Hire the best SolidWorks PCB experts for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

Hello, I am a senior hardware engineer with over 10 years of experience in the entire product lifecycle development of electronic products, covering all aspects from initial product design and PCB dev... Read more

Hello, I am a senior hardware engineer with over 10 years of experience in the entire product lifecycle development of electronic products, covering all aspects from initial product design and PCB development to component procurement, mass production, and solution cost optimization. I am dedicated to bridging the gap between hardware engineering and supply chain management, helping global customers, hardware startups, and EMS companies bring reliable products to market while addressing component shortages and reducing overall bill of materials (BOM) costs. 🔧 Core Expertise and Skills • Hardware and Product Design: Embedded circuit design, schematic drawing, and system architecture optimization. • PCB Development: Multi-layer PCB layout, signal integrity, and design for manufacturing/assembly (DFM/DFA). • Procurement and Supply Chain: Strategic component sourcing, identification of discontinued/obsolete components, and supplier management. • Mass Production Support: New Product Introduction (NPI), test fixture design, and production line troubleshooting. • Solution Cost Optimization: Pin-to-pin IC cross-referencing (e.g., STM32 vs. GD32, TI/ADI vs. 3PEAK) saves 20%–40% of total BOM cost without impacting performance. 🏆 Key Achievements and Impact • Resolving End-of-Lifecycle and Stockout Issues: Successfully found direct domestic alternatives for critical MCUs and high-precision operational amplifiers for US/EU customers, avoiding months of redesign delays. • Cost Reduction: Optimized complex BOMs for commercial and industrial products, reducing component costs by up to 35%. • Smooth Production: Guided multiple hardware projects from prototyping to mass production, achieving zero field failures. 🎓 Education Background • Expert in Electronic/Electrical Engineering (or related fields) • In-depth understanding of the Asian and global semiconductor supply chains. Whether you need a complete PCB redesign, assistance with mass production, or urgent search for alternative ICs to circumvent supply chain bottlenecks, I can help. Please send us your project details or bill of materials immediately so we can conduct a rapid technical assessment!

Embedded System Designer Innovative and detail-oriented Embedded System Designer with expertise in developing hardware–software integrated solutions for real-time, resource-constrained environments. S... Read more

Embedded System Designer Innovative and detail-oriented Embedded System Designer with expertise in developing hardware–software integrated solutions for real-time, resource-constrained environments. Skilled in designing microcontroller- and microprocessor-based systems, optimizing firmware for performance and reliability, and implementing secure, scalable embedded architectures. Proficient in C, C++, and Python, with deep knowledge of electronics, signal processing, and communication protocols (I2C, SPI, UART, CAN, Bluetooth, Wi-Fi). Experienced in using RTOS platforms, hardware debugging tools, and PCB design software to create robust embedded products. Adept at collaborating with cross-functional teams to deliver efficient, cost-effective, and industry-compliant solutions for automotive, IoT, medical, and industrial applications. Mechanical Design Engineer Highly skilled Mechanical Design Engineer specializing in the conceptualization, design, and optimization of mechanical systems, machinery, and components. Proficient in 3D CAD modeling (SolidWorks, AutoCAD, CATIA, Creo), FEA analysis, and prototyping, with a strong foundation in materials science, thermodynamics, and manufacturing processes. Experienced in designing both standard and custom machinery, ensuring compliance with safety, quality, and performance standards. Adept at integrating mechanical designs with electrical and control systems for automation projects. Proven ability to work in multidisciplinary teams, manage design cycles from concept to production, and deliver innovative, cost-efficient mechanical solutions for industrial, automotive, robotics, and consumer product applications.

Just so you don't have to read another Ai Slob. I have a 10 years working experience in Mechanical Engineering and Structural Engineering. I head a company of 11 people in this niche. I am Great at w... Read more

Just so you don't have to read another Ai Slob. I have a 10 years working experience in Mechanical Engineering and Structural Engineering. I head a company of 11 people in this niche. I am Great at what I do. Thank you

hello my name is Borhen MLIK I'm expert solidworks and I wanna share my soft skills, I work technical manager and trainer solidworks, I have many experience in many fields. thank you to trust me cordi... Read more

hello my name is Borhen MLIK I'm expert solidworks and I wanna share my soft skills, I work technical manager and trainer solidworks, I have many experience in many fields. thank you to trust me cordially

-Strengths *Sheet Metal *Manufacturing Drawings *HVAC-R Explosion Rated Equipment *SoildWorks (PCB editor, PDM, Electrical, Flow Simulation, Routing, 2d drawings, 3d mode... Read more

