototyping).
​Sealing & Thermodynamics (Joule-Thomson Effect): Rapid CO2 expansion cause... read more
Project Title: Project Title: Mechanical CAD Design (SolidWorks / Fusion 360) for Portable CO2 Carbonation Valve Prototype (CNC-Ready)
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated concept model, and I now need a Mechanical Design Engineer to create CNC-ready 3D CAD files and 2D manufacturing drawings for a functional Proof-of-Concept (PoC) prototype.
​Important Scope Constraint (Keep Cost Lean):
​Do NOT design a custom double-wall vacuum-insulated bottle body for this phase.
​To keep prototyping costs low, this V1 scope is strictly for the bottom carbonation valve assembly plus a threaded adapter ring designed to mate with an existing off-the-shelf wide-mouth stainless steel bottle (or standard pressure-rated test cylinder).
​Technical Specifications & Constraints:
​CO2 Source: Standard 16g threaded CO2 cartridge with a 3/8"-24 UNF female threaded port (approx. 8.5 mm pilot hole, 45° lead-in chamfer, O-ring face/radial seal seat).
​Operating Pressure: 60–90 PSI (~4.1–6.2 bar) normal working pressure; safety factor of 3x–4x burst resistance.
​Primary Structural Material: AISI 316L Stainless Steel (and/or brass for internal valve seats/inserts where appropriate for prototyping).
​Sealing & Thermodynamics (Joule-Thomson Effect): Rapid CO2 expansion causes localized freezing. Must specify food-grade FKM or cross-linked EPDM O-rings rated against Rapid Gas Decompression (RGD), with proper AS568 gland/groove tolerances.
​Valve Functionality (Multi-Refill):
​Base-mounted sub-surface gas injection (sparging) with a check valve / anti-backflow mechanism so liquid cannot enter the gas chamber.
​Controlled gas release (manual push-button/twist metering valve OR compact pressure-regulated release) allowing multiple carbonation cycles from a single 16g cartridge.
​Integrated mechanical overpressure relief valve calibrated around ~75–90 PSI and a safe pressure-venting mechanism before opening.
​Required Deliverables:
​1. Native 3D CAD Assembly + Universal .STEP / .IGES files ready for 3-axis / 5-axis CNC machining.
​2. 2D Engineering Drawings (.PDF) with critical tolerances (GD&T), thread callouts, surface finishes, and O-ring groove dimensions.
​3. Complete Bill of Materials (BOM) identifying custom CNC parts vs. standard off-the-shelf hardware (springs, pins, O-rings, check valves, relief valves).
​4. Brief Assembly & Pressure-Test Notes for safe hydro-testing prior to live CO2 testing.
​To Apply, Please Include:
​1. Examples of past CAD work involving pressurized systems, pneumatic/fluid valves, CO2 mechanisms, or tight-tolerance CNC assemblies.
​2. Which CAD software you use (SolidWorks, Fusion 360, Creo, etc.).
​3. An estimated fixed price and timeline to deliver the complete CAD + BOM package (excluding physical manufacturing).
​4. Confirmation that you will sign an NDA / IP Assignment Agreement prior to receiving the full engineering study PDF and visual model.
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated concept model, and I now need a Mechanical Design Engineer to create CNC-ready 3D CAD files and 2D manufacturing drawings for a functional Proof-of-Concept (PoC) prototype.
​Important Scope Constraint (Keep Cost Lean):
​Do NOT design a custom double-wall vacuum-insulated bottle body for this phase.
​To keep prototyping costs low, this V1 scope is strictly for the bottom carbonation valve assembly plus a threaded adapter ring designed to mate with an existing off-the-shelf wide-mouth stainless steel bottle (or standard pressure-rated test cylinder).
​Technical Specifications & Constraints:
​CO2 Source: Standard 16g threaded CO2 cartridge with a 3/8"-24 UNF female threaded port (approx. 8.5 mm pilot hole, 45° lead-in chamfer, O-ring face/radial seal seat).
​Operating Pressure: 60–90 PSI (~4.1–6.2 bar) normal working pressure; safety factor of 3x–4x burst resistance.
​Primary Structural Material: AISI 316L Stainless Steel (and/or brass for internal valve seats/inserts where appropriate for prototyping).
​Sealing & Thermodynamics (Joule-Thomson Effect): Rapid CO2 expansion causes localized freezing. Must specify food-grade FKM or cross-linked EPDM O-rings rated against Rapid Gas Decompression (RGD), with proper AS568 gland/groove tolerances.
​Valve Functionality (Multi-Refill):
​Base-mounted sub-surface gas injection (sparging) with a check valve / anti-backflow mechanism so liquid cannot enter the gas chamber.
​Controlled gas release (manual push-button/twist metering valve OR compact pressure-regulated release) allowing multiple carbonation cycles from a single 16g cartridge.
​Integrated mechanical overpressure relief valve calibrated around ~75–90 PSI and a safe pressure-venting mechanism before opening.
​Required Deliverables:
​1. Native 3D CAD Assembly + Universal .STEP / .IGES files ready for 3-axis / 5-axis CNC machining.
​2. 2D Engineering Drawings (.PDF) with critical tolerances (GD&T), thread callouts, surface finishes, and O-ring groove dimensions.
​3. Complete Bill of Materials (BOM) identifying custom CNC parts vs. standard off-the-shelf hardware (springs, pins, O-rings, check valves, relief valves).
​4. Brief Assembly & Pressure-Test Notes for safe hydro-testing prior to live CO2 testing.
​To Apply, Please Include:
​1. Examples of past CAD work involving pressurized systems, pneumatic/fluid valves, CO2 mechanisms, or tight-tolerance CNC assemblies.
​2. Which CAD software you use (SolidWorks, Fusion 360, Creo, etc.).
​3. An estimated fixed price and timeline to deliver the complete CAD + BOM package (excluding physical manufacturing).
​4. Confirmation that you will sign an NDA / IP Assignment Agreement prior to receiving the full engineering study PDF and visual model. read less
Project Title: Project Title: Mechanical CAD Design (SolidWorks / Fusion 360) for Portable CO2 Carbonation Valve Prototype (CNC-Ready)
