Hire the best Road Modeling experts for your company

Topographic Engineer specializing in the design and construction of roads and airstrips, certified UAS/DRONE pilot. Experienced in the planning, execution, calculation, and supervision of projects in... Read more

Topographic Engineer specializing in the design and construction of roads and airstrips, certified UAS/DRONE pilot. Experienced in the planning, execution, calculation, and supervision of projects in topographic engineering and road and airport infrastructure. Extensive knowledge in the coordination of physical, human, and economic resources for the fulfillment of engineering works and projects. Expert in the preparation of plans, topographic surveys, drawing and calculation, road designs, and cartographic digitization.

Civil engineer with experience in road construction, commercial spaces, and single-family housing projects. Skilled in BIM modeling, infrastructure design, and construction planning using Revit, AutoC... Read more

Civil engineer with experience in road construction, commercial spaces, and single-family housing projects. Skilled in BIM modeling, infrastructure design, and construction planning using Revit, AutoCAD, and Civil 3D. Passionate about delivering high-quality and efficient designs.

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disci... Read more

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disciplinary environments encompassing various domains, including water and sanitation, roads and stormwater, residential, commercial and industrial developments, as well as the construction industry. My proficiency in both local and interstate civil services and roads design has been honed through extensive involvement in an array of projects, which include but are not limited to, subdivisions design, geometric design, and bulk earthworks design. My expertise in engineering software programs spans a broad spectrum, encompassing 12d Model, Civil3D, AutoCAD, Caddie 18, Model/ Pipe/ Road Maker, and Autodesk extensions such as Infraworks and Vehicle Tracking.

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering:... Read more

Hey there, I'm Charbel Hachem, and I'm on a mission to make the world a better place, one Civil Structural Engineering feat and data project at a time! My Skill Set: 🏗️ Civil Structural Engineering: With a solid foundation in structural analysis and design, roads and highways design, traffic and transportation studies and project management, I bring experience and noteworthy achievements to the table. 📈 Data Science: I leverage data-driven insights to enhance decision-making, excelling in data analysis, machine learning, and predictive modeling, ensuring well-informed choices. 🛠️ Data Engineering: I'm proficient in constructing data pipelines, integrating datasets, maintaining databases, and implementing Big Data solutions for scalable, robust solutions. Why Choose Me? My analytical approach and interdisciplinary expertise empower me to tackle engineering and data-related challenges with precision and creative solutions. I manage projects with excellence and maintain open communication for your peace of mind. If you're seeking a professional who can provide structural engineering insights and leverage data for informed decisions, I'm here to collaborate. Let's work together to elevate your projects and drive innovation. Feel free to reach out to discuss your project or inquire about my services. I'm excited to be part of your project success story.

🎓 Civil Engineer graduate, specialized in structural modeling and urban infrastructure (VRD), with a strong academic background and hands-on experience in engineering firms. 💼 I’ve worked on various... Read more

🎓 Civil Engineer graduate, specialized in structural modeling and urban infrastructure (VRD), with a strong academic background and hands-on experience in engineering firms. 💼 I’ve worked on various infrastructure and building projects using tools like Autodesk Civil 3D, Revit, Robot Structural Analysis, Arche Ossature, and AutoCAD, while integrating technical standards and BIM workflows. 📌 My tasks included utility network design, 3D modeling, structural analysis. 🌍Adaptable, and passionate about civil engineering, I’m ready to contribute to ambitious projects as a freelancer.

I’m a Civil Engineer with 20+ years of experience in Railways, Metro Rail, Road Infrastructure, and Depot design. I specialize in using AutoCAD Civil 3D to deliver precise: -Horizontal and Vertical Al... Read more

I’m a Civil Engineer with 20+ years of experience in Railways, Metro Rail, Road Infrastructure, and Depot design. I specialize in using AutoCAD Civil 3D to deliver precise: -Horizontal and Vertical Alignment Designs -Corridor Modeling for Rail and Road Projects. -Section Sheets and Quantity Takeoff (Earthwork & BOQ). -Profile Sheets, Super Elevation, Target Surface, Assemblies. -Depot Track Layout and Optimization. -Quantity Estimations and Civil Drawings for Metro Projects I’ve led the design for Bangalore Metro Phase-2, 2A & 2B, and modeled Baiyappanahalli Depot expansion with Two Level Depot using Civil 3D. I’m available for part-time or project-based work, delivering high-quality outputs with speed and clarity. Let’s collaborate to bring precision to your infrastructure project!

