Hire the best freelance Structural Concrete Design expert designers for your company

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industri... Read more

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industries for over 9 years with design experience of various facilities including: tank batteries, CVR systems, well testing systems, gas plants, water plants, dehydration plants, pump stations, equipment skids and pipe lines to name a few. My responsibilities have included, but have not been limited to, piping design, structural design, onsite as-built verification, 3D Laser Scanning, drawing production, and construction support. I’m proficient in multiple 2D and 3D softwares such as, AutoCAD, AutoCAD Plant 3D, CADWorx, Solidworks, and Aveva’s PDMS.

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

Structural Detalier and Drafting Consultant with experience In Both US Structural Projects, Middle East Projects and Indian Projects . CAD Drafting is my my full time job, so with me your projects wi... Read more

Structural Detalier and Drafting Consultant with experience In Both US Structural Projects, Middle East Projects and Indian Projects . CAD Drafting is my my full time job, so with me your projects will get the attention it deserves, to get the job done accurately and in a timely manner. With my background, I’m very capable of delivering accurate, high quality CAD drawings and 3D models. My knowledge and proven abilities ensures that I can hit the ground running on projects..

1.I can produce construction drawing for structure(building frame,underground water retaining,retaining wall,pavement) of any shape and size either with reinforced concrete or steel including foundati... Read more

1.I can produce construction drawing for structure(building frame,underground water retaining,retaining wall,pavement) of any shape and size either with reinforced concrete or steel including foundation and superstructure for static and moving load. 2. SPT geotechnical investigation report. 3.Soil classification report

An engineering technologist with more than 6yrs of experience in drawing complete Building Plans (Architectural, Structural, Sanitary, Electrical and Mechanical) using AutoCAD. I have done various of... Read more

An engineering technologist with more than 6yrs of experience in drawing complete Building Plans (Architectural, Structural, Sanitary, Electrical and Mechanical) using AutoCAD. I have done various of projects ranging from a 2 storey residence to a 5 storey office building. I work efficiently and always meets deadlines.

Experienced and Dynamic Structural Engineer with a proven track record of ensuring that structures are architecturally safe and compliant with codes. Experienced in providing services for both residen... Read more

Experienced and Dynamic Structural Engineer with a proven track record of ensuring that structures are architecturally safe and compliant with codes. Experienced in providing services for both residential and commercial projects. Experience in work: RCC and Steel analysis and design. Design of Street light pole, Traffic gantries, Sign board, billboard of steel and aluminium. Civil and Structure Detailing work. BOQ's and BBS of structure with detailed estimnation. Drafting of Architecture, structure and MEP work. Solving academic questions related to Civil engineering like, SFD BMD, Theory of Structure, mechanics. Have knowledge of different Software like ETABS, Autocad, Staad pro, Prokon, Idea statica, Sap2000 ,Revit, 3dmax Worked on Steel poles, Traffic Signal, Sign board as per EN 40 and AASHTHO LRDF standards. Have Knowledge of American, British and Indian standards. Code Experienced: IS 456, 875, 1893, 801 etc. ACI 318, ASCE, AISC[removed], AISC 341 BS 5950/8110, EC2 and EN 40

Civil Engineer familiar with various structural design and analysis programs. I always look forward to working on major projects and scientific development in my field of study.

Civil Engineer familiar with various structural design and analysis programs. I always look forward to working on major projects and scientific development in my field of study.

Passionate and design-savvy engineer coming with the ability to make use of specialized computer software in analyzing and solving structural design complexities. Provided structural evaluations for 1... Read more

Passionate and design-savvy engineer coming with the ability to make use of specialized computer software in analyzing and solving structural design complexities. Provided structural evaluations for 150+ projects with a track record of ensuring that structures are architecturally safe & compliant with codes. • Performed full analysis and concept design of structural systems for all types of buildings and materials. • Prepared design criteria and calculation using several design softwares and excel sheets in accordance to the design codes and standards. • Prepared clear, complete & accurate design drawings, shop drawings and quantity survey. • Developed BIM models from 2D drawings. • Developed and tested models of alternate designs and processing methods to assess feasibility, operating condition effects, possible new applications and necessity of modification. • Coordinated with clients, architects, engineers, contractors and sub-consultants. • Visited project sites during construction to monitor progress and consult with contractors and on-site engineers. • Monitored social media and online sources for industry trends. SOFTWARES: • AutoCAD: excellent • CSI ETABS: excellent • CSI SAFE: excellent • SAP 2000: very good • MS Office: very good • Revit: very good • ROBOT: very good • Prokon: excellent • C++ language: good TECHNICAL SKILLS: • Structural analysis • 2D and 3D modeling • Proficiency in concrete construction • Design computations • Effective communication • Problem Resolution • Critical thinking and non-destructive evaluation • Ability to adapt and learn how to use new softwares • In-depth knowledge of ACI code, IBC, ASCE-7 and ASTM

