Remote
Work location
Senior Mechanical Engineer – Independent Design Review of Smart Floor Drain Anyone
About the job
I have an existing CAD design for a smart floor drain system and I am looking for an experienced mechanical/product development engineer to perform an independent engineering review before prototype manufacturing and tooling.
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.`
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.`
I have an existing CAD design for a smart floor drain system and I am looking for an experienced mechanical/product development engineer to perform an independent engineering review before prototype manufacturing and tooling.
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.`
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.`
I have an existing CAD design for a smart floor drain system and I am looking for an experienced mechanical/product development engineer to perform an independent engineering review before prototype manufacturing and tooling.
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
•... read more
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
•... read more
I have an existing CAD design for a smart floor drain system and I am looking for an experienced mechanical/product development engineer to perform an independent engineering review before prototype manufacturing and tooling.
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.` read less
The current design includes:
• Stainless-steel drain cover
• Removable hair strainer
• Replaceable activated-carbon odor-control cartridge
• Silicone one-way valve
• Injection-molded PP housing
I need a critical engineering review of the existing design, not a new cosmetic design.
The review should focus on:
• Water-flow path and potential flow restrictions
• Silicone one-way valve design, opening pressure and reliable closing
• Odor and reverse-airflow prevention
• Hair collection and potential clogging
• Activated-carbon cartridge effectiveness and whether it adds real functional value
• Injection molding / DFM
• Tolerances, assembly and serviceability
• Potential failure modes
• Recommendations for design improvements
• Prototype testing plan with measurable acceptance criteria
Experience with fluid flow, silicone/elastomer valves, injection-molded products, DFM and physical prototype testing is strongly preferred.
The first phase is an independent design review only. If the review is successful, there may be a second phase for design optimization and prototype development.` read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
ANSYS Fluent
Design for Manufacture and Assembly (DFMA)
Fluid Dynamics
Fluid Flow Analysis
Injection Molding
Mechanical Engineering
Plastic Part Design
Product Validation and Verification
Tolerance Analysis
+6 more
Job categories
Product Engineering Services
Mechanical Design Services
Mechanical Engineering
Design Engineering Services
+1 more
About the client
Payment ready
Saudi Arabia (02:45 pm)
Posted
Active
Job activity
44 Applicants
0 interviews in progress
More open jobs from this client (3)
Innovative Floor Drain Cartridge Design & Improvement
Remote - Posted
am looking for the best-qualified engineer who can not only review the existing design, but significantly improve it and develop innovative mechanical solutions for the floor...
Product Engineering Services
Mechanical Design Services
Prototype Design Services
Machine Design
View job
Smart Floor Drain Design
Remote - Posted
Hi,
I have an existing Smart Floor Drain design created in Fusion 360. I have two files:
* Assembly.f3z
* Assembly v12.step
Before starting the project, I would like y...
Prototype Design Services
Mechanical Design Services
Product Engineering Services
Engineering Design
View job
Senior Mechanical/Product Engineer – Smart Floor Drain Design Review, DFM, Silicone Valve & Prototype Validation
Remote - Posted
نعم. الأفضل أن يكون الإعلان صارمًا وواضحًا في المخرجات حتى لا يتقدم مجرد مصمم CAD بينما المطلوب فعليًا مهندس تطوير منتجات ومراجعة هندسية قبل الـPrototype والقالب.
هذه صيغة...
Design for Manufacturability (DFM Services)
Product Engineering Services
Prototype Design Services
Mechanical Design Services
View job
Similar jobs
Electronics Engineer – PCB Sourcing & Manufacturing
Remote - Posted
Electronics Engineer – PCB Sourcing & Manufacturing
We are looking for an experienced, technically skilled Electronics Engineer to manage PCB sourcing and manufacturing for...
Product Engineering Services
Electronic Prototyping and Design Services
Electrical Engineering
Electronics Design Service
PCB Design Services
View job
.STP file creator for CNC machine shop
Remote - Posted
Generate .STP files for CNC machine shop.
Sketches/ drawings with dimensions already exist for all parts.
SolidWorks Design Services
3D Modeling
3D Product Modeling
Mechanical Design Services
View job
Hardware Engineer / PCB Designer – Radxa CM5 (RK3588) Carrier Board Development
Remote - Posted
We are looking for an experienced Hardware Engineer / PCB Designer to develop a custom Carrier Board for the Radxa CM5 (RK3588S2) module.
The project will be based primaril...
Engineering Design
Electronics Design Service
Electronic Prototyping and Design Services
PCB Design Services
Mechanical Engineering
View job
Plastic enclosure for elecric plug.
Remote - Posted
I need 3D design for molding the small plastic part.
Product Engineering Services
Industrial Design Services
3D Modeling
View job
Pipe Stress Analysis Model Replication
Remote - Posted
We require a freelance Piping Stress Engineer to replicate an existing pipe stress analysis calculation for a Rooftop Chiller Yard piping system by constructing a 3D model in...
Mechanical Engineering
3D Design Services
3D Modeling
View job
Dispositivo medico de cierre venoso tipo cerclaje / “Medical device for venous closure using a cerclage-type mechanism.”
Remote - Posted
Hola, busco un ingeniero mecánico o biomédico con experiencia en mecanismos miniaturizados y desarrollo de dispositivos médicos.
Necesito resolver un mecanismo de pequeño diá...
Medical Devices Design
Design Engineering Services
Mechanical Engineering
Prototype Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
214,178
global members
33,477
projects delivered to clients
Trusted by