I am a Civil 3D expert with 12+ years of experience in Autodesk Civil 3D for infrastructure design. My focus is on road grading, utility design (including water, sewer, and stormwater), site developme... Read more

I am a Civil 3D expert with 12+ years of experience in Autodesk Civil 3D for infrastructure design. My focus is on road grading, utility design (including water, sewer, and stormwater), site development, and stormwater management. I have a strong track record of providing high-level software support, resolving complex design challenges, and delivering customized training to clients across the civil engineering, construction, and municipal sectors. With a deep understanding of optimizing workflows, customizing design templates, and enhancing BIM (Building Information Modeling) integration with tools such as Revit and GIS, I am dedicated to helping clients maximize Civil 3D’s potential for more efficient, sustainable civil infrastructure development.

Been doing a lot of development lately My highlight project has been urban planning in my hometown. I was fortunate enough to be hired by a company that just signed a concract with my hometown city ha... Read more

Been doing a lot of development lately My highlight project has been urban planning in my hometown. I was fortunate enough to be hired by a company that just signed a concract with my hometown city hall. I gained a lot of experience since the start of this project which I had a big impact in. Before that I managed to finish a few not that big projects of rehabilitation around the county. My biggest strength is the flexibility, I can work from anywhere as I invested my money to create my personal office to work on my own projects in the future. I am passionate to learn about infrastructure and find solutions for anything. I’m looking forward to find ways to collaborate worldwide and create projects for different places. I work with Autodesk Civil 3D.

Civil Engineer with 8+ years of experience in managing public and private construction projects. Specialized in Lean Construction, BIM, and process optimization. Proven track record in cost reduction... Read more

Civil Engineer with 8+ years of experience in managing public and private construction projects. Specialized in Lean Construction, BIM, and process optimization. Proven track record in cost reduction (up to 20%), schedule acceleration (up to 15%), and implementation of innovative solutions in large-scale projects (up to BRL 5 million).

I am a Road Engineer and CAD Expert with expertise in roadway design, geometric alignment, highway planning, and detailed CAD drafting for civil infrastructure projects. With hands-on experience using... Read more

I am a Road Engineer and CAD Expert with expertise in roadway design, geometric alignment, highway planning, and detailed CAD drafting for civil infrastructure projects. With hands-on experience using AutoCAD, Civil 3D, and other civil engineering software, I deliver accurate, efficient, and professional design solutions tailored to project requirements. I specialize in: Road and highway geometric design (horizontal & vertical alignments) CAD drafting and 3D modeling for civil engineering projects Plan/profile sheets, cross-sections, and earthwork calculations Drainage layout and road safety design components Site development and grading plans As-built drawings and construction documentation Quantity estimation and detailed engineering drawings What I offer: High-quality, standards-compliant designs Fast delivery with attention to precision Clear communication and collaborative design workflow Ability to translate engineering concepts into detailed, build-ready CAD models and drawings

I am road senior engineer, 2D, 3D designer with 10 years experiance. My areas of expertise include civil engineering drawings and documentation, 3D modeling, design analysis, volume cut/fill calculati... Read more

I am road senior engineer, 2D, 3D designer with 10 years experiance. My areas of expertise include civil engineering drawings and documentation, 3D modeling, design analysis, volume cut/fill calculation, detalization design, xml files for machine control. Experience in different areas - roads, harbours, bridges. Experience working with point clouds. Education- Bachelor degree in Civil engineering (Highways and Bridges), Riga Technical University. Software- Microstation Connect edition, OpenRoads, Autocad. Projects - Latvia, Sweden, Denmark, Norway.

Hi, I have 15 years experience as AutoCAD 2D & 3D designer. I specialize in Designing of Roads, Highways, Drainage System, Canals and other Land Development like plotting, contouring, surveying etc.... Read more

Hi, I have 15 years experience as AutoCAD 2D & 3D designer. I specialize in Designing of Roads, Highways, Drainage System, Canals and other Land Development like plotting, contouring, surveying etc. I am skilled in Civil 3D, Autodesk Land Development and AutoCAD for 2D/3D designing. I am also exprienced in 3D modeling using Solidworks and AutoCAD, 3D Punch Home design. I have good creativity for conceptualising new design and also perfectionist for detailed drawing preparation. I have done designing of more than 500 kms of road including hilly/2-lane urban and highways. The scope included importing & plotting of survey points and levels, its countour generation, tracing existing alignment, Horizontal Alignment design as per speed limit, Vertical curve design and cross sectional drawing with estimation of quantity in earthwork cutting/filling. I have also worked for many generation of drawings for Residential Buildings, commercial Malls, multi story buildings etc their detailed sectional & Elevation drawing preparation. I am skilled in - 2D AutoCAD drawing detailing with section, dimention, tolerance - 3D Punch Home design - Autodesk Land Development - 3D solid Modeling using Solidworks I value quality of service by delighting customer with delivering perfection in time.