-Strengths *Sheet Metal *Manufacturing Drawings *HVAC-R Explosion Rated Equipment *SoildWorks (PCB editor, PDM, Electrical, Flow Simulation, Routing, 2d drawings, 3d models) -Projects. *Patent Drawings *ASME, ANSI, ISO, UL, NEMA encountered these standards *Mil-Spec Rated Equipment *Exotic Metals *Corrasion Resistances *3d Animation of packaged AC for a commercial -Accomplishments *Bachelor's of Science in Mechanical Engineering *CEO of L&L Drafting and Design *Louisiana Tech University Alumni

Hi, I am an Electrical Designer, Electronic Designer and Industrial Automation Specialist

Hi, I am an Electrical Designer, Electronic Designer and Industrial Automation Specialist

Colin is a highly motivated Electrical Engineer with a passion for PCB design. He is an experienced designer having used Solidworks PCB, Altium PCB, Spice and other programs on a variety of projects.... Read more

Colin is a highly motivated Electrical Engineer with a passion for PCB design. He is an experienced designer having used Solidworks PCB, Altium PCB, Spice and other programs on a variety of projects. Notably these include an integrated GNSS receiver, a 12 Volt Battery Monitoring system and portable AIS transponder.

I have more than 16 years of PCB layout experience and my tool expertise in Cadence Allegro and Altium Designer. I can do the following things. High speed PCB layout RF PCB layout Analog and Digital l... Read more

I have more than 16 years of PCB layout experience and my tool expertise in Cadence Allegro and Altium Designer. I can do the following things. High speed PCB layout RF PCB layout Analog and Digital layout High Current/Voltage Pcb Footprint creation Schematic symbol creation Schematic Drafting DFM Analysis Stackup calculation

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed e... Read more

Design engineer with proven abilities to create innovative solutions. Diverse and progressive international experience in new product development and machine design. Designed, built and installed electro-mechanical products, machinery and systems for a wide variety of industries. Generated winning proposals and developed customer relationships. Innovative conceptual designer. Inventor of patented industrial machinery products. Solid track record leading profitable new product development. Registered Professional Engineer. Specialties: Machine designer with proven abilities to drive innovative new product development

I help product teams turn concepts into production-ready designs from mechanical parts and assemblies to custom PCBs and working prototypes. My work spans both sides of product development: mechanica... Read more

I help product teams turn concepts into production-ready designs from mechanical parts and assemblies to custom PCBs and working prototypes. My work spans both sides of product development: mechanical design and embedded hardware. That means I can design the enclosure, the internal assembly, and the control board that makes it function—without you needing to coordinate multiple freelancers. What I deliver: Mechanical Design (SolidWorks): Production-ready parts, assemblies, and manufacturing drawings. Design for Manufacturing (DFM) analysis, tolerance considerations, and assembly documentation . PCB Design (KiCad): Schematic capture, multi-layer layout, Gerber files ready for JLCPCB or your preferred fabrication house, and complete Bill of Materials. 3D Printing & Prototyping: Design for additive manufacturing, topology optimization considerations, and STL/STEP file preparation for printing . End-to-End Ownership: I don't hand off half-finished work. Every design is checked thoroughly before submission, and every deliverable includes documentation you can hand to a manufacturer. Tech stack: SolidWorks, KiCad, 3D printing workflows, ESP32/STM32 integration. If you have a product concept that needs mechanical design, a control board, or both, send me a message with your requirements. I'll tell you honestly whether I'm the right fit.

We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of... Read more

We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical(3D print, CNC and molds). Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, Flash, DDRx, PCIEx, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more.

I am an Electrical & Electronics Engineer with hands-on experience in PCB design, AutoCAD electrical layouts, SolidWorks 3D modeling, and MATLAB/Simulink simulation. Over the past few years, I have wo... Read more

I am an Electrical & Electronics Engineer with hands-on experience in PCB design, AutoCAD electrical layouts, SolidWorks 3D modeling, and MATLAB/Simulink simulation. Over the past few years, I have worked on diverse academic and industrial projects, including PCB prototyping, panel/conduit electrical designs, renewable hybrid power system modeling, and UAV automation research. I provide: - PCB design and fabrication-ready layouts (Proteus, Multisim, or client-preferred software). - AutoCAD 2D electrical drawings and conduit/civil layouts. - SolidWorks 3D modeling for product enclosures, parts, and assemblies. - MATLAB/Simulink simulations for control systems, renewable energy, and robotics. - Technical documentation, schematics, and design reports. I focus on accuracy, timely delivery, and clear communication to ensure every project meets both technical standards and client expectations. I am looking for remote part-time opportunities to support startups, engineers, and researchers worldwide.