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated... read more
Project Title: Project Title: Mechanical CAD Design (SolidWorks / Fusion 360) for Portable CO2 Carbonation Valve Prototype (CNC-Ready)
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated concept model, and I now need a Mechanical Design Engineer to create CNC-ready 3D CAD files and 2D manufacturing drawings for a functional Proof-of-Concept (PoC) prototype.
​Important Scope Constraint (Keep Cost Lean):
​Do NOT design a custom double-wall vacuum-insulated bottle body for this phase.
​To keep prototyping costs low, this V1 scope is strictly for the bottom carbonation valve assembly plus a threaded adapter ring designed to mate with an existing off-the-shelf wide-mouth stainless steel bottle (or standard pressure-rated test cylinder).
​Technical Specifications & Constraints:
​CO2 Source: Standard 16g threaded CO2 cartridge with a 3/8"-24 UNF female threaded port (approx. 8.5 mm pilot hole, 45° lead-in chamfer, O-ring face/radial seal seat).
​Operating Pressure: 60–90 PSI (~4.1–6.2 bar) normal working pressure; safety factor of 3x–4x burst resistance.
​Primary Structural Material: AISI 316L Stainless Steel (and/or brass for internal valve seats/inserts where appropriate for prototyping).
​Sealing & Thermodynamics (Joule-Thomson Effect): Rapid CO2 expansion causes localized freezing. Must specify food-grade FKM or cross-linked EPDM O-rings rated against Rapid Gas Decompression (RGD), with proper AS568 gland/groove tolerances.
​Valve Functionality (Multi-Refill):
​Base-mounted sub-surface gas injection (sparging) with a check valve / anti-backflow mechanism so liquid cannot enter the gas chamber.
​Controlled gas release (manual push-button/twist metering valve OR compact pressure-regulated release) allowing multiple carbonation cycles from a single 16g cartridge.
​Integrated mechanical overpressure relief valve calibrated around ~75–90 PSI and a safe pressure-venting mechanism before opening.
​Required Deliverables:
​1. Native 3D CAD Assembly + Universal .STEP / .IGES files ready for 3-axis / 5-axis CNC machining.
​2. 2D Engineering Drawings (.PDF) with critical tolerances (GD&T), thread callouts, surface finishes, and O-ring groove dimensions.
​3. Complete Bill of Materials (BOM) identifying custom CNC parts vs. standard off-the-shelf hardware (springs, pins, O-rings, check valves, relief valves).
​4. Brief Assembly & Pressure-Test Notes for safe hydro-testing prior to live CO2 testing.
​To Apply, Please Include:
​1. Examples of past CAD work involving pressurized systems, pneumatic/fluid valves, CO2 mechanisms, or tight-tolerance CNC assemblies.
​2. Which CAD software you use (SolidWorks, Fusion 360, Creo, etc.).
​3. An estimated fixed price and timeline to deliver the complete CAD + BOM package (excluding physical manufacturing).
​4. Confirmation that you will sign an NDA / IP Assignment Agreement prior to receiving the full engineering study PDF and visual model.
​Project Overview:
I am developing a portable carbonated beverage bottle featuring a bottom-mounted CO2 injection mechanism capable of carbonating water across multiple refills. I have a comprehensive physics/engineering feasibility study (PDF) and an illustrated concept model, and I now need a Mechanical Design Engineer to create CNC-ready 3D CAD files and 2D manufacturing drawings for a functional Proof-of-Concept (PoC) prototype.
​Important Scope Constraint (Keep Cost Lean):
​Do NOT design a custom double-wall vacuum-insulated bottle body for this phase.
​To keep prototyping costs low, this V1 scope is strictly for the bottom carbonation valve assembly plus a threaded adapter ring designed to mate with an existing off-the-shelf wide-mouth stainless steel bottle (or standard pressure-rated test cylinder).
​Technical Specifications & Constraints:
​CO2 Source: Standard 16g threaded CO2 cartridge with a 3/8"-24 UNF female threaded port (approx. 8.5 mm pilot hole, 45° lead-in chamfer, O-ring face/radial seal seat).
​Operating Pressure: 60–90 PSI (~4.1–6.2 bar) normal working pressure; safety factor of 3x–4x burst resistance.
​Primary Structural Material: AISI 316L Stainless Steel (and/or brass for internal valve seats/inserts where appropriate for prototyping).
​Sealing & Thermodynamics (Joule-Thomson Effect): Rapid CO2 expansion causes localized freezing. Must specify food-grade FKM or cross-linked EPDM O-rings rated against Rapid Gas Decompression (RGD), with proper AS568 gland/groove tolerances.
​Valve Functionality (Multi-Refill):
​Base-mounted sub-surface gas injection (sparging) with a check valve / anti-backflow mechanism so liquid cannot enter the gas chamber.
​Controlled gas release (manual push-button/twist metering valve OR compact pressure-regulated release) allowing multiple carbonation cycles from a single 16g cartridge.
​Integrated mechanical overpressure relief valve calibrated around ~75–90 PSI and a safe pressure-venting mechanism before opening.
​Required Deliverables:
​1. Native 3D CAD Assembly + Universal .STEP / .IGES files ready for 3-axis / 5-axis CNC machining.
​2. 2D Engineering Drawings (.PDF) with critical tolerances (GD&T), thread callouts, surface finishes, and O-ring groove dimensions.
​3. Complete Bill of Materials (BOM) identifying custom CNC parts vs. standard off-the-shelf hardware (springs, pins, O-rings, check valves, relief valves).
​4. Brief Assembly & Pressure-Test Notes for safe hydro-testing prior to live CO2 testing.
​To Apply, Please Include:
​1. Examples of past CAD work involving pressurized systems, pneumatic/fluid valves, CO2 mechanisms, or tight-tolerance CNC assemblies.
​2. Which CAD software you use (SolidWorks, Fusion 360, Creo, etc.).
​3. An estimated fixed price and timeline to deliver the complete CAD + BOM package (excluding physical manufacturing).
​4. Confirmation that you will sign an NDA / IP Assignment Agreement prior to receiving the full engineering study PDF and visual model. read less