I’m a Road Design Engineer specializing in urban and highway projects, with proven expertise in AutoCAD, Civil 3D, and AI-powered design tools for faster and more accurate results. I deliver: Road ali... Read more

I’m a Road Design Engineer specializing in urban and highway projects, with proven expertise in AutoCAD, Civil 3D, and AI-powered design tools for faster and more accurate results. I deliver: Road alignments & profiles (horizontal & vertical) Cross-sections, assemblies, and corridor models Surface modeling, grading, cut & fill calculations Quantity takeoffs (BOQs) & construction drawings My experience covers intersections, roundabouts, U-turns, slip ramps, parking layouts, signing, and road markings, always ensuring compliance with international standards. I also solve technical challenges like surface conflicts, elevation mismatches, and corridor targeting issues, delivering efficient, error-free designs every time. With a passion for innovation, I integrate AI tools into my workflow to improve productivity and maintain high-quality project delivery. I’m ready to take on challenging projects and help clients bring their road design visions to life.

I am a 4th-semester Mechanical Engineering student with strong skills in advanced CAD design, particularly using SolidWorks. I’ve completed a university-level Advanced CAD course and have hands-on exp... Read more

I am a 4th-semester Mechanical Engineering student with strong skills in advanced CAD design, particularly using SolidWorks. I’ve completed a university-level Advanced CAD course and have hands-on experience designing mechanical parts and off-road vehicles such as buggies. My work includes parts like pistons and complete assemblies, all showcased on my GrabCAD profile. English is my second language (B2 certified), and I’m confident in reading, writing, and communicating technical concepts clearly. I’m always looking to grow as a designer by contributing to real-world engineering projects.

AutoCAD2D & 3D Modeling and solid works House Plans & Sections and Elevations and Interiors and Quantity estimations and Road plan and profile and road cross sections

AutoCAD2D & 3D Modeling and solid works House Plans & Sections and Elevations and Interiors and Quantity estimations and Road plan and profile and road cross sections

I am working as Civil Engineer from year 2015 as well as freelancer and having great experience in horizontal as well as in vertical structures and also in Wet-Infrastructure. Skilled and professiona... Read more

I am working as Civil Engineer from year 2015 as well as freelancer and having great experience in horizontal as well as in vertical structures and also in Wet-Infrastructure. Skilled and professional level experience in AutoCAD, Civil 3D, Revit, Openroads Designer, Infra-work, Microstation and also have experience Synchro. Worked on the following Projects - 2D and 3D modeling work for wet infrastructure projects such Sewage and Water Treatment plants and modeling of each unit of same industry. Plan and profile of Testwood (UK) road line pipe line in civil 3D Software. Plan and profile of Khultabad road project in Maharashtra. Road 3D Modeling for Samruddhi super expressway in Openroads and 4D simulation of same modeling in Synchro. AutoCAD to Microstation conversion work. 3D modeling of residential and commercial buildings in Revit and 3Ds Max. Close line - Having great experience in AutoCAD, Civil 3D and Openroads software. Hobbies - Learning the various civil engineering Softwares.

Experienced Engineer | BIM & 3D Modeling | Hydropower & Infrastructure Expertise in hydropower, infrastructure, and BIM management. With a strong background in 3D modeling (Revit, SolidWorks, Invento... Read more

Experienced Engineer | BIM & 3D Modeling | Hydropower & Infrastructure Expertise in hydropower, infrastructure, and BIM management. With a strong background in 3D modeling (Revit, SolidWorks, Inventor, AutoCAD Civil 3D) and a passion for rotating machinery, I have successfully led and contributed to complex engineering projects, from hydropower plant design to road infrastructure development. My experience includes: ✅ BIM coordination & project management ✅ Hydropower plant design & equipment selection ✅ Road & civil infrastructure projects ✅ 3D modeling, LiDAR & photogrammetry applications I am committed to delivering high-quality, efficient solutions and optimizing workflows through digital tools. Passionate about knowledge-sharing, I also develop educational programs to introduce students and professionals to engineering software and methodologies.

Louisiana Tech University 2001 - Bachelor of Achitecture with 11 years experience in professional Architecture office. 3 years experience 3D modeling/ drafting safety and pressure relief valves 1 ye... Read more

Louisiana Tech University 2001 - Bachelor of Achitecture with 11 years experience in professional Architecture office. 3 years experience 3D modeling/ drafting safety and pressure relief valves 1 year experience 3D modeling/ drafting rail road tank cars

Hey! I am a technical and artistic 3D designer with a passion for bringing digital creations into the real world. Or using CGI when time, space, and money get in the road.

Hey! I am a technical and artistic 3D designer with a passion for bringing digital creations into the real world. Or using CGI when time, space, and money get in the road.