Mechanical engineering specializing in Productique & Énergétique, with hands-on experience in 3D CAD modeling (SolidWorks, CATIA), FEA simulation (ANSYS), and embedded systems design (Arduino, ESP32).... Read more

Mechanical engineering specializing in Productique & Énergétique, with hands-on experience in 3D CAD modeling (SolidWorks, CATIA), FEA simulation (ANSYS), and embedded systems design (Arduino, ESP32). I combine mechanical design with electronics and control systems, from motorized assemblies to microcontroller-based control loops. to deliver complete, functional prototypes rather than just drawings. Currently completing an industrial engineering internship at OCP Group.

echatronics Engineering student (8th semester) at Universidad Católica Boliviana "San Pablo," Bolivia, with hands-on experience in mechanical design and prototype development for university research p... Read more

echatronics Engineering student (8th semester) at Universidad Católica Boliviana "San Pablo," Bolivia, with hands-on experience in mechanical design and prototype development for university research projects. Recently designed and produced technical drawings for both a laboratory-scale and an industrial-scale pyrolysis reactor, as part of a research project on energy valorization of Amazonian fruit residues. Used SolidWorks for 3D modeling and assembly, and Finite Element Analysis (FEA) to validate structural designs. Additional technical skills include: - PCB design and embedded systems development - C++ and Python programming - Computer vision - Power electronics - Residential electrical installations and troubleshooting I'm reliable, detail-oriented, and committed to delivering accurate, well-documented technical work. Looking forward to contributing my skills to engineering and design projects.

PCB Design Engineer with 7 years of hands-on experience in analog and digital hardware design at the circuit board level. Also, have a strong mechanical aptitude and have worked in a machine shop envi... Read more

PCB Design Engineer with 7 years of hands-on experience in analog and digital hardware design at the circuit board level. Also, have a strong mechanical aptitude and have worked in a machine shop environment and well as a mechanical engineer. I like to peruse a career, which utilizes both my electronics mechanical abilities. - Core Skills - • Experience in PCB Designing, Library Development, Schematic capture using Altium/ Siemens Xpedition/Cadence Allegro/Zuken CR-8000/PADS and able to learn new tool on requirement • Experience in High-Speed digital design and low noise PCB design • Experience with any 3D Solid Modeling Software (SolidWorks/AutoCAD/SolidWorks Electrical) • Firmware development of MCU(PIC, STM32, ATMEGA)

I design enclosures for electronics. Not gaming cases. Not generic boxes. Clean, slim, real products. I use Solidworks every day. I do surface modeling for the outside shape and solid modeling for ins... Read more

I design enclosures for electronics. Not gaming cases. Not generic boxes. Clean, slim, real products. I use Solidworks every day. I do surface modeling for the outside shape and solid modeling for inside parts. I know how to design for CNC and bent aluminum. I don't add extra space for no reason. Every millimeter matters. I place mounts so they line up and make sense. What I've done: Custom PC enclosures – made them slimmer, cleaned up vents, added recessed buttons Small electronics enclosures – custom PCB mounts, flush front panels Bent aluminum parts – designed for real manufacturing, not just pretty pictures My strengths: Taking messy files and cleaning them up Making enclosures as thin as possible Adding clean vents, buttons, and ports Working fast and replying the same day I keep it simple. I send you the file. You check it. We fix small things.

- PM for multiple PCB CAD projects in same time. - ECAD leader for big boards ~10K parts and nets. - Team work under tight schedule and working under high preasure.

- PM for multiple PCB CAD projects in same time. - ECAD leader for big boards ~10K parts and nets. - Team work under tight schedule and working under high preasure.

Electronics and Power Systems Engineer specializing in SolidWorks 3D modeling, AutoCAD drafting, and technical design. Experienced in mechanical enclosures, electrical components, battery pack parts,... Read more

Electronics and Power Systems Engineer specializing in SolidWorks 3D modeling, AutoCAD drafting, and technical design. Experienced in mechanical enclosures, electrical components, battery pack parts, and PCB-related hardware designs. Delivers clear, accurate, and manufacturing-ready CAD models with reliable communication.

Mechatronics Engineering student (4th year, Bowen University, CGPA 4.49/5.00) who designs electronic circuits and mechanical CAD as one system rather than two jobs. I take a requirement and carry it t... Read more

