Mechanical Design Engineer – Collapsible / Deployable Consumer Product (Feasibility & Concept Development) Anyone

About the job

Project type: Mechanical engineering, mechanism design, feasibility assessment and prototyping

Project description

I am the founder of an early-stage consumer product startup developing an innovative portable product that requires a compact, collapsible structure capable of becoming substantially rigid and stable when deployed.

I am looking for an experienced mechanical design engineer to investigate, compare and recommend technically feasible solutions to this challenge.

This is a commercial startup project, not an academic research or open-ended R&D exercise. The objective is to identify a practical, cost-effective engineering solution that can be prototyped, validated and ultimately manufactured at scale.

We are working with startup budget constraints, so I am looking for someone who can balance engineering performance with simplicity, manufacturability, development time and cost.

The engineering challenge

The product requires a structure that:

- Collapses into a compact configuration for storage and transportation.
- Expands into a stable, substantially rigid structure during use.
- Resists deformation under normal hand-grip pressure, including radial compression.
- Resists unintended axial collapse and twisting.
- Remains securely deployed until deliberately released or collapsed.
- Withstands repeated deployment and collapse cycles.
- Uses lightweight, durable materials suitable for consumer products.
- Is practical and cost-effective to m... read more
Project type: Mechanical engineering, mechanism design, feasibility assessment and prototyping

Project description

I am the founder of an early-stage consumer product startup developing an innovative portable product that requires a compact, collapsible structure capable of becoming substantially rigid and stable when deployed.

I am looking for an experienced mechanical design engineer to investigate, compare and recommend technically feasible solutions to this challenge.

This is a commercial startup project, not an academic research or open-ended R&D exercise. The objective is to identify a practical, cost-effective engineering solution that can be prototyped, validated and ultimately manufactured at scale.

We are working with startup budget constraints, so I am looking for someone who can balance engineering performance with simplicity, manufacturability, development time and cost.

The engineering challenge

The product requires a structure that:

- Collapses into a compact configuration for storage and transportation.
- Expands into a stable, substantially rigid structure during use.
- Resists deformation under normal hand-grip pressure, including radial compression.
- Resists unintended axial collapse and twisting.
- Remains securely deployed until deliberately released or collapsed.
- Withstands repeated deployment and collapse cycles.
- Uses lightweight, durable materials suitable for consumer products.
- Is practical and cost-effective to manufacture at scale.

The key challenge is achieving both structural rigidity and controlled collapsibility without unnecessary mechanical complexity.

Scope of work

I would like the engineer to:

- Review the engineering problem and identify the key technical constraints.
- Investigate and compare multiple practical engineering solutions, including existing mechanisms and proven design principles that could be adapted.
- Assess competing approaches against structural rigidity, stability, compactness, durability, cost and manufacturing feasibility.
- Recommend the most promising solutions, supported by clear engineering reasoning.
- Develop preliminary sketches or CAD concepts illustrating how the shortlisted mechanisms would operate.
- Propose a cost-conscious prototyping and testing plan to validate the preferred solution.

I am open to different engineering approaches and particularly value engineers who can challenge assumptions and identify simpler alternatives.

Commercial and practical approach

As an early-stage startup, I am looking for an engineer who:

- Prioritises practical solutions over technical novelty for its own sake.
- Can leverage existing mechanisms, materials and manufacturing techniques rather than reinventing everything.
- Understands the importance of minimising part count, tooling complexity and assembly costs.
- Can identify the quickest and most economical way to test whether a concept works.
- Recognises when an approach is unnecessarily complex, expensive or commercially impractical.
- Can work collaboratively through clearly defined, budget-conscious development milestones.

The goal is not to conduct extensive theoretical research. It is to solve a specific engineering problem and move efficiently towards a commercially viable product.

Ideal candidate

Experience in one or more of the following:
- Mechanical mechanism design and kinematics.
- Collapsible, deployable or foldable structures.
- Origami-inspired engineering, bistable mechanisms or compliant mechanisms.
- Thin-walled plastic structures and structural reinforcement.
- Mechanical locking and stabilisation systems.
- Polymer engineering, injection moulding and design for manufacture.
- Functional prototyping, mechanical testing and structural analysis.
- Experience taking consumer products from concept to physical prototype and manufacturing is highly desirable.
- Strong written and spoken English is required for this project.

