Hire the best Storm and Sanitary Analysis experts for your company

I am a Senior Designer/Engineering Technician that runs a team in a successful consulting engineer firm. I am doing this on the side and am accepting any offers for jobs having to do with basic drafti... Read more

I am a Senior Designer/Engineering Technician that runs a team in a successful consulting engineer firm. I am doing this on the side and am accepting any offers for jobs having to do with basic drafting from a known concept or complex civil drawings. I have been using AutoCAD programs for 10+ years and I am more than proficient. I am used to working in a professional environment and being very organized with my work. I can assure you that you will receive quality work that you will be pleased with by the time I complete your project in a timely manner.

Experienced Civil 3D Draftsman & Civil Engineer With extensive experience in land development, roadway design, and site grading, I specialize in preparing permit drawings, cut & fill earthwork calcula... Read more

Experienced Civil 3D Draftsman & Civil Engineer With extensive experience in land development, roadway design, and site grading, I specialize in preparing permit drawings, cut & fill earthwork calculations, and SWPPP compliance. I have successfully worked on various infrastructure projects, including road striping, pavement restoration, and curb ramp installations across California. Proficient in AutoCAD Civil 3D, I create detailed grading plans, utility layouts, and construction drawings. My expertise extends to stormwater management, subdivision design, and site development planning. Additionally, I collaborate with MEP professionals to deliver complete engineering solutions. I am open to freelance collaborations on infrastructure and civil engineering projects. Let's connect and bring your project to life!

We are an engineering firm using the most advanced civil engineering software to provide the customer with the most economical design and the most affordable prices.

We are an engineering firm using the most advanced civil engineering software to provide the customer with the most economical design and the most affordable prices.

Specialist in the field of ( Drainage) I have more than ten years of experience in the field of Drainage( Hydrology and hydraulic ), and floodplain risk management and solutions I have perfect experi... Read more

Specialist in the field of ( Drainage) I have more than ten years of experience in the field of Drainage( Hydrology and hydraulic ), and floodplain risk management and solutions I have perfect experience in integration between drainage design software and GIS software, which gives the ability to reduce design process time up to 40% compared with " traditional design ways." I have been worked on different projects scales large and small-scale projects. Software 1.Hec-Ras 1D and 2D 2.Hec-Georas 3.StormCad 4.civil 3D 5.ArcGIS 6.SSA 7.Global Mapper 8.Sewer Cad

• I have experience more than 15+ years in Highway design, Transportation planning, management of highway projects. Geometric design of urban and rural highways, intersections and interchanges, by Civ... Read more

• I have experience more than 15+ years in Highway design, Transportation planning, management of highway projects. Geometric design of urban and rural highways, intersections and interchanges, by Civil 3D & 12d software’s in Geometric design and developing Plans & Profiles, Cross Sections, computing earthwork quantities. Pavement structural design by MPW-Kuwait, and ASSHTO methods Review and checking Traffic studies, with using HCM methods for capacity analysis, application of Synchro 8 , SimTraffic 8 and SIDRA softwares.

civil engineer with vast experiences in civil site design for residential and commercial land development projects in and out of the United State

civil engineer with vast experiences in civil site design for residential and commercial land development projects in and out of the United State

I'm a civil infrastructure engineer based in Indonesia that interested in road and drainage design, calculate the cut and fill volume and the supporting structure such as retaining wall, slope stabili... Read more

I'm a civil infrastructure engineer based in Indonesia that interested in road and drainage design, calculate the cut and fill volume and the supporting structure such as retaining wall, slope stability. I can use and operate some of engineering design utility such as AutoCAD (for drafting), AutoCAD Civil 3D (to design the road, grading plan, utility and caluclate the cut and fill volume), Autodesk Storm and Sanitary Analysis (to design the drainage system). I can provide the concept, detailed engineering design for the infrastructure related projects.