Inventive, rigorous and passionate about my work, my asset is my mastery of 2D and 3D CAD software. Able to work as a team, with experience in both the construction and civil works (Design and calcula... Read more

Inventive, rigorous and passionate about my work, my asset is my mastery of 2D and 3D CAD software. Able to work as a team, with experience in both the construction and civil works (Design and calculation of concrete structures).

have experience in designing and executing entire projects including school, hospital, residences, renovation, small scale factory, apartment etc.

have experience in designing and executing entire projects including school, hospital, residences, renovation, small scale factory, apartment etc.

Currently, I specialize in structural design and construction, I’ve amassed over 3 years of experience in structural design and project management. I’m passionate about translating project visions and... Read more

Currently, I specialize in structural design and construction, I’ve amassed over 3 years of experience in structural design and project management. I’m passionate about translating project visions and objectives into reality, offering tangible results in line with clients’ expectations. My recent achievements include: • Executed and delivered Kes. 20 million wastewater sewer line project, involving the construction of a 430m sewer line in Nairobi. • Elected president of the Rotaract Club of Nairobi Parklands. Eager to secure roles that demand the use of the skills gained during my studies and work experiences. I love to connect with people from all walks of life and build new relationships. Feel free to send me a message. Would love to hear about potential career opportunities, so I would be pleased to chat about job openings in the structural engineering sphere. My key skills include; structural engineering, project management, structural design and analysis, project delivery, civil engineering, and leadership.

I am a structural engineer (MSc, BEng) with over 7 years experience working in Poland and simultaneously in the UK (6 years in London). During my career I was involved in wide range of projects, inclu... Read more

I am a structural engineer (MSc, BEng) with over 7 years experience working in Poland and simultaneously in the UK (6 years in London). During my career I was involved in wide range of projects, including: - King's Cross S1, S2 - commercial office buildings - I worked on this project from stage 1 to stage 5 including site visits, vibration analysis, foundation design, concept design for all the cantilevers, design of all concrete elements and checking detailing drawings https://www.kingscross.co.uk/s2-handyside - 220 High Holborn Street - extension of office building in Canary Wharf - stage 3 design - Oaks Park High School and Redbridge School - stage 4 design - Orange Office Park - concept design for an office building http://orangeofficepark.pl/en - multiple houses design (about 30 - 35) from small 100 sqr meter houses to mansions (400 sqr meters) and blocks of flats (up to 3 storeys) (all in Poland) - Cardiac Centre Building in Nowy Sącz, Poland - Arlanda Airport, Stockholm - stage 1 and stage 2 design of the new terminal - Church bulding in Poland- stage 1 to 3 (stll ongoing) - Sports Hall (adjecent to school building) in Nowy Sącz, Poland etc

Cálculos Estructurales. Ingeniería Básica y de Detalle en diversos proyectos. Gerente Técnico para las compañías Grupo SIIO C.A., Elite C.A. y Timber C.A. SAP 2000, AutoCad 2D y 3D

Cálculos Estructurales. Ingeniería Básica y de Detalle en diversos proyectos. Gerente Técnico para las compañías Grupo SIIO C.A., Elite C.A. y Timber C.A. SAP 2000, AutoCad 2D y 3D

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering:... Read more

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering: With a solid foundation in structural analysis and design, roads and highways design, traffic and transportation studies and project management, I bring experience and noteworthy achievements to the table. 📈 Data Science: I leverage data-driven insights to enhance decision-making, excelling in data analysis, machine learning, and predictive modeling, ensuring well-informed choices. 🛠️ Data Engineering: I'm proficient in constructing data pipelines, integrating datasets, maintaining databases, and implementing Big Data solutions for scalable, robust solutions. Why Choose Me? My analytical approach and interdisciplinary expertise empower me to tackle engineering and data-related challenges with precision and creative solutions. I manage projects with excellence and maintain open communication for your peace of mind. If you're seeking a professional who can provide structural engineering insights and leverage data for informed decisions, I'm here to collaborate. Let's work together to elevate your projects and drive innovation. Feel free to reach out to discuss your project or inquire about my services. I'm excited to be part of your project success story.