Strength: Good Communication Skill, Positive Attitude Project: Design & Manufacturing of Off Road Vehicle for SAE BAJA Accomplishments: Research Paper on Effective Logo Design Education: B.E. (Mechani... Read more

Strength: Good Communication Skill, Positive Attitude Project: Design & Manufacturing of Off Road Vehicle for SAE BAJA Accomplishments: Research Paper on Effective Logo Design Education: B.E. (Mechanical)

Detail-oriented Civil Engineering graduate with hands-on experience in toll road construction and structural supervision. Proficient in AutoCAD, Revit, Microsoft Office, SAP2000, and PCSWMM. Strong co... Read more

Detail-oriented Civil Engineering graduate with hands-on experience in toll road construction and structural supervision. Proficient in AutoCAD, Revit, Microsoft Office, SAP2000, and PCSWMM. Strong communication and coordination skills developed through both fieldwork and freelance roles. Eager to contribute precision and technical expertise to engineering and infrastructure teams.

Bachelor Degree in Civil Engineering. Strong Experience in Road and Earthwork Design and also familiar with coal mining infrastructure

Bachelor Degree in Civil Engineering. Strong Experience in Road and Earthwork Design and also familiar with coal mining infrastructure

I have experience with Autocad since 2008. I have drew many projects (road building projects, metal construction buildings - grain dryers, elevators, hangars, transitions etc.). Experienced in work w... Read more

I have experience with Autocad since 2008. I have drew many projects (road building projects, metal construction buildings - grain dryers, elevators, hangars, transitions etc.). Experienced in work with Solidworks. Working with it since 2009. I have made many 3D drawings - grain dryers, hangars, grain transportation conveyors, copy-paste from picture to drawings, etc). I have also experience making drawings from 2D autocad to 3D Solidworks and from 3D Solidworks to 2D autocad.

MY NAME IS MUHAMMAD SHAKEEL. I AM A VERSATILE & RESULTS ORIENTED PROFESSIONAL CAD / REVIT DESIGNER & DRAFTER WITH A PROVEN TRACK RECORD IN DESIGNING & DRAFTING INDUSTRY USING LATEST TOOLS & SOFTWARE.... Read more

MY NAME IS MUHAMMAD SHAKEEL. I AM A VERSATILE & RESULTS ORIENTED PROFESSIONAL CAD / REVIT DESIGNER & DRAFTER WITH A PROVEN TRACK RECORD IN DESIGNING & DRAFTING INDUSTRY USING LATEST TOOLS & SOFTWARE. MY EXPERTISE ARE ARCHITECTURAL DESIGN / DRAWINGS (FLOOR PLANS, ELEVATIONS. SECTIONS & COMPLETE DETAILING), 3D MODELING, RENDERING & VISUALIZATION, SITE SURVEY & CONTOUR DRAWINGS, ROAD DESIGN, LANDSCAPE & SOFT CAPE, AS BUILT DRAWINGS, SINGLE LINE DIAGRAMS, PDF TO CAD OR REVIT CONVERSION, HAND SKETCH TO CAD / REVIT CONVERSION DRAWINGS.

Civil Engineer | Road Design | As-Built & Building Permits | AutoCAD & Civil 3D I'm a civil engineer specialized in road infrastructure design, with strong skills in AutoCAD and Civil 3D. I have hand... Read more

Civil Engineer | Road Design | As-Built & Building Permits | AutoCAD & Civil 3D I'm a civil engineer specialized in road infrastructure design, with strong skills in AutoCAD and Civil 3D. I have hands-on experience in both As-Built documentation and Building Permit processes, particularly within the Belgian regulatory framework. Currently, I'm working on a major infrastructure project — the Brussels Ring Road — as part of my role at Arcadis Belgium. I’m known as a clear communicator and relationship builder, able to coordinate efficiently across multidisciplinary teams. Graduated in 2019 from the Gheorghe Asachi Technical University of Iași, Romania, Faculty of Civil Engineering.

Having more than 17 years experience in design and development of mechanical components, heavy engineering design, off-road vehicle design, agricultural equipment, tool engineering

Having more than 17 years experience in design and development of mechanical components, heavy engineering design, off-road vehicle design, agricultural equipment, tool engineering

I am a passionate 2D AutoCAD designer with experience in technical drafting and road infrastructure projects. I have interned at Jasa Marga Semarang ABC and developed strong skills in design accuracy... Read more

I am a passionate 2D AutoCAD designer with experience in technical drafting and road infrastructure projects. I have interned at Jasa Marga Semarang ABC and developed strong skills in design accuracy and detail. I am also proficient in Microsoft Office, data analysis, and enjoy creative work in visual design.