My field experience spans nearly 7 years, with a strong focus on the design and supervision of roads and dams. I have worked extensively on road construction projects, overseeing tasks like earthworks... Read more

My field experience spans nearly 7 years, with a strong focus on the design and supervision of roads and dams. I have worked extensively on road construction projects, overseeing tasks like earthworks, grading, and paving, while ensuring compliance with design specifications and safety standards. In dam projects, I have been involved in site preparation, embankment construction, and spillway design, applying critical thinking to solve challenges related to water flow management and structural integrity. I am proficient in budgeting, client relations, negotiation, and critical thinking, coupled with expertise in Microsoft Office Suite and water and wastewater design software like Autodesk Storm and Sanitary Analysis. Additionally, I aim to further explore advanced engineering concepts as part of your team, which I believe will help me become an even greater asset. My organizational skills and resourcefulness make me an effective leader and a quick learner, equipped to adapt to and manage field projects. These qualifications, along with my experience, make me a strong candidate for your team.

Design and drafting experience in Water and wastewater treatment plant Utilites network, pipeline, Potable water network, Sanitary sewear network, Storm water net work, Irrigation network, Fire figh... Read more

Design and drafting experience in Water and wastewater treatment plant Utilites network, pipeline, Potable water network, Sanitary sewear network, Storm water net work, Irrigation network, Fire fighting network, Stress Analysis, Pressure vessel ‘U’, Process Design and Detail engineering of water, STP, WTP, MBR and Desalination plant using ASME, API, AWWA, NFPA. Codes and standards.

I am an Environmental and Civil engineer with extensive experience in designing infrastructures, oriented in Roads and wet utilities. More specifically, i am specialized in: (a) terrain modeling usi... Read more

I am an Environmental and Civil engineer with extensive experience in designing infrastructures, oriented in Roads and wet utilities. More specifically, i am specialized in: (a) terrain modeling using Civil 3d package of Autodesk (survey point handling, surfaces, post development representations, drainage components - swales, channels, ponds etc) (b) drainage systems, watershed analysis, delineation of basins, design of gravity piping systems, hydraulic modeling (c) quantity surveying using Civil 3d (earthworks, piping systems etc) - QTO manager Tools: Autocad 2D & 3D, Autocad Civil 3d, Infraworks 360, Storm & Sanitary Analysis I have working experiences from projects in Greece and Saudi Arabia

Hello, I am Civil Engineering Technologist with seven (7) years of experience in the construction field as both an Inspector and Contract Administrator for Land Development, Municipal Infrastructur... Read more

Hello, I am Civil Engineering Technologist with seven (7) years of experience in the construction field as both an Inspector and Contract Administrator for Land Development, Municipal Infrastructure and Transportation projects and three (3) years of experience in the design of municipal infrastructure. Typical responsibilities include resident inspection and contract administration, coordination on multi-disciplinary infrastructure projects, hydrologic and hydraulic modelling, preparation of technical reports for design and construction, preparation of cost estimates, specifications, tender and contract documents as well as mentoring and supervising junior staff. • Proficient use of AutoCAD and AutoCAD Civil 3D for drafting & design of grading, water distribution systems, storm and sanitary sewer systems, quantities for earthworks volumes and roads. • Excellent use of Microsoft Office Suite programs such as Word, Excel, Access, Powerpoint, & Project. • Working Knowledge of various engineering software such as Visual OTTHYMO, HEC-RAS, H20Net, WaterCAD, Storm & Sanitary Analysis and InRoads. • Experienced in engineering & topographical survey utilizing GPS & Robotic Total Stations. • Thorough understanding of the Ontario Provincial Standards, Municipal Design Standards and Development Engineering Manuals, Tendering & Procurement Processes, Contract Administration & Inspection Tasks, Occupational Health & Safety Act for Construction Projects as well as other applicable codes, standards & legislation. • Excellent attention to detail, written & oral communication skills with proven analytical & negotiating skills. I'd like to thank you in advance for considering me and would welcome an opportunity to discuss more about your project, my skill set, and how I might contribute to your project's success. If you have any questions, feel free to contact me. Best Regards, Joshua Battiston, C.E.T., rcsi, LEED Green Assoc.