As a high spirit civil engineer with Master's degree I have worked since 17 years ago in the field of design, supervising and implementation of steel and concrete structures as well as low rise and ta... Read more

As a high spirit civil engineer with Master's degree I have worked since 17 years ago in the field of design, supervising and implementation of steel and concrete structures as well as low rise and tall buldings and structures.

I am Structural Civil Engineer, experienced in BIM and CAD modeling, FEM Analysis, Seismic Analysis and Structural Design with strong background in Steel Structures.

I am Structural Civil Engineer, experienced in BIM and CAD modeling, FEM Analysis, Seismic Analysis and Structural Design with strong background in Steel Structures.

experience in Shop drawings - for Doors , Windows , Furniture , Ceiling etc. Experience in precast drawings , Interior design drawings Create accurate, detailed technical plans for lighting and ligh... Read more

experience in Shop drawings - for Doors , Windows , Furniture , Ceiling etc. Experience in precast drawings , Interior design drawings Create accurate, detailed technical plans for lighting and lighting controls using the adequate design programs to convert specifications and design information from engineers into shop drawings. Prepare comprehensive wiring diagrams for electrical equipment, residential and commercial buildings according to project objectives, as per managers information and specifications. Knowledge in CNC Machine CAD drawing flooring detailed layouts ceiling layouts interior detailing elevations Analyzing building specifications, codes, and sites. Creating technical drawings from architects' sketches and specifications. Prepares detailed shop drawings in scale or full size, from blueprints of FURNITURE DESIGNER, showing methods of construction and upholstering, and indicating sizes and kinds of material to be used. Using CAD software to create drawings that incorporate exact measurements, calculations, building codes, and other construction details. Printing CAD drawing schematics for use by architects, construction managers, and structural and maintenance engineers. Visiting construction sites to perform measurements and calculate dimensions as needed. Collaborating with architects and construction engineers to ensure adherence to building specifications and industry regulations. Well versed in drafting sectional detailing and architectural drawings in Aluminium and Glazing works.

Are you looking for a structure Engineer to work from the initial conceptual stage and feasibility study through to the detailed final design? Motivated structural engineer with a strong ability to l... Read more

Are you looking for a structure Engineer to work from the initial conceptual stage and feasibility study through to the detailed final design? Motivated structural engineer with a strong ability to learn and adapt, autonomous and having a team spirit. Proven ability to lead and work effectively in a team and in hands-on. Holding Bachelor of civil engineering. I have demonstrative experience in design offices and construction sites. Skilled in AutoCAD, ETABS, SAFE, S-concrete, Tekla tedds, statcon, revit, Robot and Primavera

- More than 11 years experience in Construction & Building Sector. - I have many Skills in Structural Design , Quantity Surveying & Drawing Drafting. - I have Good Knowledge in Residential , Commercia... Read more

- More than 11 years experience in Construction & Building Sector. - I have many Skills in Structural Design , Quantity Surveying & Drawing Drafting. - I have Good Knowledge in Residential , Commercial & Industrial Projects. - I Designed more than 40 Residential R.C Buildings (G+4). - I Designed 2 Commercial Buildings R.C (B+G+M+7). - I Designed 2 Industrial Steel Building (Warehouse)

Proficient in : Structural Analysis, Design, Redesign and review for Concrete Structures using ACI 318 Code . Strong ability Structural Design of Low-Rise Buildings . Preparation of Shop drawings for... Read more

Proficient in : Structural Analysis, Design, Redesign and review for Concrete Structures using ACI 318 Code . Strong ability Structural Design of Low-Rise Buildings . Preparation of Shop drawings for Concrete Structures. Strong ability in use of CSI Structural Design( SAP2000, ETAB,SAFE) Software. Strong ability in use PROKON Structural Analysis and Design . Strong ability in use SpColumn . Strong ability in use computers Drafting AutoCAD Software.