Things to know

Job location

Remote

Work location

Job skill level

Any

Skill Level

Job rate

$2,500

Fixed-rate (USD)

Job type

Part-time

Job type

Job length

Under 1-month

Job duration

Areas of expertise

3D CAD Assemblies & Parts 3D CAD Modeling 3D CAD Parts 3D CAD Parts & Assemblies 3D Design and Modeling 3D Mechanical Assembly 3D Mechanical Design 3D Modeling SolidWorks +5 more

Job categories

Mechanical CAD Design CNC Programming 3D Modeling Machine Design Prototype Design Services +2 more

About the client

Payment not ready

Israel (09:12 pm)

Posted

Active

Job activity

3 Applicants

0 interviews in progress

Similar jobs

Solid Wood Furniture CAD/CAM Engineer (Rhino 8, Grasshopper & AlphaCAM Multi-Axis CNC)

Shah Alam, Malaysia - Posted
We are a custom solid wood furniture manufacturer specializing in American White Oak, Ash, and European Beech. We are seeking an experienced Furniture CAD/CAM Engineer to conv...
3D Modeling Machine Design Furniture Design and Engineering Services Furniture Design
View job

Commercial design

Remote - Posted
My name is Kulwinder and contacting from Cygnus, we are a group of companies in Dubai. We are currently located in Emaar Square Dubai. We are expanding our office and want to...
3D Design Services Architectural Planning and Design 3D Modeling
View job

Convert a PDF to DWG for a site plan

Remote - Posted
Convert pdf site plan to DWG so that we could use it in autocad.
2D CAD Drafting Services 3D Design Services 3D Modeling
View job

Prototype Exercise Equipment Blueprint/CAD Program and Questions

Mckinney, United States - Posted
Hello, I'm looking for someone to help me come up with the design of a protype for a piece of workout equipment. I put and ai image of roughly what I'm looking for (will discu...
Exercise Equipment Design Product Engineering Services Mechanical Design Services Prototype Design Services
View job

Oscillating power tool saw blade

Remote - Posted
I am looking to produce a prototype of a steel saw blade. The material will need to be thin sheet metal, laser cut to very specific geometry + metal bending. I need help modif...
Sheet Metal Design Prototype Design Services Mechanical Design Services
View job

3D LED MASK 3D DESIGN

Remote - Posted
I NEED A 3D DESIGN, I ALREADY HAVE A DESIGN AND I JUST WANT SOMEONE TO MAKE IT 3D
3D Design Services 3D Printing Design 3D Modeling 3D Product Modeling 3D Product Rendering and Design
View job

How it works

Find hourly jobs

Find hourly jobs

Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs

Fixed-rate jobs

Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests

Design contests

Experts build a reputation and earn prizes by participating in design challenges.

About Cad Crowd

4.9/5.0

(Our client satisfaction)

G2 2022

Spring high performer

223,708

global members

33,595

projects delivered to clients


Trusted by
US Army Corps of Engineers
Tiffany
BCG
Target
KPMG
Xprize

Find freelance & remote jobs

Your next big opportunity is just a click away. Create a free profile and start finding work tailored to your skills.