India
Work location
Underwater Enclosure for Scanning Echo Sounder Ended
About the job
Underwater Ultrasonic Mechanical Scanning Device
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:... read more
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:... read more
Underwater Ultrasonic Mechanical Scanning Device
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:
1. Custom made Single beam echo sounder.
2. Stepper motor and driver.
3. Raspberry PI for controlling the stepper motor and the echosounder device. Storing the echo output on the onboard memory.
4. Waterproof enclosure.(poly carbonate or aluminum preferred).
5. Battery functionality up to 8hours.
6. Any other required accessories/hardware parts.
Ideal candidates should have experience in mechanical engineering, solid works, ultrasonic systems, and underwater device development. read less
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:
1. Custom made Single beam echo sounder.
2. Stepper motor and driver.
3. Raspberry PI for controlling the stepper motor and the echosounder device. Storing the echo output on the onboard memory.
4. Waterproof enclosure.(poly carbonate or aluminum preferred).
5. Battery functionality up to 8hours.
6. Any other required accessories/hardware parts.
Ideal candidates should have experience in mechanical engineering, solid works, ultrasonic systems, and underwater device development. read less
Underwater Ultrasonic Mechanical Scanning Device
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to de... read more
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to de... read more
Underwater Ultrasonic Mechanical Scanning Device
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:
1. Custom made Single beam echo sounder.
2. Stepper motor and driver.
3. Raspberry PI for controlling the stepper motor and the echosounder device. Storing the echo output on the onboard memory.
4. Waterproof enclosure.(poly carbonate or aluminum preferred).
5. Battery functionality up to 8hours.
6. Any other required accessories/hardware parts.
Ideal candidates should have experience in mechanical engineering, solid works, ultrasonic systems, and underwater device development. read less
-------------------------------------------------
We are seeking an expert to design and develop an underwater FORWARD LOOKING SONAR with mechanically rotating capability ( 0 to 180degrees)
The project involves mechanical design, ultrasonic technology integration, and underwater operational considerations. The objective of this project is to develop a underwater mechanical scanning sonar system capable of retrieving the full echo response output from the single beam echo sounder device. This device is intended to use in shallow waters such as ponds and lakes of max depth of 20 feet. The range covering is targeted at 50meters.
The system will use a Single beam sonar device (Transducer + integrated processing electronics to produce full echo profile output) with 500KHz frequency and narrow beamwidth.
The device is mounted on a base using a stepper motor and will rotate from 0° to 180°, obtained full echo response at each step. These measurements will be stored on an onboard memory of the controlling unit like Raspberry Pi. The sonar device will be in the water for not more than 10 scans (or full 180 degree rotations). It will be taken out from the water after taking 10 scans.
The whole system should be secured with an IP68 rating waterproof enclosure. This power source for this entire prototype (Sonar device, stepper motor, raspberyPi etc..) should be Lithium battery pack.
The main parts of this prototype are:
1. Custom made Single beam echo sounder.
2. Stepper motor and driver.
3. Raspberry PI for controlling the stepper motor and the echosounder device. Storing the echo output on the onboard memory.
4. Waterproof enclosure.(poly carbonate or aluminum preferred).
5. Battery functionality up to 8hours.
6. Any other required accessories/hardware parts.
Ideal candidates should have experience in mechanical engineering, solid works, ultrasonic systems, and underwater device development. read less
Things to know
Any
Skill Level
$500
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Design
3D Modeling
3D Modeling SolidWorks
Electrical Engineering
Machine Design
+2 more
Job categories
Mechanical Design Services
CAD Drawing Services
SolidWorks Design Services
About the client
Payment ready
United States (03:57 am)
Posted
Active
Job activity
22 Applicants
2 interviews in progress
More open jobs from this client (4)
PCB testing and firmware development for acoustic transducer
Remote - Posted
THIS PROJECT HAS TWO PARTS
*. Existing PCB Verification, Testing & Validation
*. Developing firmware for the burst generation & echo processing
Existing PCB Verification,...
Electronic Prototyping and Design Services
PCB Design Services
Firmware Developers
View job
Ultrasonic Transducer AFE / Pulser-Receiver Electronics Development
Remote - Posted
NOTE: Looking for a professional to handle the below project in "Hyderabad City, TELANGANA STATE, INDIA".
Objective: The goal is to design and develop functional prototype...
Electrical Engineering
Engineering Design
Electronics Design Service
View job
Ultrasonic Transducer AFE / Pulser-Receiver Electronics Development
Remote - Posted
Objective: The goal is to design and develop functional prototype AFE(Analog Front End)/pulser-receiver system that can directly interface with any raw underwater transducer (...
Electronic Prototyping and Design Services
3D Design Services
3D Modeling
View job
Underwater Scanning Sonar - LOCAL ONLY (Connecticut)
Remote - Posted
I'm seeking an experienced local freelancer (in state of Connecticut) to help mount an underwater sensor on a stepper motor for 180-degree scanning capabilities. The sensor wi...
Engineering Design
3D Design Services
3D Modeling
View job
Similar jobs
looking for 3D solidworks design for automatic chain link fence machine
Remote - Posted
Looking for 3D SolidWorks Model & Manufacturing Drawings for Automatic Chain-Link Fence Machine
Description:
I am looking for an experienced Mechanical Design Engineer to...
Mechanical Design Services
SolidWorks Design Services
Machine Design
View job
solidworks design automatic chain link fence machine
Remote - Posted
I am looking for a 3D CAD design of an Automatic Chain Link Fence Machine using SolidWorks.
Project Requirements:
1. Complete 3D Assembly (.sldasm) and Part files (.sldprt)...
Engineering Design
3D Modeling
SolidWorks Design Services
View job
Solidworks drawings for electrical equipment and
Remote - Posted
Looking for someone who has experience in solid works and engineering drawings for product design
SolidWorks Design Services
Industrial Design Services
Manufacturing Drawings
Electrical Engineering
View job
CNC Machine Shops Needed – Real Production Machining Data (Fusion 360 CAM)
Remote - Posted
We are looking for CNC machine shops and authorized manufacturing data suppliers who can provide original files from real, previously completed 3-axis CNC milling jobs using A...
Mechanical Design Services
Manufacturing Drawings
CNC Programming
View job
Industrial or Mechanical Designer needed for Haunted House Advent Calendar Design and Prototype
Remote - Posted
Hi there!
I'm looking for an experienced mechanical or product designer to help transform a series of concept images into a fully developed, manufacturable 3D design for a...
Mechanical Design Services
Industrial Design Services
3D Architectural Modeling
Prototype Design Services
Product Engineering Services
View job
Lightsport aircraft
Remote - Posted
PROJECT TITLE:
CAD Engineering Specialist Required: 600kg Microlight Adaptation of Ercoupe 415-C/D Blueprints
PROJECT OVERVIEW:
I am scratch-building a modern 3-axis microl...
CAD Conversion Services
Aerospace Engineering
Mechanical Design Services
Design Engineering Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
216,762
global members
33,572
projects delivered to clients
Trusted by