Mechatronics Engineering student (4th year, Bowen University, CGPA 4.49/5.00) who designs electronic circuits and mechanical CAD as one system rather than two jobs. I take a requirement and carry it through schematic, simulation, PCB layout, and manufacturable 3D design with clear engineering documentation at every step. Electronics: analog and digital circuit design, microcontroller-based circuits (Arduino/AVR family), sensor circuits and signal conditioning, power circuits and regulation. I simulate before I build: Proteus (circuit + embedded simulation), Multisim and MATLAB/Simulink, and I validate control behavior in simulation before committing to hardware. I have produced complete schematics and PCB layouts, including component rating and thermal checks (e.g., a regulated LM317 bench supply validated to ±2% under load). CAD & mechanical: SolidWorks part and assembly modelling, engineering drawings, and stress/vibration simulation. I designed and validated a battery holder in CAD with stress and vibration simulation under operational loading, and I ran end-to-end 3D printing production workflows (Cura slicing, nozzle/bed/feed settings) for flying hardware. Embedded & control: closed-loop PID control, sensor integration, embedded C/C++/Arduino, and SCADA (I interned at the Transmission Company of Nigeria National Control Centre, monitoring national grid telemetry and doing disturbance root-cause analysis). I have MATLAB/Simulink OnRamp certificates. I am honest about scope: I state clearly what I can deliver directly and what needs a partner, so timelines don't slip. Available for remote, project-based work worldwide.

Hi! Ready for bringing your ideas and creativity to Life! I'm here to be helpful to you as well as to gain more experience. Working as a team member of “Hunarmand” Design Studio, where we offer comple... Read more

Hi! Ready for bringing your ideas and creativity to Life! I'm here to be helpful to you as well as to gain more experience. Working as a team member of “Hunarmand” Design Studio, where we offer complete solution, i.e. from Product concept-design-prototype-manufacturing, I have gained considerable knowledge and expertise in CNC, CAD/CAM, Woodworking, 3D printing, Circuit Design, PCB Design, Wood Finishing... etc. Designed, Fabricated and operated: • CNC Milling Machine (3-Axis) • Laser Engraver • 3D Printer • Wood Lathe. Looking forward to work with you! Thanks for your time.

Detail-oriented PCB Design Engineer with 10+ years of experience in high-speed multilayer PCB development for semiconductor test systems. In addition to engineering expertise, brings strong documentat... Read more

Detail-oriented PCB Design Engineer with 10+ years of experience in high-speed multilayer PCB development for semiconductor test systems. In addition to engineering expertise, brings strong documentation management, vendor coordination, workflow tracking, and process improvement skills. Experienced in supporting cross-functional teams in structured, deadline-driven environments. Offering both technical design capability and reliable remote administrative support.

I have multiple years of experience working with CAD design including OnShape and Solidworks. I have spent time working on multiple personal projects including but not limited to model cars, RC planes... Read more

I have multiple years of experience working with CAD design including OnShape and Solidworks. I have spent time working on multiple personal projects including but not limited to model cars, RC planes and drones, robotic arms, replacement parts for CNCs, and other mechanical systems.

Experienced electrical engineer and hobbyist. I have done projects in the industry for automotive, marine, and medical and have done hobby projects involved in wireless systems, embedded systems, Ard... Read more

Experienced electrical engineer and hobbyist. I have done projects in the industry for automotive, marine, and medical and have done hobby projects involved in wireless systems, embedded systems, Arduino, and various other circuits. I have experience and competency in embedded design, PCB layout, schematic capture, 3D modeling, circuit design, product development, and documentation.

I design embedded systems and hardware that work reliably in real-world conditions — not just in simulation. With 10+ years of experience, I help clients turn ideas into working prototypes and produc... Read more

I design embedded systems and hardware that work reliably in real-world conditions — not just in simulation. With 10+ years of experience, I help clients turn ideas into working prototypes and production-ready designs, combining electronics, firmware, and practical engineering. 🔧 What I can help you with: - PCB design (Altium, KiCad) – clean, manufacturable layouts - Embedded firmware (STM32, ESP32, AVR – C/C++) - Hardware development from concept to prototype - Sensor integration and communication (UART, SPI, I2C, CAN) - Debugging, optimization, and system reliability ⚙️ Mechanical + Product Design: - Fusion 360 / SolidWorks CAD modeling - Functional parts for 3D printing and manufacturing - Technical drawings for production ✅ I focus on: - Designs that fit, function, and last - Clear communication and fast iteration - Delivering files that are ready for manufacturing If you need someone who understands both electronics and real-world product constraints, I can help you build it right the first time.

I am a dedicated CAD and PCB design specialist with a strong background in creating precise, functional, and innovative solutions. I help clients transform their ideas into reality through professiona... Read more

I am a dedicated CAD and PCB design specialist with a strong background in creating precise, functional, and innovative solutions. I help clients transform their ideas into reality through professional 2D/3D CAD modeling, product development, and PCB layout design. With expertise in industry-standard tools such as AutoCAD, SolidWorks, and Altium Designer, I ensure that every project meets high standards of accuracy, manufacturability, and efficiency. My focus is always on delivering high-quality designs on time while maintaining clear communication throughout the project.