Initial deliverables

For the first phase:

- Technical assessment of the problem and constraints.
- Comparison of viable engineering solutions, including advantages, disadvantages, risks and indicative complexity.
- Preliminary sketches or CAD models of the most promising concepts.
- Recommended engineering direction with clear justification.
- Proposed next steps for economical prototyping and validation.

This will be a phased engagement, beginning with a focused, paid feasibility assessment before committing to further design development.

When applying, please include

- Examples of relevant mechanical engineering projects, preferably commercial products.
- A brief description of how you would approach solving this problem.
- Experience with prototyping, manufacturing and cost optimisation.
- Your proposed scope, timeline and fee for an initial feasibility assessment.

Confidentiality: Further product details and the full engineering brief will be shared with shortlisted candidates under an NDA.

There is potential for an ongoing engagement through prototyping, detailed design and manufacturing preparation if the initial phase is successful. read less
Project type: Mechanical engineering, mechanism design, feasibility assessment and prototyping

Project description

I am the founder of an early-stage consumer product startup developing an innovative portable product that requires a compact, collapsible structure capable of becoming substantially rigid and stable when deployed.

I am looking for an experienced mechanical design engineer to... read more
Project type: Mechanical engineering, mechanism design, feasibility assessment and prototyping

Project description

I am the founder of an early-stage consumer product startup developing an innovative portable product that requires a compact, collapsible structure capable of becoming substantially rigid and stable when deployed.

I am looking for an experienced mechanical design engineer to investigate, compare and recommend technically feasible solutions to this challenge.

This is a commercial startup project, not an academic research or open-ended R&D exercise. The objective is to identify a practical, cost-effective engineering solution that can be prototyped, validated and ultimately manufactured at scale.

We are working with startup budget constraints, so I am looking for someone who can balance engineering performance with simplicity, manufacturability, development time and cost.

The engineering challenge

The product requires a structure that:

- Collapses into a compact configuration for storage and transportation.
- Expands into a stable, substantially rigid structure during use.
- Resists deformation under normal hand-grip pressure, including radial compression.
- Resists unintended axial collapse and twisting.
- Remains securely deployed until deliberately released or collapsed.
- Withstands repeated deployment and collapse cycles.
- Uses lightweight, durable materials suitable for consumer products.
- Is practical and cost-effective to manufacture at scale.

The key challenge is achieving both structural rigidity and controlled collapsibility without unnecessary mechanical complexity.

Scope of work

I would like the engineer to:

- Review the engineering problem and identify the key technical constraints.
- Investigate and compare multiple practical engineering solutions, including existing mechanisms and proven design principles that could be adapted.
- Assess competing approaches against structural rigidity, stability, compactness, durability, cost and manufacturing feasibility.
- Recommend the most promising solutions, supported by clear engineering reasoning.
- Develop preliminary sketches or CAD concepts illustrating how the shortlisted mechanisms would operate.
- Propose a cost-conscious prototyping and testing plan to validate the preferred solution.

I am open to different engineering approaches and particularly value engineers who can challenge assumptions and identify simpler alternatives.

Commercial and practical approach

As an early-stage startup, I am looking for an engineer who:

- Prioritises practical solutions over technical novelty for its own sake.
- Can leverage existing mechanisms, materials and manufacturing techniques rather than reinventing everything.
- Understands the importance of minimising part count, tooling complexity and assembly costs.
- Can identify the quickest and most economical way to test whether a concept works.
- Recognises when an approach is unnecessarily complex, expensive or commercially impractical.
- Can work collaboratively through clearly defined, budget-conscious development milestones.

The goal is not to conduct extensive theoretical research. It is to solve a specific engineering problem and move efficiently towards a commercially viable product.

Ideal candidate

Experience in one or more of the following:
- Mechanical mechanism design and kinematics.
- Collapsible, deployable or foldable structures.
- Origami-inspired engineering, bistable mechanisms or compliant mechanisms.
- Thin-walled plastic structures and structural reinforcement.
- Mechanical locking and stabilisation systems.
- Polymer engineering, injection moulding and design for manufacture.
- Functional prototyping, mechanical testing and structural analysis.
- Experience taking consumer products from concept to physical prototype and manufacturing is highly desirable.
- Strong written and spoken English is required for this project.