Multi talented and highly skilled BIM expert. Seeking high responsibility work and not scared of challenges

Multi talented and highly skilled BIM expert. Seeking high responsibility work and not scared of challenges

I am an experienced CAD draftsman specializing in Structural drawing for reinforced concrete objects using AutoCAD and ArchiCAD

I am an experienced CAD draftsman specializing in Structural drawing for reinforced concrete objects using AutoCAD and ArchiCAD

I am a results driven Structural Engineer with [Number] years of experience specializing in high-precision structural steel detailing, rebar drawing, and stability analysis. I have a proven track rec... Read more

I am a results driven Structural Engineer with [Number] years of experience specializing in high-precision structural steel detailing, rebar drawing, and stability analysis. I have a proven track record of delivering production-ready shop drawings for [Types of Buildings, e.g., high-rise residential, industrial warehouses] and complex [Types of Machinery]. My expertise includes: Steel Detailing: Columns, beams, trusses, and connection design using [Software, e.g., Tekla/Advance Steel]. Reinforcement (Rebar): Detailed placing drawings and accurate Bar Bending Schedules (BBS). Stability & Analysis: Rigorous load calculations and stability checks ensuring safety and service ability. I ensure every project is strictly compliant with international standards, including [Codes you know, e.g., AISC, Eurocode, or ACI], to guarantee seamless fabrication and site execution. My focus is on reducing material waste and improving constructability through precise design. Let’s discuss how my technical expertise can support your next project. Message me for a custom quote or project estimate.

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures a... Read more

Eng. Islam Saudi is a Structural Engineer with about 11 years of experience in design of projects including underground metro, water and wastewater plants,high rise buildings,repairing of structures and precast building. Eng. Islam gained great experience in the analysis and design of RC structures practicing various worldwide building codes including the ACI, BS Codes of Practice, Eurocode and Egyptian Code (ECP), Eng. Islam gained great experience in following programs - PLAXIS; Finite Element Code for Soil and Rock Analysis including the retaining structural elements. - SAP 2000; Structural Analysis Program. - SAFE; Slab Analysis by the Finite Element Method - ETABS; Extended 3D Analysis of Building systems - PROKON, PCA-COL - CONCISE BEAM, Analysis and design of precast prestressed elements (beams,HCS) - Microsoft office; MS Excel, MS Word, MS Power Point. - AutoCAD - Revite structure -Concise Beam

Preparation of technical and commercial proposal for projects based on received tender documents from Client. Develop cost-effective design layouts based on project Requirements within given assumptio... Read more

Preparation of technical and commercial proposal for projects based on received tender documents from Client. Develop cost-effective design layouts based on project Requirements within given assumptions and Constrains. Adhere to established design guidelines and procedures. Analyse design issues and recommend corrective actions. Perform civil design analysis and calculations according to project requirements for all cast in place and precast/ pre-stressed buildings (both commercial and residential) using Manual Calculations and latest recognised software and technologies such as STAAD Pro V8I, ETABS, SAP2000, SAFE, CONCISE BEAM, SP COLUMN. Determine construction cost and material estimates based on civil designs. Review of third party civil Design including base design and detail design (detailed drawings, design calculations and material technical specification) based on project technical specifications, pre-bid and post-bid clarifications.

General Arrangement Drawings Bridge Drawings: Steel, Concrete, and Timbre Culvert Drawings: Precast and Cast-in place Retain Walls Structural Building Framing Plans Building Foundation Plans Car Dea... Read more

General Arrangement Drawings Bridge Drawings: Steel, Concrete, and Timbre Culvert Drawings: Precast and Cast-in place Retain Walls Structural Building Framing Plans Building Foundation Plans Car Dealer Ships Libraries Condos Manufacturing Plants

I am a highly motivated individual with the desire to take new challenges .My key interpersonal and communication skills, a strong work ethic, adaptability and a high attention detail. I am passionate... Read more

I am a highly motivated individual with the desire to take new challenges .My key interpersonal and communication skills, a strong work ethic, adaptability and a high attention detail. I am passionate about architectural & structural design with a high interest on solving site issues.