I am civil engineer with a great back ground in plumbing engineering, infrastructure and firefighting design fields, i have worked in several projects with INFRA Group Consultants, AMER group and Wadi... Read more

I am civil engineer with a great back ground in plumbing engineering, infrastructure and firefighting design fields, i have worked in several projects with INFRA Group Consultants, AMER group and Wadi Degla clubs in plumbing, water&sewer networks and firefighting designing projects. Using professional engineering software such as: AutoCad, Civil 3D, WaterGems, SewerGems, StormCad and Pipe2Cad

As a Senior Water Resources Engineer with more than 12 years of professional experience, I have led hydrologic and hydraulic modeling, stormwater management, drainage design, and flood risk assessment... Read more

As a Senior Water Resources Engineer with more than 12 years of professional experience, I have led hydrologic and hydraulic modeling, stormwater management, drainage design, and flood risk assessment projects for municipalities and infrastructure developments. My technical expertise includes HEC-RAS (1D/2D), HEC-HMS, EPA SWMM, XPSWMM, Autodesk Storm & Sanitary Analysis (SSA), ArcGIS, and GIS-based watershed analysis. My background aligns well with Current Hydro's focus on innovative, data-driven water resources solutions. I have developed flood inundation models, designed stormwater conveyance systems, performed culvert and open-channel hydraulic analyses, and prepared technical reports and engineering deliverables for complex projects. I am comfortable collaborating with multidisciplinary teams in fully remote environments and communicating technical findings clearly to engineers, project managers, and clients. Highlights of my qualifications include: • 12+ years of experience in hydrology and hydraulics. •Advanced modeling with HEC-RAS, HEC-HMS, SWMM, and SSA. • Expertise in stormwater management, floodplain analysis, drainage system design, and GIS. • Strong analytical, documentation, and problem-solving skills. • U.S. Lawful Permanent Resident (Green Card holder) with authorization to work in the United States. I am excited about the opportunity to contribute my technical expertise and practical experience to you. I would welcome the opportunity to discuss how my background can support your team and ongoing projects.

With eleven years of Project Management & Civil Engineering Design experience. I have gained a wide-ranging knowledge in designing engineered structures, including buildings, roads, parking lots, drai... Read more

With eleven years of Project Management & Civil Engineering Design experience. I have gained a wide-ranging knowledge in designing engineered structures, including buildings, roads, parking lots, drainage structures, utilities, and subdivision plats. I have been given the responsibility for a number of projects pertaining to educational, municipal, county and private industry. Throughout my professional career, I have been involved in the areas of project management and civil engineering designs.

We are a team of Professional Engineers & Architects with 15+ years of experience in Planning, designing, and drafting Commercial, Industrial, Residential, and infrastructure projects. Services inclu... Read more

We are a team of Professional Engineers & Architects with 15+ years of experience in Planning, designing, and drafting Commercial, Industrial, Residential, and infrastructure projects. Services include: 1. COMPLETE MEP SYSTEM DESIGN (Plumbing, Electrical & HVAC) HVAC • HVAC Detail Design Layout • Complete Equipment Selection based on load and Schedule. • Ductwork and Air Distribution Systems • Air Filtration and Purification Systems • Detailed Equipment Installation Details • Duct Sizing Calculation and Routing • Cooling and Heat Load Report • Ventilation Calculation Report • Split Units • Manual J, D, and S • VRF System Design • Chillers • Air Conditioners • Cooling Towers • Kitchen Hood Ventilation • Heat exchangers • Takeoff Sheets • Bills of Quantity • Technical Specification and more PLUMBING * Hot & Cold-Water Service * Detailed Drainage System * Stormwater service * Septic tank system * Sewerage, Irrigation System * Piping layouts * Natural gas supply and distribution services * Mechanical plant condensate waste * Sanitary Drainage System * Assist Architect with sizing of gutters and downpipes * Equipment installation detail * Swimming Pool Plumbing, Heating and Filtration System * BQQ and Takeoff sheets * Technical Specifications and more ELECTRICAL DESIGN • Lighting Layouts • Power Layouts • Single Line Diagram • Fire Alarm System • ELV (Subject to Client’s requirement) • Lighting Protection System • Design Calculations • Equipment Installation Detail Drawings. • Technical Specifications and more. 2. FIRE PROTECTION SYSTEM DESIGN • Fire Sprinkler Design Layout as per NFPA • Plumbing and Piping Expertise • Collaboration and Communication • Fire Hose Reel System • Pump Room Sizing and Fire pump room selection and detail • Equipment Schedule • Bills of quantity • Technical Specifications and more 3. CIVIL & STRUCTURE DESIGN • Foundation Plan • Beams and Columns • Detailed drawings (Footings) • Water Proofing •. Section Drawings • Notes, Legends, and more 4. ARCHITECTURAL DESIGN & DRAFTING • Setting out Plan/Site Plans • Interior Design • 2D Floor Plans • 3D Exterior • Roof Plans • Elevation Plans • Section Plans • Area Calculations • Wall sectional details • Door & Window Details • Deck Drawings • Shop Drawings • Blueprint (Package) • Drawings for City Permits and more.