Initial deliverables

For the first phase:

- Technical assessment of the problem and constraints.
- Comparison of viable engineering solutions, including advantages, disadvantages, risks and indicative complexity.
- Preliminary sketches or CAD models of the most promising concepts.
- Recommended engineering direction with clear justification.
- Proposed next steps for economical prototyping and validation.

This will be a phased engagement, beginning with a focused, paid feasibility assessment before committing to further design development.

When applying, please include

- Examples of relevant mechanical engineering projects, preferably commercial products.
- A brief description of how you would approach solving this problem.
- Experience with prototyping, manufacturing and cost optimisation.
- Your proposed scope, timeline and fee for an initial feasibility assessment.

Confidentiality: Further product details and the full engineering brief will be shared with shortlisted candidates under an NDA.

There is potential for an ongoing engagement through prototyping, detailed design and manufacturing preparation if the initial phase is successful. read less

Things to know

Job location

Remote

Work location

Job skill level

Any

Skill Level

Job rate

$8 - $100/hr

Hourly (USD)

Job type

Part-time

Job type

Job length

1-3 months

Job duration

Areas of expertise

Design for Manufacturing Finite Element Analysis Mechanical Engineering Mechanism Design Product Development +2 more

Job categories

Mechanical Design Services Product Engineering Services Engineering Design

About the client

Payment ready

Singapore (09:30 pm)

Posted

Active

Job activity

17 Applicants

0 interviews in progress

1 unanswered invites

More open jobs from this client (1)

Prototype Engineer – Consumer Product | Mechanical Design, Lid & Locking Mechanism

Remote - Posted
The goal is to develop a functional prototype that validates the product's form, usability and key mechanical systems — particularly the lid, hinge, locking mechanism and leak...
Mechanical CAD Design Injection Molding Design Engineering Design Manufacturing Drawings
View job

Similar jobs

Prototype Exercise Equipment Blueprint/CAD Program and Questions

Mckinney, United States - Posted
Hello, I'm looking for someone to help me come up with the design of a protype for a piece of workout equipment. I put and ai image of roughly what I'm looking for (will discu...
Exercise Equipment Design Product Engineering Services Mechanical Design Services Prototype Design Services
View job

Custom Long-Stem Rose Lighter

Remote - Posted
Project: Custom Long-Stem Rose Lighter — Industrial Design Hello! I’m developing a luxury, rose-shaped collectible lighter for my brand, Flame, and I’m looking for an exp...
Industrial Design Services Product Engineering Services 3D Design Services
View job

Oscillating power tool saw blade

Remote - Posted
I am looking to produce a prototype of a steel saw blade. The material will need to be thin sheet metal, laser cut to very specific geometry + metal bending. I need help modif...
Sheet Metal Design Prototype Design Services Mechanical Design Services
View job

7 inch ESP Packer Design

Remote - Posted
We are an oilfield completion tools manufacturer looking for an experienced packer design engineer to develop a 7-inch dual-zone injection packer with two cable feed-throughs....
SolidWorks Engineering Services Prototype Design Engineering Oil & Gas Engineering Design
View job

RTM Simulation Using Moldex3D

Remote - Posted
Part 1 Using Moldex 3D, simulate the Resin Transfer Molding (RTM) process for the prepared solid mesh and ply orientation (attached mfe and kpt files). Review the instructi...
3D Modeling Engineering Design Mechanical Design Services Product Engineering Services Mold and Die Design Services
View job

Hydrolic piston

Canada - Posted
Looking for experienced design engineer for quote looking for patent also and to assume functionality
3D Modeling Part-to-CAD Modeling Mechanical Design Services Machine Design Mechanical Engineering
View job

How it works

Find hourly jobs

Find hourly jobs

Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs

Fixed-rate jobs

Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests

Design contests

Experts build a reputation and earn prizes by participating in design challenges.

About Cad Crowd

4.9/5.0

(Our client satisfaction)

G2 2022

Spring high performer

223,616

global members

33,595

projects delivered to clients


Trusted by
US Army Corps of Engineers
Tiffany
BCG
Target
KPMG
Xprize

Find freelance & remote jobs

Your next big opportunity is just a click away. Create a free profile and start finding work tailored to your skills.