I am a civil engineer specializing in water supply, sewerage, stormwater and utility infrastructure design. I work primarily in AutoCAD and have practical experience developing complete engineering dr... Read more

I am a civil engineer specializing in water supply, sewerage, stormwater and utility infrastructure design. I work primarily in AutoCAD and have practical experience developing complete engineering drawings for gravity and pressure pipeline systems, including plans, longitudinal profiles, hydraulic calculations, manholes, pumping stations and construction details. My services include: • Water supply and sewer network design • Stormwater and drainage systems • Gravity and pressure pipeline design • Hydraulic calculations and pipe sizing • AutoCAD drafting and technical drawings • PDF/sketch/image to accurate DWG conversion • Plans, profiles, sections and construction details • CAD drawing cleanup and modification I focus on technically correct, clear and practical drawings rather than drafting geometry without understanding the engineering behind it.

I am a First-Class Aerospace Engineering graduate with strong CAD and practical engineering design experience. My main CAD work has been through my Olympic Nacra 17 sailing campaign, where I design an... Read more

I am a First-Class Aerospace Engineering graduate with strong CAD and practical engineering design experience. My main CAD work has been through my Olympic Nacra 17 sailing campaign, where I design and prototype bespoke components for a high-performance foiling catamaran. I use Onshape as my primary CAD platform, with additional experience in SolidWorks, ANSYS and MATLAB. My work includes designing mechanical parts, 3D-printable components, fittings, mounts and prototype assemblies, with a focus on practical usability, strength, weight, material choice and manufacturability. I enjoy turning real-world problems into simple, functional designs and refining them through testing and feedback.

I ama master of mechanical engineering with experience using solidworks, mastercam, and mastercam software. I have strong design skills and have completed many design orders from 2019 to 2023. I also... Read more

I ama master of mechanical engineering with experience using solidworks, mastercam, and mastercam software. I have strong design skills and have completed many design orders from 2019 to 2023. I also have the ability to work independently and on the team, and to communicate well with clients and coworkers. Here are some of my strengths, skills, and accomplishments: Power: Have strong design skills Being able to work independently and in a team Able to communicate well with clients and colleagues Skills: Adept at solidworks, mastercam, and mastercam software Has extensive knowledge of mechanical engineering Be able to read and interpret the drawing techniques Achievements: Have completed many design orders from 2019 to 2023 Has received the "best designer of the year" award in 2022

I am an architect and I have long experience offline in construction and landscape feild .Also I have a good experiance in design all kind of building and Autocad drawing 2d and 3d. in addition to all... Read more

I am an architect and I have long experience offline in construction and landscape feild .Also I have a good experiance in design all kind of building and Autocad drawing 2d and 3d. in addition to all take off (quantity servaior works). I will help you to design, draw Or solve any architectural problem you are facing with creative ideas. Also help you to prevent any coordination problem during execution. All above and I have not bad experience about affiliate marketing, SEO and linkbuilding. My Skills: - Architectural design. - Building Design. - Landscape. - Autocad drawing. - Facade improvment. - Renovation projects. - Take off material ( Quantity Servayor -QS). - Word work - Excel work.

I have been working in the field of plastic injection molding and mold design for over 20 years and have been freelancing for another 4 years. It has been an interesting and challenging experience! My... Read more

I have been working in the field of plastic injection molding and mold design for over 20 years and have been freelancing for another 4 years. It has been an interesting and challenging experience! My main focus has been plastic injection molds, plastic components, tooling, fixtures and product development. I have done many product design projects in a variety of industries and look forward to having a discussion with you about your idea. Your project will be completed in a timely manner and with great attention to detail and functionality. I also can 3d print your product for evaluation and design review. less

A person who is dedicated to both parents, and sincerely work to find sustenance for the family. I am here in the learning phase and share experiences and knowledge that can benefit others. I really l... Read more

A person who is dedicated to both parents, and sincerely work to find sustenance for the family. I am here in the learning phase and share experiences and knowledge that can benefit others. I really like anything related to the project, from the start of the design process => calculation of bill of quantity => making a schedule of plans => and the stages of the process until the completion. At work I have the motto "Everyday is Monday.

Rayvat Engineering ( Estd. 2007) is a 3D Architectural Visualization Studio providing solutions across Architectural 3D Visualization, Architectural Animation, and CAD Drafting & Modeling. From simple... Read more

Rayvat Engineering ( Estd. 2007) is a 3D Architectural Visualization Studio providing solutions across Architectural 3D Visualization, Architectural Animation, and CAD Drafting & Modeling. From simple Paper to CAD conversion to 3D Rendering, 360 ° Virtual Reality(VR) and Walkthroughs, we cover the entire spectrum of Architectural 3D Rendering and CAD Outsourcing needs. We primarily serve our esteemed clientele based out of geographies like USA, Canada, UAE, Australia, Germany, Spain, and other European countries. Our expertise extends across domains like Urban Design and Interior Design, Academic Buildings, Civic Projects, Residential and Integrated Housing Townships.

Making industrial parts three-dimensional. Rendering - two-dimensional drawing. Converting STL Catia to solid

Making industrial parts three-dimensional. Rendering - two-dimensional drawing. Converting STL Catia to solid

Hi! I am an architect and 3d visualizer with over 7 years experience in 3d modeling and rendering. I have worked for several European architecture firms, currently working within an architecture stud... Read more

Hi! I am an architect and 3d visualizer with over 7 years experience in 3d modeling and rendering. I have worked for several European architecture firms, currently working within an architecture studio. My skills have been proved on various architecture contests always willing to challenge my abilities trough interesting and high demanding projects. I am proficient with: - 3DStudioMax - Archicad/Autocad - Sketchup - Adobe Photoshop/AfterEffects.

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and con... Read more

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and consumer products (water bottles, utensils, etc.). I take design and product requests, and will do my absolute best to ensure the client's needs are met! I look forward to working with you!

Hi, I’m Aleksandar, the founder of AB Precision. I specialize in high-quality 2D CAD drafting, with a focus on architectural floor plans and detailed shop drawings. Whether you need a precise layout f... Read more

Hi, I’m Aleksandar, the founder of AB Precision. I specialize in high-quality 2D CAD drafting, with a focus on architectural floor plans and detailed shop drawings. Whether you need a precise layout for a residential space or complex technical details for marble and furniture fabrication (like fireplaces and custom stone work), I’ve got you covered. My goal is to provide construction-ready documents that bridge the gap between design and reality. Let’s bring your project to life with precision and clarity!

My focus centers around creating concepts and preparing 3d designs for digital prototyping, analysis, documentation, marketing and manufacturing. I use a mixture of direct cad modeling and polygonal m... Read more

My focus centers around creating concepts and preparing 3d designs for digital prototyping, analysis, documentation, marketing and manufacturing. I use a mixture of direct cad modeling and polygonal modeling software which enables me to easily create complex geometry data that can be used for production or manufacturing.